flexfax: WHY? :) facsimile not received

[Greg Nicholson <greg@d0gz.net>]

	Greetings all,

		I've been having problems receiving faxes recently with the following
transcript as the reason why.  I don't understand why it's not an
acceptable TSI, and what do I need to do in order to change HylaFAX to
recieve this type?

	Modem is a USR 28.8 VI... I know, not the best one to be using, in FCLASS
2.0.

HylaFAX Version 4.0pl1 running on Redhat 4.2

Thanks!

Greg Nicholson

   --------------------------------------
An attempt to receive facsimile on ttyS1 failed because:

��� 

��� ---- Transcript of session follows ----

Nov 04 13:24:23.26: [� 286]: SESSION BEGIN 00000204 16157943696
Nov 04 13:24:23.26: [� 286]: <-- [4:ATA\r]
Nov 04 13:24:30.55: [� 286]: --> [4:+FCO]
Nov 04 13:24:30.55: [� 286]: ANSWER: FAX CONNECTION
Nov 04 13:24:30.56: [� 286]: RECV FAX: begin
Nov 04 13:24:32.21: [� 286]: --> [27:+FTI:"��������� 6174407072"]
Nov 04 13:24:32.21: [� 286]: REMOTE TSI "6174407072"
Nov 04 13:24:32.49: [� 286]: --> [20:+FCS:0,5,0,2,0,0,0,0]
Nov 04 13:24:32.49: [� 286]: REMOTE wants 14400 bit/s
Nov 04 13:24:32.49: [� 286]: REMOTE wants page width 1728 pixels in 215 mm
Nov 04 13:24:32.50: [� 286]: REMOTE wants unlimited page length 
Nov 04 13:24:32.50: [� 286]: REMOTE wants 3.85 line/mm
Nov 04 13:24:32.50: [� 286]: REMOTE wants 1-D MR
Nov 04 13:24:32.61: [� 286]: --> [2:OK]
Nov 04 13:24:32.62: [� 286]: REJECT TSI "6174407072"
Nov 04 13:24:32.63: [� 286]: RECV FAX (00000204): recvq/fax00004.tif from
6174407072, route to <unspecified>, 0 pages in 0:02
Nov 04 13:24:32.65: [� 286]: RECV FAX: Permission denied (unacceptable
client TSI)
Nov 04 13:24:32.65: [� 286]: <-- [7:AT+FKS\r]
Nov 04 13:25:02.65: [� 286]: MODEM <Timeout>
Nov 04 13:25:02.66: [� 286]: RECV FAX: bin/faxrcvd "recvq/fax00004.tif"
"ttyS1" "00000204" ""