HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Re: Can't sendfax from Hylafax



-----BEGIN PGP SIGNED MESSAGE-----

On Thu, 12 Nov 1998 shui@pointsnorth.com wrote:


> 3. I asked the user on the remote side to connect a normal
> phone to the jack where my fax modem is connecting now.  He
> said that there is no dial tone unless he pressed 9.  Will that cause the
> problem?
>
> 4. I tried to tip into the device and issue command: atdt9,15552255
> from there, either I get "Busy" or "No carrier" depending on
> the value of Xn set.  It will return busy if modem is set to
> X4 or "No carrier" if set to X0.

This is *ODD*.  "Hear dialing" is not enough information. He should
hear dial-tone, then a number "9" dialed, then dial tone again,
then the next eight digits.

Is it possible that your PBX doesn't like 1+7-digits, and wants the
area code dialed as well or no "1" prefix?

> Someone suggests that the PABX lines might be digital and I need analog
> lines
> in order for faxing to work.  However, I have a query here.

Use "tip" or "kermit" to test this out. If those don't work,
then nothing will work under HylaFAX.

			Nico Kadel-Garcia
			Senior Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBNktTSD/+ItycgIJRAQHCTwP+NvydH1qwduuvUlZ+YiTsC+fVHO5aKaFh
0G3e03FZSslIuBeTVJA9+l4f24ReQI3kVicQDHSRRU8Ih9Ko1xUSuowRoErbAgYA
IDGodxtZeWDNDqOulRrro9sEfIqhDqOksBDAfjSwmiQvMqRtinWuJpm8MgxDAanV
DK5zW/fxxJY=
=Kmdv
-----END PGP SIGNATURE-----




Project hosted by iFAX Solutions