 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
5:ERROR?
- To: flexfax@sgi.com
- Subject: 5:ERROR?
- From: Roman Pavlik <Roman.Pavlik@www.cz>
- Date: Tue, 25 Mar 1997 10:11:36 +0100
Hi,
we use hylafax Version 4.0pl1 with ZyXEL U-1496E (V 6.14M) on SGI Indy
Irix 6.2.
we are using rtscts flow control modem is set to Class 2.0
We are not able to send fax to some fax machines. In our log file the
following
line appers:
Be 25 09:59:57.79: [ 8060]: <-- data [112]
Be 25 09:59:59.98: [ 8060]: SENT 18544 bytes of data
Be 25 09:59:59.98: [ 8060]: SEND 1D RTC
Be 25 09:59:59.98: [ 8060]: <-- data [9]
Be 25 10:00:00.64: [ 8060]: SEND end page
Be 25 10:00:00.64: [ 8060]: SEND send EOP (no more pages or documents)
Be 25 10:00:00.64: [ 8060]: <-- data [2]
Be 25 10:00:12.83: [ 8060]: --> [5:ERROR]
Be 25 10:00:12.83: [ 8060]: SEND recv RTN (retrain negative)
Does anybody meet this problem? What 5:ERROR means?
(When I try to send fax to this destination form our *very old* fax
machine, it
work fine...).
Any help will be very appreciated
--
Roman Pavlik e-mail:Roman.Pavlik@www.cz
http://www.cz
SkyNet, s.r.o. TIS Authorized Security Partner
Kabatnikova 5 tel: +420 5 41 24 59 79
602 00 Brno fax: +420 5 41 24 59 82
Czech Republic
LogFacility: daemon
CountryCode: 420
AreaCode: 5
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: etc/dialrules
ServerTracing: 1
B�e 25 09:58:09.90: [ 8060]: SESSION BEGIN 00000259 420541211206
B�e 25 09:58:09.90: [ 8060]: SEND FAX: JOB 139 DEST +420541211206 COMMID 00000259
B�e 25 09:58:09.90: [ 8060]: DELAY 2600 ms
B�e 25 09:58:12.51: [ 8060]: <-- [44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
B�e 25 09:58:12.68: [ 8060]: --> [2:OK]
B�e 25 09:58:12.68: [ 8060]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
B�e 25 09:58:12.69: [ 8060]: --> [2:OK]
B�e 25 09:58:12.69: [ 8060]: <-- [14:AT+FCLASS=2.0\r]
B�e 25 09:58:12.78: [ 8060]: --> [2:OK]
B�e 25 09:58:12.78: [ 8060]: <-- [9:AT+FLO=2\r]
B�e 25 09:58:12.79: [ 8060]: --> [2:OK]
B�e 25 09:58:12.79: [ 8060]: <-- [9:AT+FPP=0\r]
B�e 25 09:58:12.80: [ 8060]: --> [2:OK]
B�e 25 09:58:12.80: [ 8060]: <-- [9:AT+FBO=0\r]
B�e 25 09:58:12.80: [ 8060]: --> [2:OK]
B�e 25 09:58:12.81: [ 8060]: <-- [10:AT+FCT=30\r]
B�e 25 09:58:12.81: [ 8060]: --> [2:OK]
B�e 25 09:58:12.81: [ 8060]: <-- [15:AT+FNR=1,1,1,1\r]
B�e 25 09:58:12.82: [ 8060]: --> [2:OK]
B�e 25 09:58:12.82: [ 8060]: <-- [9:AT+FIE=0\r]
B�e 25 09:58:12.83: [ 8060]: --> [2:OK]
B�e 25 09:58:12.83: [ 8060]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
