HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: {HELP} I cannot receive correct fax



----------
X-Sun-Data-Type: text
X-Sun-Data-Description: text
X-Sun-Data-Name: text
X-Sun-Charset: us-ascii
X-Sun-Content-Lines: 31


I am so sorry for my carelessness to attach so many times FAQ.

I can't find my server trace. Attached is a session log and
a modem configuration file. 

Thank you for your help.

Qian Guo Yu

> 
> Qian Guo Yu wrote:
>     
>     I've installed Hylafax successfully. When I send fax, no matter it's
>     TIFF image or ASCII text, the receiver only get some of the context.
>     (it looks like half page, and some lines are merged together). 
>     
>     Platform: Pentiem PC
>     OS:       SCO UnixWare 2.1
>     Hylafax:  V4.0pl1
>     Modem:    ZyXEL Elite 2864
>     
>     A tried to find answer from Hylafax FAQ, the question 141 is similar
>     to my question, but to no avail.
>     
>     Any suggestions or comments are really appreciated.
> 
> Please provide a server trace and a session log;
> (BTW: No need to include the text of the FAQ 3 times.)
> 
> 	matthias
----------
X-Sun-Data-Type: default
X-Sun-Data-Name: aaa
X-Sun-Charset: us-ascii
X-Sun-Content-Lines: 52

Mar 13 17:25:46.78: [22634]: SESSION BEGIN 00000035 657744998
Mar 13 17:25:46.79: [22634]: SEND FAX: JOB 39 DEST 7744998 COMMID 00000035
Mar 13 17:25:46.82: [22634]: DELAY 2600 ms
Mar 13 17:25:49.42: [22634]: <-- [39:AT&B1&N0&S0*F0S18=4S38.3=1E0V1Q0S0=0H0\r]
Mar 13 17:25:49.62: [22634]: --> [2:OK]
Mar 13 17:25:49.62: [22634]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
Mar 13 17:25:49.66: [22634]: --> [2:OK]
Mar 13 17:25:49.66: [22634]: <-- [14:AT+FCLASS=2.0\r]
Mar 13 17:25:49.70: [22634]: --> [2:OK]
Mar 13 17:25:49.70: [22634]: <-- [9:AT+FLO=2\r]
Mar 13 17:25:49.74: [22634]: --> [2:OK]
Mar 13 17:25:49.74: [22634]: <-- [9:AT+FPP=0\r]
Mar 13 17:25:49.78: [22634]: --> [2:OK]
Mar 13 17:25:49.78: [22634]: <-- [9:AT+FBO=0\r]
Mar 13 17:25:49.82: [22634]: --> [2:OK]
Mar 13 17:25:49.82: [22634]: <-- [10:AT+FCT=30\r]
Mar 13 17:25:49.86: [22634]: --> [2:OK]
Mar 13 17:25:49.86: [22634]: <-- [15:AT+FNR=1,1,1,1\r]
Mar 13 17:25:49.90: [22634]: --> [2:OK]
Mar 13 17:25:49.90: [22634]: <-- [9:AT+FIE=0\r]
Mar 13 17:25:49.94: [22634]: --> [2:OK]
Mar 13 17:25:49.94: [22634]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Mar 13 17:25:49.98: [22634]: --> [2:OK]
Mar 13 17:25:49.98: [22634]: <-- [5:ATM0\r]
Mar 13 17:25:50.02: [22634]: --> [2:OK]
Mar 13 17:25:50.02: [22634]: Unable to set RT scheduling parameters: Invalid argument
Mar 13 17:25:50.03: [22634]: <-- [14:AT+FCLASS=2.0\r]
Mar 13 17:25:50.16: [22634]: --> [2:OK]
Mar 13 17:25:50.16: [22634]: <-- [9:AT+FLO=2\r]
Mar 13 17:25:50.30: [22634]: --> [2:OK]
Mar 13 17:25:50.30: [22634]: <-- [9:AT+FPP=0\r]
Mar 13 17:25:50.44: [22634]: --> [2:OK]
Mar 13 17:25:50.44: [22634]: <-- [9:AT+FBO=0\r]
Mar 13 17:25:50.58: [22634]: --> [2:OK]
Mar 13 17:25:50.58: [22634]: <-- [10:AT+FCT=30\r]
Mar 13 17:25:50.72: [22634]: --> [2:OK]
Mar 13 17:25:50.72: [22634]: <-- [15:AT+FNR=1,1,1,1\r]
Mar 13 17:25:50.86: [22634]: --> [2:OK]
Mar 13 17:25:50.86: [22634]: <-- [9:AT+FIE=0\r]
Mar 13 17:25:51.00: [22634]: --> [2:OK]
Mar 13 17:25:51.00: [22634]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Mar 13 17:25:51.14: [22634]: --> [2:OK]
Mar 13 17:25:51.14: [22634]: <-- [22:AT+FLI="+65-771-5230"\r]
Mar 13 17:25:51.28: [22634]: --> [2:OK]
Mar 13 17:25:51.33: [22634]: DIAL 7744998
Mar 13 17:25:51.33: [22634]: <-- [13:ATD9T7744998\r]
Mar 13 17:26:00.42: [22634]: --> [4:BUSY]
Mar 13 17:26:00.43: [22634]: SEND FAILED: Busy signal detected
Mar 13 17:26:00.43: [22634]: <-- [5:ATH0\r]
Mar 13 17:26:00.70: [22634]: --> [2:OK]
Mar 13 17:26:00.71: [22634]: SESSION END

