USR Sportster troubles?

[Alex Brown <abrown@msg.com>]

Hello -

After testing the HylaFAX installation packaged with my BSDI system,
with an internal USR Sportster V.34+ FAX, and failing modem
initialization completely, I noticed that v3.0 beta111 added some
workarounds to USR bugs, and decided to update the software.  However,
after installing v4.0pl1 (and configuring the modem with all defaults)
I still have problems.  The modem now does initialize, dial, and even
connect, but the session ends with "Unspecified Transmit Phase B
error", with what looks like garbled data from the remote in the log.
Any suggestions would be greatly appreciated.  (RSVP directly; I'm not
on this list.)

Alex Brown <abrown@msg.com>

Feb 19 11:06:55.07: [ 4923]: SESSION BEGIN
Feb 19 11:06:55.08: [ 4923]: DELAY 2600 ms
Feb 19 11:06:57.68: [ 4923]: <-- [16:ATE0V1Q0X4S0=0H0]
Feb 19 11:06:57.91: [ 4923]: --> [2:OK]
Feb 19 11:06:57.91: [ 4923]: <-- [31:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1]
Feb 19 11:06:58.14: [ 4923]: --> [2:OK]
Feb 19 11:06:58.16: [ 4923]: <-- [13:AT+FCLASS=2.0]
Feb 19 11:06:58.39: [ 4923]: --> [2:OK]
Feb 19 11:06:58.39: [ 4923]: <-- [8:AT+FLO=2]
Feb 19 11:06:58.62: [ 4923]: --> [2:OK]
Feb 19 11:06:58.62: [ 4923]: <-- [8:AT+FPP=0]
Feb 19 11:06:58.85: [ 4923]: --> [2:OK]
Feb 19 11:06:58.85: [ 4923]: <-- [8:AT+FBO=0]
Feb 19 11:06:59.08: [ 4923]: --> [2:OK]
Feb 19 11:06:59.08: [ 4923]: <-- [9:AT+FCT=30]
Feb 19 11:06:59.31: [ 4923]: --> [2:OK]
Feb 19 11:06:59.31: [ 4923]: <-- [14:AT+FNR=1,1,1,1]
Feb 19 11:06:59.54: [ 4923]: --> [2:OK]
Feb 19 11:06:59.54: [ 4923]: <-- [8:AT+FIE=0]
Feb 19 11:06:59.77: [ 4923]: --> [2:OK]
Feb 19 11:06:59.77: [ 4923]: <-- [22:AT+FCC=1,5,2,2,0,0,0,0]
Feb 19 11:07:00.00: [ 4923]: --> [2:OK]
Feb 19 11:07:00.00: [ 4923]: <-- [4:ATM1]
Feb 19 11:07:00.22: [ 4923]: --> [2:OK]
Feb 19 11:07:00.26: [ 4923]: <-- [13:AT+FCLASS=2.0]
Feb 19 11:07:00.49: [ 4923]: --> [2:OK]
Feb 19 11:07:00.49: [ 4923]: <-- [8:AT+FLO=2]
Feb 19 11:07:00.72: [ 4923]: --> [2:OK]
Feb 19 11:07:00.72: [ 4923]: <-- [8:AT+FPP=0]
Feb 19 11:07:00.95: [ 4923]: --> [2:OK]
Feb 19 11:07:00.95: [ 4923]: <-- [8:AT+FBO=0]
Feb 19 11:07:01.18: [ 4923]: --> [2:OK]
Feb 19 11:07:01.18: [ 4923]: <-- [9:AT+FCT=30]
Feb 19 11:07:01.41: [ 4923]: --> [2:OK]
Feb 19 11:07:01.41: [ 4923]: <-- [14:AT+FNR=1,1,1,1]
Feb 19 11:07:01.64: [ 4923]: --> [2:OK]
Feb 19 11:07:01.64: [ 4923]: <-- [8:AT+FIE=0]
Feb 19 11:07:01.87: [ 4923]: --> [2:OK]
Feb 19 11:07:01.87: [ 4923]: <-- [22:AT+FCC=1,5,2,2,0,0,0,0]
Feb 19 11:07:02.10: [ 4923]: --> [2:OK]
Feb 19 11:07:02.10: [ 4923]: <-- [29:AT+FLI="Marathon Systems Gro"]
Feb 19 11:07:02.33: [ 4923]: --> [2:OK]
Feb 19 11:07:02.33: [ 4923]: DIAL 4356161
Feb 19 11:07:02.33: [ 4923]: <-- [11:ATDT4356161]
Feb 19 11:07:18.95: [ 4923]: --> [4:+FCO]
Feb 19 11:07:21.54: [ 4923]: --> [20:+FNF:+FCI:"        ]
Feb 19 11:07:21.54: [ 4923]: REMOTE NSF "+FCI:""
Feb 19 11:07:21.54: [ 4923]: --> [32:15084356161"+FIS:1,3,0,2,1,0,0,]
Feb 19 11:07:21.54: [ 4923]: --> [47:���Q,�b�}������ң����.�K;A9�L ��������Z@]
Feb 19 11:07:21.81: [ 4923]: --> [40:��r�,@������u������@������A�ʀ]
Feb 19 11:07:22.39: [ 4923]: --> [47:*t�����f�z�
 @������!qr�	 �����۹��jx��]
Feb 19 11:07:22.39: [ 4923]: --> [2:OK]
Feb 19 11:07:22.39: [ 4923]: REMOTE HANGUP: Unspecified Transmit Phase B error (code 20)
Feb 19 11:07:22.39: [ 4923]: SEND FAILED: Unspecified Transmit Phase B error
Feb 19 11:07:22.39: [ 4923]: <-- [4:ATH0]
Feb 19 11:07:22.62: [ 4923]: --> [2:OK]
Feb 19 11:07:22.64: [ 4923]: SESSION END