Retrain Negative Message??

["Wolfgang Baudler" <baudler@lulu.gsf.de>]

Hi,

I still have problems with HylaFAX 4.0pl1 (running on SGI Indy IRIX 6.2)
with an Zyxel-2864 Firmware Rev. V 1.15 :

When connecting to certain FAX machines I get the following error:

Mar 18 10:16:06.33: [ 1243]: SEND send EOP (no more pages or documents)
Mar 18 10:16:06.33: [ 1243]: <-- data [2]
Mar 18 10:16:16.18: [ 1243]: --> [5:ERROR]
Mar 18 10:16:16.18: [ 1243]: SEND recv RTN (retrain negative)

This is very annoying and it would be really great, if someone has a
solution for this. (95% of the connections are OK...)

Here is the complete Log of such a session:

Mar 18 10:15:26.87: [ 1243]: SESSION BEGIN 00000843 05151185441
Mar 18 10:15:26.87: [ 1243]: SEND FAX: JOB 216 DEST 005151185441 COMMID
00000843
Mar 18 10:15:26.87: [ 1243]: DELAY 2600 ms
Mar 18 10:15:29.47: [ 1243]: <-- [39:AT&B1&N0&S0*F0S18=4S38.3=1E0V1Q0S0=0H0\r]
Mar 18 10:15:29.63: [ 1243]: --> [2:OK]
Mar 18 10:15:29.63: [ 1243]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
Mar 18 10:15:29.65: [ 1243]: --> [2:OK]
Mar 18 10:15:29.65: [ 1243]: <-- [14:AT+FCLASS=2.0\r]
Mar 18 10:15:29.66: [ 1243]: --> [2:OK]
Mar 18 10:15:29.66: [ 1243]: <-- [9:AT+FLO=2\r]
Mar 18 10:15:29.67: [ 1243]: --> [2:OK]
Mar 18 10:15:29.67: [ 1243]: <-- [9:AT+FPP=0\r]
Mar 18 10:15:29.68: [ 1243]: --> [2:OK]
Mar 18 10:15:29.68: [ 1243]: <-- [9:AT+FBO=0\r]
Mar 18 10:15:29.69: [ 1243]: --> [2:OK]
Mar 18 10:15:29.69: [ 1243]: <-- [10:AT+FCT=30\r]
Mar 18 10:15:29.70: [ 1243]: --> [2:OK]
Mar 18 10:15:29.70: [ 1243]: <-- [15:AT+FNR=1,1,1,1\r]
Mar 18 10:15:29.71: [ 1243]: --> [2:OK]
Mar 18 10:15:29.71: [ 1243]: <-- [9:AT+FIE=0\r]
Mar 18 10:15:29.72: [ 1243]: --> [2:OK]
Mar 18 10:15:29.72: [ 1243]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Mar 18 10:15:29.73: [ 1243]: --> [2:OK]
Mar 18 10:15:29.73: [ 1243]: <-- [5:ATM0\r]
Mar 18 10:15:29.74: [ 1243]: --> [2:OK]
Mar 18 10:15:29.74: [ 1243]: <-- [14:AT+FCLASS=2.0\r]
Mar 18 10:15:29.85: [ 1243]: --> [2:OK]
Mar 18 10:15:29.85: [ 1243]: <-- [9:AT+FLO=2\r]
Mar 18 10:15:29.95: [ 1243]: --> [2:OK]
Mar 18 10:15:29.95: [ 1243]: <-- [9:AT+FPP=0\r]
Mar 18 10:15:30.05: [ 1243]: --> [2:OK]
Mar 18 10:15:30.05: [ 1243]: <-- [9:AT+FBO=0\r]
Mar 18 10:15:30.15: [ 1243]: --> [2:OK]
Mar 18 10:15:30.15: [ 1243]: <-- [10:AT+FCT=30\r]
Mar 18 10:15:30.25: [ 1243]: --> [2:OK]
Mar 18 10:15:30.25: [ 1243]: <-- [15:AT+FNR=1,1,1,1\r]
Mar 18 10:15:30.35: [ 1243]: --> [2:OK]
Mar 18 10:15:30.35: [ 1243]: <-- [9:AT+FIE=0\r]
Mar 18 10:15:30.45: [ 1243]: --> [2:OK]
Mar 18 10:15:30.45: [ 1243]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Mar 18 10:15:30.56: [ 1243]: --> [2:OK]
Mar 18 10:15:30.56: [ 1243]: <-- [25:AT+FLI="+49.89.XXXXXXXX"\r]
Mar 18 10:15:30.67: [ 1243]: --> [2:OK]
Mar 18 10:15:30.67: [ 1243]: DIAL 0W05151185441
Mar 18 10:15:30.68: [ 1243]: <-- [18:ATDT0W05151185441\r]
Mar 18 10:15:50.76: [ 1243]: --> [4:+FCO]
Mar 18 10:15:50.77: [ 1243]: --> [112:+FNF:00 00 25 00 00 00 12 10 4D 02 00 50
00 2A B8 28 00 00 25 01 31 34 4B 20 4C 4F 4F 50 45 43 49 56 52 45 53   ]