----------
X-Sun-Data-Type: default
X-Sun-Data-Name: bbb
X-Sun-Charset: us-ascii
X-Sun-Content-Lines: 72

CountryCode:            65
AreaCode:               "" 
FAXNumber:              +65.771.5230   
LongDistancePrefix:     ""
InternationalPrefix:    001
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0666
LogFileMode:            0666
DeviceMode:             0666
RingsBeforeAnswer:      1
SpeakerVolume:          off
#GettyArgs:             "-h %l dx_%s"
LocalIdentifier:        +65-771-5230  
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l(ISS FaxServer)|%c|Page %%p of %%t"
#QualifyTSI:            etc/tsi
MaxRecvPages:           100
JobReqBusy:             180
JobReqDataConn:         60
JobReqNoAnswer:         60
JobReqNoCarrier:        60
JobReqNoFCon:           60
JobReqOther:            60
MaxConcurrentJobs:      2
NoCarrierRetrys:        2
NotifyCmd:              bin/notify
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2.0        # use class 2.0 interface
ModemRate:              38400           # 38.4 works fine
ModemFlowControl:       rtscts          # default
#
ModemNoFlowCmd:         AT&H0           # disable flow control
ModemHardFlowCmd:       AT&H3           # hardware flow control
ModemSoftFlowCmd:       AT&H4           # software flow control
ModemSetupDTRCmd:       AT&D2           # DTR off causes modem to hang up
ModemSetupDCDCmd:       AT&C1           # DCD tracks carrier
#
ModemSetupAACmd:        AT+FAA=1        # enable in current class
#
# Additional reset commands:
#
# &B1     DTE-DCE rate is fixed at DTE setting
# &N0     Auto-negotiate highest possible DCE-DCE link rate
# &S0     DSR always on
# *F0     Deny remote configuration
# S18=4   Receive at 38400
# S38.3=1 DCD on/off sequence follows UNIX standard; also
#         fix receiving baud rate at S18 value
# 
ModemResetCmds:         AT&B1&N0&S0*F0S18=4S38.3=1
#
# NB: If you need to prefix phone numbers to get through a PBX,
#     put it in the ModemDialCmd; e.g. "DT9%s@".
ModemDialCmd:           ATD9T%s         # no '@' 'cuz then busy not recognized
NoCarrierRetrys:        3               # retry 3 times on no carrier
#
ModemSetVolumeCmd:      "ATM0 ATM1L1 ATM1L3 ATM1L5 ATM1L7"
#
# Caller ID configuration setup.
#
#QualifyCID:            etc/cid         # CID access control list file
#CIDNumber:             "CALLER NUMBER: " # pattern string for phone number info
#CIDName:            "CALLER NAME: "  # pattern string for identity info
#
# PagerSetupCmds:               AT&K0&N15       # use V.22 at 1200 bps (PageNet)




Project hosted by iFAX Solutions