Trying to dialout on a USRobotics Sportster 28.8 Fax/Modem

[jackb@pgw.picker.com]

I finally gave up trying to get the USRobotics Sportster 33.6 Fax/Modem.
Now I installed a USRobotics Sportster 28.8 Fax/Modem to the tty00 port
on my Dec Alpha running DU 3.d.  I can hear the modem dial out and can
hear the Fax machine I'm calling pick up, but shortly after exchanging
signals the Fax machine hangs up with REMOTE HANGUP: RSPREC error/got DCN
 (code 71).  This is consistent.

Can anyone help me get by this?

Thanks,

Jack

Related info follows:

faxstat
HylaFAX scheduler on pgw6: Running
Modem tty00 (+1.704.588.4000): Running and idle

HylaFAX scheduler on pgw6: Running
Modem tty00 (+1.704.588.4000): Sending job 1


The logfile shows the remote Fax hanging up on me.
Jan 31 11:44:37.08: [ 2032]: SESSION BEGIN 00000004 17045884595
Jan 31 11:44:37.08: [ 2032]: SEND FAX: JOB 1 DEST 5884595 COMMID 00000004
Jan 31 11:44:37.08: [ 2032]: DELAY 2600 ms
Jan 31 11:44:39.68: [ 2032]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Jan 31 11:44:39.85: [ 2032]: --> [16:ATE0V1Q0X4S0=0H0]
Jan 31 11:44:39.85: [ 2032]: --> [2:OK]
Jan 31 11:44:39.85: [ 2032]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
Jan 31 11:44:40.02: [ 2032]: --> [2:OK]
Jan 31 11:44:40.02: [ 2032]: <-- [14:AT+FCLASS=2.0\r]
Jan 31 11:44:40.06: [ 2032]: --> [2:OK]
Jan 31 11:44:40.06: [ 2032]: <-- [9:AT+FLO=2\r]
Jan 31 11:44:40.10: [ 2032]: --> [2:OK]
Jan 31 11:44:40.10: [ 2032]: <-- [9:AT+FPP=0\r]
Jan 31 11:44:40.14: [ 2032]: --> [2:OK]
Jan 31 11:44:40.14: [ 2032]: <-- [9:AT+FBO=0\r]
Jan 31 11:44:40.18: [ 2032]: --> [2:OK]
Jan 31 11:44:40.18: [ 2032]: <-- [10:AT+FCT=30\r]
Jan 31 11:44:40.22: [ 2032]: --> [2:OK]
Jan 31 11:44:40.22: [ 2032]: <-- [15:AT+FNR=1,1,1,1\r]
Jan 31 11:44:40.26: [ 2032]: --> [2:OK]
Jan 31 11:44:40.26: [ 2032]: <-- [9:AT+FIE=0\r]
Jan 31 11:44:40.30: [ 2032]: --> [2:OK]
Jan 31 11:44:40.30: [ 2032]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Jan 31 11:44:40.34: [ 2032]: --> [2:OK]
Jan 31 11:44:40.34: [ 2032]: <-- [5:ATM1\r]
Jan 31 11:44:40.50: [ 2032]: --> [2:OK]
Jan 31 11:44:40.52: [ 2032]: <-- [14:AT+FCLASS=2.0\r]
Jan 31 11:44:40.66: [ 2032]: --> [2:OK]
Jan 31 11:44:40.66: [ 2032]: <-- [9:AT+FLO=2\r]
Jan 31 11:44:40.79: [ 2032]: --> [2:OK]
Jan 31 11:44:40.79: [ 2032]: <-- [9:AT+FPP=0\r]
Jan 31 11:44:40.93: [ 2032]: --> [2:OK]
Jan 31 11:44:40.93: [ 2032]: <-- [9:AT+FBO=0\r]
Jan 31 11:44:41.06: [ 2032]: --> [2:OK]
Jan 31 11:44:41.06: [ 2032]: <-- [10:AT+FCT=30\r]
Jan 31 11:44:41.20: [ 2032]: --> [2:OK]
Jan 31 11:44:41.20: [ 2032]: <-- [15:AT+FNR=1,1,1,1\r]
Jan 31 11:44:41.34: [ 2032]: --> [2:OK]
Jan 31 11:44:41.34: [ 2032]: <-- [9:AT+FIE=0\r]
Jan 31 11:44:41.47: [ 2032]: --> [2:OK]
Jan 31 11:44:41.47: [ 2032]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Jan 31 11:44:41.61: [ 2032]: --> [2:OK]
Jan 31 11:44:41.61: [ 2032]: <-- [22:AT+FLI="NothingSetup"\r]
Jan 31 11:44:41.75: [ 2032]: --> [2:OK]
Jan 31 11:44:41.76: [ 2032]: DIAL 5884595
Jan 31 11:44:41.76: [ 2032]: <-- [12:ATDT5884595\r]
Jan 31 11:44:52.56: [ 2032]: --> [4:+FCO]
Jan 31 11:44:54.56: [ 2032]: --> [67:+FNF:0000091A086D7045884595FFFFFFFFFFFFFF01
19020A100182013000000069]
Jan 31 11:44:54.56: [ 2032]: REMOTE NSF "0000091A086D7045884595FFFFFFFFFFFFFF011
9020A100182013000000069"
Jan 31 11:44:55.28: [ 2032]: --> [27:+FCI:"        704 588 4595"]
Jan 31 11:44:55.28: [ 2032]: REMOTE CSI "704 588 4595"
Jan 31 11:44:55.72: [ 2032]: --> [20:+FIS:1,5,0,2,1,0,0,1]
Jan 31 11:44:55.72: [ 2032]: --> [2:OK]
Jan 31 11:44:55.72: [ 2032]: REMOTE best rate 14400 bit/s
Jan 31 11:44:55.72: [ 2032]: REMOTE max page width 1728 pixels in 215 mm
Jan 31 11:44:55.72: [ 2032]: REMOTE max unlimited page length 
Jan 31 11:44:55.72: [ 2032]: REMOTE best vres 7.7 line/mm
Jan 31 11:44:55.72: [ 2032]: REMOTE best format 2-D MR
Jan 31 11:44:55.72: [ 2032]: REMOTE best 5 ms/scanline
Jan 31 11:44:55.72: [ 2032]: USE 14400 bit/s
Jan 31 11:44:55.72: [ 2032]: USE 5 ms/scanline
Jan 31 11:44:55.72: [ 2032]: SEND file "docq/doc1.cover;30"
Jan 31 11:44:55.72: [ 2032]: USE page width 1728 pixels in 215 mm
Jan 31 11:44:55.72: [ 2032]: USE unlimited page length 
Jan 31 11:44:55.72: [ 2032]: USE 3.85 line/mm
Jan 31 11:44:55.72: [ 2032]: USE 1-D MR
Jan 31 11:44:55.72: [ 2032]: <-- [23:AT+FIS=0,5,0,2,0,0,0,1\r]
Jan 31 11:44:55.87: [ 2032]: --> [2:OK]
Jan 31 11:44:55.87: [ 2032]: <-- [7:AT+FDT\r]
Jan 31 11:44:56.01: [ 2032]: --> [20:+FCS:0,5,0,2,0,0,0,1]
Jan 31 11:45:10.35: [ 2032]: --> [7:+FHS:71]
Jan 31 11:45:10.35: [ 2032]: REMOTE HANGUP: RSPREC error/got DCN (code 71)
Jan 31 11:45:10.35: [ 2032]: --> [2:OK]