Mar 18 10:15:50.78: [ 1243]: REMOTE NSF "00 00 25 00 00 00 12 10 4D 02 00 50 00
2A B8 28 00 00 25 01 31 34 4B 20 4C 4F 4F 50 45 43 49 56 52 45 53"
Mar 18 10:15:50.86: [ 1243]: --> [26:+FCI:      +49 5151185441 ]
Mar 18 10:15:50.86: [ 1243]: REMOTE CSI "+49 5151185441"
Mar 18 10:15:50.86: [ 1243]: --> [20:+FIS:1,5,0,2,1,1,0,2]
Mar 18 10:15:50.86: [ 1243]: --> [2:OK]
Mar 18 10:15:50.86: [ 1243]: REMOTE best rate 14400 bit/s
Mar 18 10:15:50.86: [ 1243]: REMOTE max page width 1728 pixels in 215 mm
Mar 18 10:15:50.86: [ 1243]: REMOTE max unlimited page length
Mar 18 10:15:50.87: [ 1243]: REMOTE best vres 7.7 line/mm
Mar 18 10:15:50.87: [ 1243]: REMOTE best format 2-D MR
Mar 18 10:15:50.87: [ 1243]: REMOTE supports T.30 Annex A, ECM
Mar 18 10:15:50.87: [ 1243]: REMOTE best 10 ms, 5 ms/scanline
Mar 18 10:15:50.87: [ 1243]: USE 14400 bit/s
Mar 18 10:15:50.87: [ 1243]: USE 10 ms, 5 ms/scanline
Mar 18 10:15:50.87: [ 1243]: SEND file "docq/doc292.ps;30"
Mar 18 10:15:50.88: [ 1243]: USE page width 1728 pixels in 215 mm
Mar 18 10:15:50.88: [ 1243]: USE unlimited page length
Mar 18 10:15:50.88: [ 1243]: USE 3.85 line/mm
Mar 18 10:15:50.88: [ 1243]: USE 1-D MR
Mar 18 10:15:50.88: [ 1243]: <-- [23:AT+FIS=0,5,0,2,0,0,0,2\r]
Mar 18 10:15:50.99: [ 1243]: --> [2:OK]
Mar 18 10:15:50.99: [ 1243]: <-- [7:AT+FDT\r]
Mar 18 10:15:58.09: [ 1243]: --> [20:+FCS:0,5,0,2,0,0,0,3]
Mar 18 10:15:58.54: [ 1243]: --> [7:CONNECT]
Mar 18 10:15:58.54: [ 1243]: SEND begin page
Mar 18 10:15:58.55: [ 1243]: <-- data [1028]
Mar 18 10:15:58.55: [ 1243]: <-- data [1025]
Mar 18 10:15:58.55: [ 1243]: <-- data [1029]
Mar 18 10:15:58.55: [ 1243]: <-- data [1029]
Mar 18 10:15:58.82: [ 1243]: <-- data [1027]
Mar 18 10:15:59.09: [ 1243]: <-- data [1029]
Mar 18 10:15:59.36: [ 1243]: <-- data [1025]
Mar 18 10:15:59.62: [ 1243]: <-- data [1026]
Mar 18 10:15:59.89: [ 1243]: <-- data [1033]
Mar 18 10:16:00.16: [ 1243]: <-- data [1025]
Mar 18 10:16:00.43: [ 1243]: <-- data [1028]
Mar 18 10:16:00.70: [ 1243]: <-- data [1024]
Mar 18 10:16:01.85: [ 1243]: <-- data [1025]
Mar 18 10:16:02.12: [ 1243]: <-- data [1026]
Mar 18 10:16:02.39: [ 1243]: <-- data [1024]
Mar 18 10:16:04.46: [ 1243]: <-- data [129]
Mar 18 10:16:04.73: [ 1243]: SENT 15489 bytes of data
Mar 18 10:16:04.73: [ 1243]: SEND 1D RTC
Mar 18 10:16:04.73: [ 1243]: <-- data [9]
Mar 18 10:16:06.32: [ 1243]: SEND end page
Mar 18 10:16:06.33: [ 1243]: SEND send EOP (no more pages or documents)
Mar 18 10:16:06.33: [ 1243]: <-- data [2]
Mar 18 10:16:16.18: [ 1243]: --> [5:ERROR]
Mar 18 10:16:16.18: [ 1243]: SEND recv RTN (retrain negative)
Mar 18 10:16:16.18: [ 1243]: <-- [7:AT+FDT\r]
Mar 18 10:16:23.07: [ 1243]: --> [20:+FCS:0,5,0,2,0,0,0,3]
Mar 18 10:16:23.51: [ 1243]: --> [7:CONNECT]
Mar 18 10:16:23.51: [ 1243]: SEND begin page
Mar 18 10:16:23.51: [ 1243]: <-- data [1028]
Mar 18 10:16:23.52: [ 1243]: <-- data [1025]
Mar 18 10:16:23.52: [ 1243]: <-- data [1029]
Mar 18 10:16:23.52: [ 1243]: <-- data [1029]
Mar 18 10:16:23.79: [ 1243]: <-- data [1027]
Mar 18 10:16:24.05: [ 1243]: <-- data [1029]
Mar 18 10:16:24.32: [ 1243]: <-- data [1025]