B�e 25 09:58:12.84: [ 8060]: --> [2:OK]
B�e 25 09:58:12.84: [ 8060]: <-- [7:ATM1L3\r]
B�e 25 09:58:12.85: [ 8060]: --> [2:OK]
B�e 25 09:58:12.86: [ 8060]: <-- [14:AT+FCLASS=2.0\r]
B�e 25 09:58:13.04: [ 8060]: --> [2:OK]
B�e 25 09:58:13.04: [ 8060]: <-- [9:AT+FLO=2\r]
B�e 25 09:58:13.14: [ 8060]: --> [2:OK]
B�e 25 09:58:13.14: [ 8060]: <-- [9:AT+FPP=0\r]
B�e 25 09:58:13.24: [ 8060]: --> [2:OK]
B�e 25 09:58:13.24: [ 8060]: <-- [9:AT+FBO=0\r]
B�e 25 09:58:13.34: [ 8060]: --> [2:OK]
B�e 25 09:58:13.34: [ 8060]: <-- [10:AT+FCT=30\r]
B�e 25 09:58:13.44: [ 8060]: --> [2:OK]
B�e 25 09:58:13.44: [ 8060]: <-- [15:AT+FNR=1,1,1,1\r]
B�e 25 09:58:13.54: [ 8060]: --> [2:OK]
B�e 25 09:58:13.54: [ 8060]: <-- [9:AT+FIE=0\r]
B�e 25 09:58:13.64: [ 8060]: --> [2:OK]
B�e 25 09:58:13.64: [ 8060]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
B�e 25 09:58:13.74: [ 8060]: --> [2:OK]
B�e 25 09:58:13.74: [ 8060]: <-- [23:AT+FLI="SkyNet,s.r.o."\r]
B�e 25 09:58:13.84: [ 8060]: --> [2:OK]
B�e 25 09:58:13.85: [ 8060]: DIAL 41211206
B�e 25 09:58:13.85: [ 8060]: <-- [13:ATDP41211206\r]
B�e 25 09:58:42.23: [ 8060]: --> [4:+FCO]
B�e 25 09:58:42.33: [ 8060]: --> [142:+FNF:00 00 51 00 00 00 A1 0A 4A A2 4A F2 6A 74 CA 2A 4A F2 52 74 22 A2 D2 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 41 06 FF FF 00 00 ]
B�e 25 09:58:42.33: [ 8060]: REMOTE NSF "00 00 51 00 00 00 A1 0A 4A A2 4A F2 6A 74 CA 2A 4A F2 52 74 22 A2 D2 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 41 06 FF FF 00 00"
B�e 25 09:58:42.33: [ 8060]: --> [26:+FCI: ]
B�e 25 09:58:42.33: [ 8060]: REMOTE CSI ""
B�e 25 09:58:42.33: [ 8060]: --> [20:+FIS:1,3,0,2,0,0,0,3]
B�e 25 09:58:42.33: [ 8060]: --> [2:OK]
B�e 25 09:58:42.33: [ 8060]: REMOTE best rate 9600 bit/s
B�e 25 09:58:42.33: [ 8060]: REMOTE max page width 1728 pixels in 215 mm
B�e 25 09:58:42.34: [ 8060]: REMOTE max unlimited page length
B�e 25 09:58:42.34: [ 8060]: REMOTE best vres 7.7 line/mm
B�e 25 09:58:42.34: [ 8060]: REMOTE best format 1-D MR
B�e 25 09:58:42.34: [ 8060]: REMOTE best 10 ms/scanline
B�e 25 09:58:42.34: [ 8060]: USE 9600 bit/s
B�e 25 09:58:42.34: [ 8060]: USE 10 ms/scanline
B�e 25 09:58:42.34: [ 8060]: SEND file "docq/doc380.ps;30"
B�e 25 09:58:42.35: [ 8060]: USE page width 1728 pixels in 215 mm
B�e 25 09:58:42.35: [ 8060]: USE unlimited page length
B�e 25 09:58:42.35: [ 8060]: USE 3.85 line/mm
B�e 25 09:58:42.35: [ 8060]: USE 1-D MR
B�e 25 09:58:42.35: [ 8060]: <-- [23:AT+FIS=0,3,0,2,0,0,0,3\r]
B�e 25 09:58:42.46: [ 8060]: --> [2:OK]
