flexfax: Paging Problem

[Cuong Phan <Cuong.Phan@sodium.crs.com>]

	When I send a page I get this error message. I don't know what exactly
it is looking for. It seems to be pulling the correct infomation from my
pagermap file, so I don't know what else it could be. Can you help? Here
is my log.

May 21 22:23:35.86: [21370]: SESSION BEGIN 00000032 18009464644
May 21 22:23:35.86: [21370]: SEND PAGE: JOB 37 DEST 18009464644  COMMID
00000032
May 21 22:23:35.86: [21370]: DELAY 2600 ms
May 21 22:23:38.47: [21370]: <-- [17:ATE0V1Q0X4S0=0H0\r]
May 21 22:23:38.63: [21370]: --> [16:ATE0V1Q0X4S0=0H0]
May 21 22:23:38.63: [21370]: --> [2:OK]
May 21 22:23:38.64: [21370]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
May 21 22:23:38.80: [21370]: --> [2:OK]
May 21 22:23:38.80: [21370]: <-- [5:ATM0\r]
May 21 22:23:38.97: [21370]: --> [2:OK]
May 21 22:23:39.02: [21370]: <-- [12:AT+FCLASS=0\r]
May 21 22:23:39.16: [21370]: --> [2:OK]
May 21 22:23:39.16: [21370]: DIAL 18009464644
May 21 22:23:39.17: [21370]: <-- [16:ATDT18009464644\r]
May 21 22:23:57.30: [21370]: --> [12:CONNECT 1200]
May 21 22:23:57.30: [21370]: EXPECT ID (paging central identification)
May 21 22:24:17.31: [21370]: PAGE FAILED: No initial ID response from
paging central
May 21 22:24:17.31: [21370]: PAGE FAILED: No initial ID response from
paging central; too many attempts to
 send
May 21 22:24:17.31: [21370]: <-- [5:ATH0\r]
May 21 22:24:22.31: [21370]: MODEM <Timeout>
May 21 22:24:22.31: [21370]: SESSION END