![]() |
Message-ID: <3600FA56.40A4F3DD@mosaic.xs4all.be> Date: Thu, 17 Sep 1998 12:02:30 +0000 From: Didier Legein <didierlegein@mosaic.xs4all.be> Reply-To: didierlegein@mosaic.xs4all.be Organization: mosaic bvba X-Mailer: Mozilla 4.05 [en] (X11; U; Linux 2.0.31 i586) MIME-Version: 1.0 To: flexfax@sgi.com Subject: Unspecified Transmit phase b error Content-Type: text/plain; charset=iso-8859-1 X-MIME-Autoconverted: from 8bit to quoted-printable by sgi.sgi.com id DAA02444 Hi, I'm using the latest *rpm for Linux from the tpc site under Red hat 5.0., using a USR Sportster 38400 v... Receiving fax' is no problem whatsoever but just can't get the thing sendinganything. Fromm what I learned from the archives this should more be a Sportster problem than a setup problem. Can anyone confirm this ? This is the error log : Your facsimile job to 008164442797 failed because: Unspecified Transmit Phase B error; too many attempts to send ---- Transcript of session follows ---- Sep 11 14:54:05.63: [ 1978]: SESSION BEGIN 00000304 8164442797 Sep 11 14:54:05.63: [ 1978]: SEND FAX: JOB 6 DEST 008164442797 COMMID 00000304 Sep 11 14:54:05.63: [ 1978]: DELAY 2600 ms Sep 11 14:54:08.24: [ 1978]: <-- [17:ATE0V1Q0X4S0=0H0\r] Sep 11 14:54:08.38: [ 1978]: --> [2:OK] Sep 11 14:54:08.38: [ 1978]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r] Sep 11 14:54:08.52: [ 1978]: --> [2:OK] Sep 11 14:54:08.52: [ 1978]: <-- [14:AT+FCLASS=2.0\r] Sep 11 14:54:08.66: [ 1978]: --> [2:OK] Sep 11 14:54:08.66: [ 1978]: <-- [9:AT+FLO=2\r] Sep 11 14:54:08.80: [ 1978]: --> [2:OK] Sep 11 14:54:08.80: [ 1978]: <-- [9:AT+FPP=0\r] Sep 11 14:54:08.94: [ 1978]: --> [2:OK] Sep 11 14:54:08.94: [ 1978]: <-- [9:AT+FBO=0\r] Sep 11 14:54:09.08: [ 1978]: --> [2:OK] Sep 11 14:54:09.08: [ 1978]: <-- [10:AT+FCT=30\r] Sep 11 14:54:09.22: [ 1978]: --> [2:OK] Sep 11 14:54:09.22: [ 1978]: <-- [15:AT+FNR=1,1,1,1\r] Sep 11 14:54:09.36: [ 1978]: --> [2:OK] Sep 11 14:54:09.36: [ 1978]: <-- [9:AT+FIE=0\r] Sep 11 14:54:09.50: [ 1978]: --> [2:OK] Sep 11 14:54:09.50: [ 1978]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r] Sep 11 14:54:09.64: [ 1978]: --> [2:OK] Sep 11 14:54:09.64: [ 1978]: <-- [5:ATM0\r] Sep 11 14:54:09.77: [ 1978]: --> [2:OK] Sep 11 14:54:09.77: [ 1978]: <-- [14:AT+FCLASS=2.0\r] Sep 11 14:54:10.01: [ 1978]: --> [2:OK] Sep 11 14:54:10.01: [ 1978]: <-- [9:AT+FLO=2\r] Sep 11 14:54:10.25: [ 1978]: --> [2:OK] Sep 11 14:54:10.25: [ 1978]: <-- [9:AT+FPP=0\r] Sep 11 14:54:10.49: [ 1978]: --> [2:OK] Sep 11 14:54:10.49: [ 1978]: <-- [9:AT+FBO=0\r] Sep 11 14:54:10.73: [ 1978]: --> [2:OK] Sep 11 14:54:10.73: [ 1978]: <-- [10:AT+FCT=30\r] Sep 11 14:54:10.97: [ 1978]: --> [2:OK] Sep 11 14:54:10.97: [ 1978]: <-- [15:AT+FNR=1,1,1,1\r] Sep 11 14:54:11.21: [ 1978]: --> [2:OK] Sep 11 14:54:11.21: [ 1978]: <-- [9:AT+FIE=0\r] Sep 11 14:54:11.45: [ 1978]: --> [2:OK] Sep 11 14:54:11.45: [ 1978]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r] Sep 11 14:54:11.69: [ 1978]: --> [2:OK] Sep 11 14:54:11.69: [ 1978]: <-- [30:AT+FLI="Hello, from mosaic b"\r] Sep 11 14:54:11.93: [ 1978]: --> [2:OK] Sep 11 14:54:11.95: [ 1978]: DIAL 008164442797 Sep 11 14:54:11.96: [ 1978]: <-- [17:ATDT008164442797\r] Sep 11 14:54:33.35: [ 1978]: --> [4:+FCO] Sep 11 14:54:36.73: [ 1978]: --> [22:+FNF:+FNF:+FCI:" ] Sep 11 14:54:36.73: [ 1978]: REMOTE NSF "+FNF:+FCI:"" Sep 11 14:54:36.73: [ 1978]: --> [32: 064442797"+FIS:1,5,1,2,1,] Sep 11 14:54:36.73: [ 1978]: --> [47:,0,3YB(��B�a�qY�c?N�f��B�a?ԩ'%-��*r��d+?�*j] Sep 11 14:55:16.73: [ 1978]: REMOTE HANGUP: Unspecified Transmit Phase B error (code 20) Sep 11 14:55:16.73: [ 1978]: SEND FAILED: Unspecified Transmit Phase B error Sep 11 14:55:16.73: [ 1978]: SEND FAILED: Unspecified Transmit Phase B error; too many attempts to send Sep 11 14:55:16.73: [ 1978]: <-- [5:ATH0\r] Sep 11 14:55:16.97: [ 1978]: --> [4:ATH0] Sep 11 14:55:16.97: [ 1978]: --> [2:OK] Sep 11 14:55:16.97: [ 1978]: SESSION END ---- Unsent job status ---- Destination: 008164442797 JobID: 6 GroupID: 6 Sender: Didier Legein Mailaddr: didierlegein@mosaic.xs4all.be CommID: 00000304 Submitted From: mosaic.xs4all.be Page Width: 215 (mm) Page Length: 279 (mm) Resolution: 196 (lpi) Status: Unspecified Transmit Phase B error; too many attempts to send Dialogs: 3 (exchanges with remote device) Dials: 0 (consecutive failed calls to destination) Calls: 3 (total phone calls placed) Pages: 0 (pages transmitted) TotPages: 2 (total pages to transmit) Attempts: 0 (attempts to send current page) Dirnum: 0 (directory of next page to send)