B�e 25 09:58:42.46: [ 8060]: <-- [7:AT+FDT\r]
B�e 25 09:58:48.39: [ 8060]: --> [20:+FCS:0,3,0,2,0,0,0,3]
B�e 25 09:58:48.39: [ 8060]: --> [7:CONNECT]
B�e 25 09:58:48.39: [ 8060]: SEND begin page
B�e 25 09:58:48.40: [ 8060]: <-- data [1028]
B�e 25 09:58:48.40: [ 8060]: <-- data [1029]
B�e 25 09:58:48.40: [ 8060]: <-- data [1029]
B�e 25 09:58:48.41: [ 8060]: <-- data [1029]
B�e 25 09:58:48.67: [ 8060]: <-- data [1026]
B�e 25 09:58:48.94: [ 8060]: <-- data [1031]
B�e 25 09:58:49.21: [ 8060]: <-- data [1030]
B�e 25 09:58:49.48: [ 8060]: <-- data [1026]
B�e 25 09:58:49.75: [ 8060]: <-- data [1027]
B�e 25 09:58:50.02: [ 8060]: <-- data [1026]
B�e 25 09:58:50.29: [ 8060]: <-- data [1027]
B�e 25 09:58:50.56: [ 8060]: <-- data [1027]
B�e 25 09:58:52.36: [ 8060]: <-- data [1025]
B�e 25 09:58:53.06: [ 8060]: <-- data [1028]
B�e 25 09:58:54.28: [ 8060]: <-- data [1025]
B�e 25 09:58:55.00: [ 8060]: <-- data [1028]
B�e 25 09:58:56.15: [ 8060]: <-- data [1024]
B�e 25 09:58:56.86: [ 8060]: <-- data [1024]
B�e 25 09:58:57.56: [ 8060]: <-- data [112]
B�e 25 09:58:59.75: [ 8060]: SENT 18544 bytes of data
B�e 25 09:58:59.75: [ 8060]: SEND 1D RTC
B�e 25 09:58:59.75: [ 8060]: <-- data [9]
B�e 25 09:59:00.40: [ 8060]: SEND end page
B�e 25 09:59:00.41: [ 8060]: SEND send EOP (no more pages or documents)
B�e 25 09:59:00.41: [ 8060]: <-- data [2]
B�e 25 09:59:12.60: [ 8060]: --> [5:ERROR]
B�e 25 09:59:12.60: [ 8060]: SEND recv RTN (retrain negative)
B�e 25 09:59:12.60: [ 8060]: <-- [7:AT+FDT\r]
B�e 25 09:59:18.51: [ 8060]: --> [20:+FCS:0,3,0,2,0,0,0,3]
B�e 25 09:59:18.51: [ 8060]: --> [7:CONNECT]
B�e 25 09:59:18.51: [ 8060]: SEND begin page
B�e 25 09:59:18.51: [ 8060]: <-- data [1028]
B�e 25 09:59:18.52: [ 8060]: <-- data [1029]
B�e 25 09:59:18.52: [ 8060]: <-- data [1029]
B�e 25 09:59:18.52: [ 8060]: <-- data [1029]
B�e 25 09:59:18.79: [ 8060]: <-- data [1026]
B�e 25 09:59:19.06: [ 8060]: <-- data [1031]
B�e 25 09:59:19.32: [ 8060]: <-- data [1030]
B�e 25 09:59:19.59: [ 8060]: <-- data [1026]
B�e 25 09:59:19.86: [ 8060]: <-- data [1027]
B�e 25 09:59:20.13: [ 8060]: <-- data [1026]
B�e 25 09:59:20.40: [ 8060]: <-- data [1027]
B�e 25 09:59:20.67: [ 8060]: <-- data [1027]
B�e 25 09:59:22.48: [ 8060]: <-- data [1025]
B�e 25 09:59:23.18: [ 8060]: <-- data [1028]
B�e 25 09:59:24.40: [ 8060]: <-- data [1025]
B�e 25 09:59:25.13: [ 8060]: <-- data [1028]
B�e 25 09:59:26.27: [ 8060]: <-- data [1024]
B�e 25 09:59:26.99: [ 8060]: <-- data [1024]
B�e 25 09:59:27.68: [ 8060]: <-- data [112]
