HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: IXO/TAP Problem



Mario de Mello Bittencourt Neto wrote:
    
    Hi, I have changed de SessionTracing to 0x100f and tried to use sendpage.
    The session log is here. I could not find what is the "misconfiguration"
    parameter.
    I read the log(5F) and I keep sending a character (maybe a return) <--
    <1:\015> and got no valid response...
    
    Thanks, Mario.
    
        No initial ID response from paging central; too many attempts to send
    
        ---- Transcript of session follows ----
    
    Feb 10 16:09:35.27: [29946]: SESSION BEGIN 00000892 55926223315
    Feb 10 16:09:35.38: [29946]: SEND PAGE: JOB 437 DEST 6223315 COMMID 00000892
    Feb 10 16:09:35.38: [29946]: MODEM set DTR OFF
    Feb 10 16:09:35.38: [29946]: DELAY 2600 ms
    Feb 10 16:09:37.99: [29946]: MODEM set DTR ON
    Feb 10 16:09:37.99: [29946]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS
    Feb 10 16:09:37.99: [29946]: MODEM flush i/o
    Feb 10 16:09:37.99: [29946]: <-- [17:ATE0V1Q0X4S0=0H0\r]
    Feb 10 16:09:38.17: [29946]: --> [16:ATE0V1Q0X4S0=0H0]

just a BTW question: why is your modem in ECHO mode here?

    Feb 10 16:09:38.17: [29946]: --> [2:OK]
    Feb 10 16:09:38.17: [29946]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
    Feb 10 16:09:38.35: [29946]: --> [2:OK]
    Feb 10 16:09:38.35: [29946]: <-- [5:ATM1\r]
    Feb 10 16:09:38.52: [29946]: --> [2:OK]
    Feb 10 16:09:38.52: [29946]: MODEM set parity: 8 bits, no parity
    Feb 10 16:09:38.52: [29946]: MODEM input buffering enabled
    Feb 10 16:09:38.52: [29946]: <-- [12:AT+FCLASS=0\r]
    Feb 10 16:09:38.68: [29946]: --> [2:OK]
    Feb 10 16:09:38.68: [29946]: <-- [15:AT&A0&K0&M0&N2\r]

I don't know your modem type (and I've no modem w/ &A0); please
look into your modem manual and check if one of the AT-commands
at :38.17 and :38.68 (or the defaults from profile or commands before)
puts your modem in a "set DTE speed to DCE speed" mode, e.g.
switch the DTE-speed to 1200 after CARRIER is on; the DTE is locked
and should be at 38400;

	matthias

    Feb 10 16:09:38.95: [29946]: --> [2:OK]
    Feb 10 16:09:38.95: [29946]: DIAL 6223315
    Feb 10 16:09:38.95: [29946]: <-- [12:ATDT6223315\r]
    Feb 10 16:09:57.22: [29946]: --> [12:CONNECT 1200]
    Feb 10 16:09:57.22: [29946]: EXPECT ID (paging central identification)
    Feb 10 16:09:57.22: [29946]: <-- <1:\015>
    Feb 10 16:10:00.22: [29946]: MODEM TIMEOUT: reading line from modem
    Feb 10 16:10:00.22: [29946]: --> <9:\000\000\000\000\000\000\000\000\000>
    Feb 10 16:10:00.22: [29946]: RECVunknown paging central response: 
    Feb 10 16:10:00.22: [29946]: <-- <1:\015>
    Feb 10 16:10:03.22: [29946]: MODEM TIMEOUT: reading line from modem
    Feb 10 16:10:03.22: [29946]: --> <9:\000\000\000\000\000\000\000\000\000>
    Feb 10 16:10:03.22: [29946]: RECVunknown paging central response: 
    Feb 10 16:10:03.22: [29946]: <-- <1:\015>
    Feb 10 16:10:06.22: [29946]: MODEM TIMEOUT: reading line from modem
    Feb 10 16:10:06.22: [29946]: --> <9:\000\000\000\000\000\000\000\000\000>
    Feb 10 16:10:06.22: [29946]: RECVunknown paging central response: 
    Feb 10 16:10:06.22: [29946]: <-- <1:\015>
    Feb 10 16:10:09.22: [29946]: MODEM TIMEOUT: reading line from modem
    Feb 10 16:10:09.22: [29946]: --> <9:\000\000\000\000\000\000\000\000\000>
    Feb 10 16:10:09.22: [29946]: RECVunknown paging central response: 
    Feb 10 16:10:09.22: [29946]: PAGE FAILED: No initial ID response from paging central
    Feb 10 16:10:09.22: [29946]: PAGE FAILED: No initial ID response from paging central; too many attempts to send
    Feb 10 16:10:09.22: [29946]: <-- [5:ATH0\r]
    Feb 10 16:10:14.22: [29946]: MODEM TIMEOUT: reading line from modem
    Feb 10 16:10:14.22: [29946]: MODEM <Timeout>
    Feb 10 16:10:14.22: [29946]: MODEM input buffering enabled
    Feb 10 16:10:14.22: [29946]: MODEM set DTR OFF
    Feb 10 16:10:14.22: [29946]: SESSION END
    
        ---- Fax nao enviado ----
    
          Destinatario: 6223315
                 JobID: 437
               GroupID: 437
             Remetente: Mario de Mello Bittencourt Neto
                E-mail: mneto@zeus.buriti.com.br
                CommID: 00000892
    Submetido a partir: localhost
                Status: No initial ID response from paging central; too many attempts to send
               Dialogs: 3 (exchanges with remote device)
            Tentativas: 0 (ligacoes consecutivas falhas ao destinatario)
              Ligacoes: 3 (total de ligacoes efetuadas)
    
        ---- Pagers submetidos a transmissao e nao enviados ----
    
            ... stuff deleted ....




Project hosted by iFAX Solutions