flexfax: sendpage problems continued

[Mike Pistone <mpistone@eurekanet.com>]

Here is what I get with the IXO debugging

It looks like the ATH0 line right after CONNECT 1200 is the problem.
Why is the program hanging up?
Just for the record,  I can send pages just fine with this modem from
Windows 95 software so it is not the modem....

ANY HELP?  Please??

Nov 24 18:34:11.20: [10165]: SESSION BEGIN 00001282 18006116532
Nov 24 18:34:11.20: [10165]: MODEM set DTR OFF
Nov 24 18:34:13.81: [10165]: MODEM set DTR ON
Nov 24 18:34:13.81: [10165]: MODEM set baud rate: 19200 baud,input 	flow
XON/XOFF, output flow XON/XOFF
Nov 24 18:34:13.81: [10165]: MODEM flush i/o
Nov 24 18:34:13.81: [10165]: <-- [15:ATE0V1Q0S0=0H0\r]
Nov 24 18:34:13.82: [10165]: --> [2:OK]
Nov 24 18:34:13.82: [10165]: <-- [21:ATS8=2S7=60&K4&D2&C1\r]
Nov 24 18:34:13.84: [10165]: --> [2:OK]
Nov 24 18:34:13.84: [10165]: <-- [5:ATM0\r]
Nov 24 18:34:13.85: [10165]: --> [2:OK]
Nov 24 18:34:13.85: [10165]: MODEM set parity: 7 bits, even parity
Nov 24 18:34:13.85: [10165]: MODEM input buffering enabled
Nov 24 18:34:13.92: [10165]: <-- [12:AT+FCLASS=0\r]
Nov 24 18:34:14.03: [10165]: --> [2:OK]
Nov 24 18:34:14.03: [10165]: <-- [28:ATE0B0S37=5N0W2&Q0F4M1L1\N1\r]
Nov 24 18:34:14.15: [10165]: --> [2:OK]
Nov 24 18:34:14.15: [10165]: <-- [17:ATDT18006116532@\r]
Nov 24 18:34:29.11: [10165]: --> [12:CARRIER 1200]
Nov 24 18:34:29.11: [10165]: <-- [5:ATH0\r]
Nov 24 18:34:34.11: [10165]: MODEM TIMEOUT: reading line from modem
Nov 24 18:34:34.11: [10165]: MODEM <Timeout>
Nov 24 18:34:34.11: [10165]: MODEM input buffering enabled
Nov 24 18:34:34.12: [10165]: MODEM set DTR OFF
Nov 24 18:34:34.12: [10165]: SESSION END

-------------------------------------------------------------
Mike Pistone                            pistone@eurekanet.com
Systems/Network Administrator                 ph 614.593-5052
Eureka Networks, Ltd.                         fx 614.594-3632