B�e 25 09:59:29.87: [ 8060]: SENT 18544 bytes of data
B�e 25 09:59:29.87: [ 8060]: SEND 1D RTC
B�e 25 09:59:29.87: [ 8060]: <-- data [9]
B�e 25 09:59:30.52: [ 8060]: SEND end page
B�e 25 09:59:30.53: [ 8060]: SEND send EOP (no more pages or documents)
B�e 25 09:59:30.53: [ 8060]: <-- data [2]
B�e 25 09:59:42.72: [ 8060]: --> [5:ERROR]
B�e 25 09:59:42.72: [ 8060]: SEND recv RTN (retrain negative)
B�e 25 09:59:42.72: [ 8060]: <-- [7:AT+FDT\r]
B�e 25 09:59:48.62: [ 8060]: --> [20:+FCS:0,3,0,2,0,0,0,3]
B�e 25 09:59:48.62: [ 8060]: --> [7:CONNECT]
B�e 25 09:59:48.62: [ 8060]: SEND begin page
B�e 25 09:59:48.62: [ 8060]: <-- data [1028]
B�e 25 09:59:48.63: [ 8060]: <-- data [1029]
B�e 25 09:59:48.63: [ 8060]: <-- data [1029]
B�e 25 09:59:48.63: [ 8060]: <-- data [1029]
B�e 25 09:59:48.90: [ 8060]: <-- data [1026]
B�e 25 09:59:49.17: [ 8060]: <-- data [1031]
B�e 25 09:59:49.44: [ 8060]: <-- data [1030]
B�e 25 09:59:49.70: [ 8060]: <-- data [1026]
B�e 25 09:59:49.97: [ 8060]: <-- data [1027]
B�e 25 09:59:50.24: [ 8060]: <-- data [1026]
B�e 25 09:59:50.51: [ 8060]: <-- data [1027]
B�e 25 09:59:50.78: [ 8060]: <-- data [1027]
B�e 25 09:59:52.59: [ 8060]: <-- data [1025]
B�e 25 09:59:53.29: [ 8060]: <-- data [1028]
B�e 25 09:59:54.51: [ 8060]: <-- data [1025]
B�e 25 09:59:55.24: [ 8060]: <-- data [1028]
B�e 25 09:59:56.38: [ 8060]: <-- data [1024]
B�e 25 09:59:57.10: [ 8060]: <-- data [1024]
B�e 25 09:59:57.79: [ 8060]: <-- data [112]
B�e 25 09:59:59.98: [ 8060]: SENT 18544 bytes of data
B�e 25 09:59:59.98: [ 8060]: SEND 1D RTC
B�e 25 09:59:59.98: [ 8060]: <-- data [9]
B�e 25 10:00:00.64: [ 8060]: SEND end page
B�e 25 10:00:00.64: [ 8060]: SEND send EOP (no more pages or documents)
B�e 25 10:00:00.64: [ 8060]: <-- data [2]
B�e 25 10:00:12.83: [ 8060]: --> [5:ERROR]
B�e 25 10:00:12.83: [ 8060]: SEND recv RTN (retrain negative)
B�e 25 10:00:12.83: [ 8060]: <-- [7:AT+FKS\r]
B�e 25 10:00:14.26: [ 8060]: --> [7:+FHS:02]
B�e 25 10:00:14.26: [ 8060]: REMOTE HANGUP: Call aborted, from +FK or <CAN> (code 2)
B�e 25 10:00:14.26: [ 8060]: --> [5:ERROR]
B�e 25 10:00:14.26: [ 8060]: MODEM Command error
B�e 25 10:00:14.26: [ 8060]: <-- [5:ATH0\r]
B�e 25 10:00:14.62: [ 8060]: --> [10:NO CARRIER]
B�e 25 10:00:14.62: [ 8060]: MODEM No carrier
B�e 25 10:00:14.63: [ 8060]: SESSION END
- Prev by Date: Re: sendpage hangs
- Next by Date: 5:ERROR, [64:^S^Q^S^Q^S^Q
- Prev by thread: ANNOUNCE AIX HylaFAX 4.0pl1 Binaries available
- Next by thread: 5:ERROR, [64:^S^Q^S^Q^S^Q
- Index(es):
Project hosted by iFAX Solutions