HylaFAX Difference between revisions of "FreeBSD Start Guide"
(Update references to ghostscipt8 -> ghostscript9 & Add 'Notes' section) |
(→Configuration) |
||
| Line 23: | Line 23: | ||
( serial port : COM1=cuau0, COM2=cuau1 ) | ( serial port : COM1=cuau0, COM2=cuau1 ) | ||
/usr/local/sbin/faxaddmodem | /usr/local/sbin/faxaddmodem | ||
| + | |||
| + | *connecting whit Modem port | ||
| + | /etc/ttys | ||
| + | adding line: | ||
| + | cuau0 "/usr/local/sbin/faxgetty /dev/cuau0" dialup on | ||
==Autorun== | ==Autorun== | ||
Latest revision as of 09:27, 4 January 2016
FreeBSD Hylafax Quick Install
We need to install following ports:
- print/ghostscript9-nox11
- shells/bash
- comms/hylafax
cd /usr/ports/print/ghostscript9-nox11 make install clean cd /usr/ports/shells/bash make install clean cd /usr/ports/comms/hylafax make install clean
Configuration
- run hylafax setup:
/usr/local/sbin/faxsetup
- run modem setup for each modem
( serial port : COM1=cuau0, COM2=cuau1 )
/usr/local/sbin/faxaddmodem
- connecting whit Modem port
/etc/ttys adding line: cuau0 "/usr/local/sbin/faxgetty /dev/cuau0" dialup on
Autorun
to make sure the hylafax start with system edit /etc/rc.conf and add:
hylafax_enable="YES"
Information
- config directory : /var/spool/hylafax/etc
- configuration file for cuau0 modem : config.cuau0
Notes
FreeBSD 8.0 [amd64, i386] The uart(4) driver is now the default driver for serial port devices in favor of the sio(4) driver. Note that the device nodes have been renamed from /dev/cuadN and /dev/ttydN to /dev/cuauN and /dev/ttyuN.