Mar 18 10:16:24.59: [ 1243]: <-- data [1026]
Mar 18 10:16:24.86: [ 1243]: <-- data [1033]
Mar 18 10:16:25.13: [ 1243]: <-- data [1025]
Mar 18 10:16:25.40: [ 1243]: <-- data [1028]
Mar 18 10:16:25.66: [ 1243]: <-- data [1024]
Mar 18 10:16:26.84: [ 1243]: <-- data [1025]
Mar 18 10:16:27.11: [ 1243]: <-- data [1026]
Mar 18 10:16:27.38: [ 1243]: <-- data [1024]
Mar 18 10:16:29.42: [ 1243]: <-- data [129]
Mar 18 10:16:29.69: [ 1243]: SENT 15489 bytes of data
Mar 18 10:16:29.69: [ 1243]: SEND 1D RTC
Mar 18 10:16:29.69: [ 1243]: <-- data [9]
Mar 18 10:16:31.29: [ 1243]: SEND end page
Mar 18 10:16:31.29: [ 1243]: SEND send EOP (no more pages or documents)
Mar 18 10:16:31.29: [ 1243]: <-- data [2]
Mar 18 10:16:41.13: [ 1243]: --> [5:ERROR]
Mar 18 10:16:41.13: [ 1243]: SEND recv RTN (retrain negative)
Mar 18 10:16:41.13: [ 1243]: <-- [7:AT+FDT\r]
Mar 18 10:16:48.02: [ 1243]: --> [20:+FCS:0,5,0,2,0,0,0,3]
Mar 18 10:16:48.47: [ 1243]: --> [7:CONNECT]
Mar 18 10:16:48.47: [ 1243]: SEND begin page
Mar 18 10:16:48.47: [ 1243]: <-- data [1028]
Mar 18 10:16:48.48: [ 1243]: <-- data [1025]
Mar 18 10:16:48.48: [ 1243]: <-- data [1029]
Mar 18 10:16:48.48: [ 1243]: <-- data [1029]
Mar 18 10:16:48.75: [ 1243]: <-- data [1027]
Mar 18 10:16:49.01: [ 1243]: <-- data [1029]
Mar 18 10:16:49.28: [ 1243]: <-- data [1025]
Mar 18 10:16:49.55: [ 1243]: <-- data [1026]
Mar 18 10:16:49.82: [ 1243]: <-- data [1033]
Mar 18 10:16:50.09: [ 1243]: <-- data [1025]
Mar 18 10:16:50.36: [ 1243]: <-- data [1028]
Mar 18 10:16:50.63: [ 1243]: <-- data [1024]
Mar 18 10:16:51.78: [ 1243]: <-- data [1025]
Mar 18 10:16:52.05: [ 1243]: <-- data [1026]
Mar 18 10:16:52.32: [ 1243]: <-- data [1024]
Mar 18 10:16:54.39: [ 1243]: <-- data [129]
Mar 18 10:16:54.66: [ 1243]: SENT 15489 bytes of data
Mar 18 10:16:54.66: [ 1243]: SEND 1D RTC
Mar 18 10:16:54.66: [ 1243]: <-- data [9]
Mar 18 10:16:56.25: [ 1243]: SEND end page
Mar 18 10:16:56.25: [ 1243]: SEND send EOP (no more pages or documents)
Mar 18 10:16:56.26: [ 1243]: <-- data [2]
Mar 18 10:17:06.10: [ 1243]: --> [5:ERROR]
Mar 18 10:17:06.10: [ 1243]: SEND recv RTN (retrain negative)
Mar 18 10:17:06.10: [ 1243]: <-- [7:AT+FKS\r]
Mar 18 10:17:07.54: [ 1243]: --> [7:+FHS:02]
Mar 18 10:17:07.54: [ 1243]: REMOTE HANGUP: Call aborted,  from +FK or <CAN>
(code 2)
Mar 18 10:17:07.54: [ 1243]: --> [5:ERROR]
Mar 18 10:17:07.54: [ 1243]: MODEM Command error
Mar 18 10:17:07.54: [ 1243]: <-- [5:ATH0\r]
Mar 18 10:17:07.73: [ 1243]: --> [10:NO CARRIER]
Mar 18 10:17:07.73: [ 1243]: MODEM No carrier
Mar 18 10:17:07.73: [ 1243]: SESSION END


Hope somebody can help with this...

Bye

Wolfgang


-- 
----------------------------------------------------------------------
Wolfgang Baudler
mailto:baudler@gsf.de  Tel.: +49.89.31874463
                       Fax.: +49.89.31874243
Home-Page: http://lulu.gsf.de:8888        
----------------------------------------------------------------------
.. Our continuing mission: To seek out knowledge of C, to explore
strange UNIX commands, and to boldly code where no one has man page 4.