RE: flexfax: sendpage problems continued

["Gary Ng (Winclient)" <garyn@winclient.com>]

Just curious, are you sending fax ? AT+FCLASS=0
is for data.

Gary

> ----------
> From: 	Mike Pistone[SMTP:mpistone@eurekanet.com]
> Sent: 	Tuesday, November 25, 1997 5:46 AM
> To: 	flexfax@sgi.com
> Subject: 	flexfax: sendpage problems continued
> 
> Here is what I get with the IXO debugging
> 
> It looks like the ATH0 line right after CONNECT 1200 is the problem.
> Why is the program hanging up?
> Just for the record,  I can send pages just fine with this modem from
> Windows 95 software so it is not the modem....
> 
> ANY HELP?  Please??
> 
> Nov 24 18:34:11.20: [10165]: SESSION BEGIN 00001282 18006116532
> Nov 24 18:34:11.20: [10165]: MODEM set DTR OFF
> Nov 24 18:34:13.81: [10165]: MODEM set DTR ON
> Nov 24 18:34:13.81: [10165]: MODEM set baud rate: 19200 baud,input
> flow
> XON/XOFF, output flow XON/XOFF
> Nov 24 18:34:13.81: [10165]: MODEM flush i/o
> Nov 24 18:34:13.81: [10165]: <-- [15:ATE0V1Q0S0=0H0\r]
> Nov 24 18:34:13.82: [10165]: --> [2:OK]
> Nov 24 18:34:13.82: [10165]: <-- [21:ATS8=2S7=60&K4&D2&C1\r]
> Nov 24 18:34:13.84: [10165]: --> [2:OK]
> Nov 24 18:34:13.84: [10165]: <-- [5:ATM0\r]
> Nov 24 18:34:13.85: [10165]: --> [2:OK]
> Nov 24 18:34:13.85: [10165]: MODEM set parity: 7 bits, even parity
> Nov 24 18:34:13.85: [10165]: MODEM input buffering enabled
> Nov 24 18:34:13.92: [10165]: <-- [12:AT+FCLASS=0\r]
> Nov 24 18:34:14.03: [10165]: --> [2:OK]
> Nov 24 18:34:14.03: [10165]: <-- [28:ATE0B0S37=5N0W2&Q0F4M1L1\N1\r]
> Nov 24 18:34:14.15: [10165]: --> [2:OK]
> Nov 24 18:34:14.15: [10165]: <-- [17:ATDT18006116532@\r]
> Nov 24 18:34:29.11: [10165]: --> [12:CARRIER 1200]
> Nov 24 18:34:29.11: [10165]: <-- [5:ATH0\r]
> Nov 24 18:34:34.11: [10165]: MODEM TIMEOUT: reading line from modem
> Nov 24 18:34:34.11: [10165]: MODEM <Timeout>
> Nov 24 18:34:34.11: [10165]: MODEM input buffering enabled
> Nov 24 18:34:34.12: [10165]: MODEM set DTR OFF
> Nov 24 18:34:34.12: [10165]: SESSION END
> 
> -------------------------------------------------------------
> Mike Pistone                            pistone@eurekanet.com
> Systems/Network Administrator                 ph 614.593-5052
> Eureka Networks, Ltd.                         fx 614.594-3632
>