[hylafax-devel] Re: Endless RTN -- seems to be fixed now!

[Dmitry Bely <dbely@mail.ru>]

"Bernd Proissl" <news@proissl.de> writes:

> > Well, the attached patches seems to fix that. They are still experimental
> > and possibly incomplete, but they work for me (tested with Zyxel 1496E in
> > Class 2.0 mode).  A Panasonic BX780 fax machine, connected to the server
> > via PBX, i.e. directly, now successfully generates MCF (always responded
> > with RTN before). Could you, folks, check if they work for you also.
> Dmitry,
> 
> i applied your patches to a freshly compiled v4.1beta2 (for suse 6.3 running
> on 6.2)
> unfortunately they do not improve my situation.
> I tested with a zyxel 1496, V6.21 (newest version i found on the web server)

BTW, which fax machine was on the other side?

> i attached to config file and the log of the (last) test.
> May i ask you to have a look at it? Thanks!

[---cut---]
Mar 11 23:10:36.81: [10138]: REMOTE best rate 9600 bit/s
Mar 11 23:10:36.81: [10138]: REMOTE max page width 1728 pixels in 215 mm
Mar 11 23:10:36.81: [10138]: REMOTE max unlimited page length
Mar 11 23:10:36.81: [10138]: REMOTE best vres 7.7 line/mm
Mar 11 23:10:36.81: [10138]: REMOTE best format 2-D MR
Mar 11 23:10:36.81: [10138]: REMOTE supports T.30 Annex A, ECM
Mar 11 23:10:36.81: [10138]: REMOTE best 20 ms/scanline
Mar 11 23:10:36.81: [10138]: USE 9600 bit/s
Mar 11 23:10:36.81: [10138]: USE 20 ms/scanline
Mar 11 23:10:36.81: [10138]: SEND file "docq/doc115.ps;40"
[---cut---]

Could you mail me this file (rasterized TIFF, which Hylafax is trying to
send) as an attachment? I'd like to look on its structure.

Could you also
1. Try 1D-encoding (etc/config:     use2d:  no)
2. Revert faxd/G3Encoder.c++ to its original state (two other diffs should be
applied) -- maybe I fixed there an unexisted bug. Don't forget to remove
G3Encoder.o (or make clean) otherwise it won't be recompiled.

Don't give up! Surely we will eliminate this nasty bug together :-)

> Bernd
> 
> btw: in you patchfiles i had to change '\' to '/' to get them work.
> I do not know where '\' comes from.

That's my fault. The diffs were made on Windows machine :-)

Hope to hear from you soon,
Dmitry



____________________ HylaFAX(tm) Developers Mailing List ____________________
 To unsub: mail -s unsubscribe hylafax-devel-request@hylafax.org < /dev/null