Spam

hi i have a elastix 2.4 and as u know hylafax 4.3.10 with gateway and e1 line problem is fax send and receive correctly in lan but to ouside and incoming from otside we have problems. as i read last discusion i got poor qulaity of audio is cause of this. but hardware fax device now working with our line.my question is how can i abondoned the restricted this manner for recieving faxes. this my log

ec 03 13:31:23.63: [26211]: HylaFAX (tm) Version 4.3.10 Dec 03 13:31:23.63: [26211]: SEND FAX: JOB 21 DEST XXXXXXX COMMID 000000106 DEVICE '/dev/ttyIAX1' FROM 'Asterisk VoIP PBX <asterisk@localhost>' USER asterisk Dec 03 13:31:23.63: [26211]: STATE CHANGE: RUNNING -> SENDING Dec 03 13:31:23.63: [26211]: <-- [12:AT+FCLASS=1\r] Dec 03 13:31:23.63: [26211]: --> [2:OK] Dec 03 13:31:23.63: [26211]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled Dec 03 13:31:23.63: [26211]: DIAL XXXXXXXXX Dec 03 13:31:23.63: [26211]: <-- [13:ATDT XXXXXXX\r] Dec 03 13:31:37.05: [26211]: --> [7:CONNECT] Dec 03 13:31:39.53: [26211]: --> [20:9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7] Dec 03 13:31:39.53: [26211]: --> [20:79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E] Dec 03 13:31:39.53: [26211]: --> [20:E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79] Dec 03 13:31:39.53: [26211]: --> [20:9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7] Dec 03 13:31:39.53: [26211]: --> [14:79 9E E7 79 9E E7 79 9E E7 79 9E F7 10 03] Dec 03 13:31:39.53: [26211]: --> [5:ERROR] Dec 03 13:31:39.53: [26211]: MODEM Command error Dec 03 13:31:39.53: [26211]: FCS error Dec 03 13:31:39.53: [26211]: <-- [9:AT+FRS=7\r] Dec 03 13:31:39.67: [26211]: --> [2:OK] Dec 03 13:31:39.67: [26211]: <-- [9:AT+FTH=3\r] Dec 03 13:31:39.69: [26211]: --> [7:CONNECT] Dec 03 13:31:39.69: [26211]: <-- HDLC<3:FF C8 D8> Dec 03 13:31:39.69: [26211]: <-- data [3] Dec 03 13:31:39.69: [26211]: <-- data [2] Dec 03 13:31:40.78: [26211]: --> [2:OK] Dec 03 13:31:40.78: [26211]: SEND send CRP (command repeat) Dec 03 13:31:40.78: [26211]: <-- [9:AT+FRH=3\r] Dec 03 13:31:43.49: [26211]: --> [7:CONNECT] Dec 03 13:31:45.56: [26211]: --> HDLC<42:FF C0 04 00 00 70 00 00 00 69 FF 80 E0 00 08 00 40 A9 13 18 80 92 40 0A B4 4A B4 F2 04 04 04 04 04 04 04 04 04 04 04 C0 D7 2A> Dec 03 13:31:45.56: [26211]: --> [2:OK] Dec 03 13:31:45.56: [26211]: REMOTE NSF "00 00 0E 00 00 00 96 FF 01 07 00 10 00 02 95 C8 18 01 49 02 50 2D 52 2D 4F 20 20 20 20 20 20 20 20 20 20 20 03" Dec 03 13:31:45.56: [26211]: NSF remote fax equipment: Panasonic Dec 03 13:31:45.56: [26211]: NSF remote station ID: "P-R-O " Dec 03 13:31:45.56: [26211]: <-- [9:AT+FRH=3\r] Dec 03 13:31:45.96: [26211]: --> [7:CONNECT] Dec 03 13:31:45.96: [26211]: --> HDLC<12:FF C8 01 04 77 11 E2 30 18 88 9C 77> Dec 03 13:31:45.96: [26211]: --> [5:ERROR] Dec 03 13:31:45.96: [26211]: MODEM Command error Dec 03 13:31:45.96: [26211]: FCS error Dec 03 13:31:45.96: [26211]: <-- [9:AT+FRS=7\r] Dec 03 13:31:46.13: [26211]: --> [2:OK] Dec 03 13:31:46.13: [26211]: <-- [9:AT+FTH=3\r] Dec 03 13:31:46.15: [26211]: --> [7:CONNECT] Dec 03 13:31:46.15: [26211]: <-- HDLC<3:FF C8 D8> Dec 03 13:31:46.15: [26211]: <-- data [3] Dec 03 13:31:46.15: [26211]: <-- data [2] Dec 03 13:31:47.25: [26211]: --> [2:OK] Dec 03 13:31:47.25: [26211]: SEND send CRP (command repeat) Dec 03 13:31:47.25: [26211]: <-- [9:AT+FRH=3\r] Dec 03 13:31:47.89: [26211]: --> [7:CONNECT] Dec 03 13:31:49.95: [26211]: --> HDLC<42:FF C0 04 00 00 70 00 00 00 69 FF 80 E0 00 08 00 40 A9 13 18 80 92 40 0A B4 4A B4 F2 04 04 04 04 04 04 04 04 04 04 04 C0 D7 2A> Dec 03 13:31:49.95: [26211]: --> [2:OK] Dec 03 13:31:49.95: [26211]: REMOTE NSF "00 00 0E 00 00 00 96 FF 01 07 00 10 00 02 95 C8 18 01 49 02 50 2D 52 2D 4F 20 20 20 20 20 20 20 20 20 20 20 03" Dec 03 13:31:49.95: [26211]: NSF remote fax equipment: Panasonic Dec 03 13:31:49.95: [26211]: NSF remote station ID: "P-R-O " Dec 03 13:31:49.95: [26211]: <-- [9:AT+FRH=3\r] Dec 03 13:31:50.34: [26211]: --> [7:CONNECT] Dec 03 13:31:50.34: [26211]: --> HDLC<11:FF C8 01 04 77 1F 23 01 88 89 C7> Dec 03 13:31:50.46: [26211]: --> [2:OK] Dec 03 13:31:50.46: [26211]: REMOTE best rate 33600 bit/s Dec 03 13:31:50.46: [26211]: REMOTE max A4 page width (215 mm) Dec 03 13:31:50.46: [26211]: REMOTE max unlimited page length Dec 03 13:31:50.46: [26211]: REMOTE best vres 15.4 line/mm Dec 03 13:31:50.46: [26211]: REMOTE format support: MH, MR, MMR Dec 03 13:31:50.46: [26211]: REMOTE supports T.30 Annex A, 256-byte ECM Dec 03 13:31:50.46: [26211]: REMOTE best 0 ms/scanline Dec 03 13:31:50.46: [26211]: USE 14400 bit/s Dec 03 13:31:50.46: [26211]: USE error correction mode Dec 03 13:31:50.46: [26211]: SEND file "docq/doc21.pdf;c1" Dec 03 13:31:50.46: [26211]: USE A4 page width (215 mm) Dec 03 13:31:50.46: [26211]: USE unlimited page length Dec 03 13:31:50.46: [26211]: USE 7.7 line/mm Dec 03 13:31:50.46: [26211]: USE 2-D MMR Dec 03 13:31:50.46: [26211]: USE 0 ms/scanline Dec 03 13:31:50.46: [26211]: SEND training at v.17 14400 bit/s Dec 03 13:31:50.46: [26211]: <-- [9:AT+FRS=7\r] Dec 03 13:31:50.52: [26211]: --> [2:OK] Dec 03 13:31:50.52: [26211]: <-- [9:AT+FTH=3\r] Dec 03 13:31:50.54: [26211]: --> [7:CONNECT] Dec 03 13:31:50.54: [26211]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04> Dec 03 13:31:50.54: [26211]: <-- data [23] Dec 03 13:31:50.54: [26211]: <-- data [2] Dec 03 13:31:52.11: [26211]: --> [7:CONNECT] Dec 03 13:31:52.11: [26211]: <-- HDLC<7:FF C8 C1 00 46 1F 22> Dec 03 13:31:52.11: [26211]: <-- data [7] Dec 03 13:31:52.11: [26211]: <-- data [2] Dec 03 13:31:52.52: [26211]: --> [2:OK] Dec 03 13:31:52.52: [26211]: <-- [9:AT+FTS=7\r] Dec 03 13:31:52.62: [26211]: --> [2:OK] Dec 03 13:31:52.62: [26211]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled Dec 03 13:31:52.62: [26211]: <-- [11:AT+FTM=145\r] Dec 03 13:31:52.64: [26211]: --> [7:CONNECT] Dec 03 13:31:52.64: [26211]: DELAY 400 ms Dec 03 13:31:53.04: [26211]: <-- data [1024] Dec 03 13:31:53.04: [26211]: <-- data [1024] Dec 03 13:31:53.04: [26211]: <-- data [652] Dec 03 13:31:53.04: [26211]: <-- data [2] Dec 03 13:31:55.66: [26211]: --> [2:OK] Dec 03 13:31:55.66: [26211]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Dec 03 13:31:55.66: [26211]: <-- [9:AT+FRH=3\r] Dec 03 13:31:58.76: [26211]: --> [0:] Dec 03 13:31:58.76: [26211]: MODEM <Empty line> Dec 03 13:31:58.76: [26211]: MODEM TIMEOUT: waiting for v.21 carrier Dec 03 13:31:58.76: [26211]: <-- data [1] Dec 03 13:31:58.76: [26211]: --> [2:OK] Dec 03 13:31:58.76: [26211]: DELAY 1500 ms Dec 03 13:32:00.26: [26211]: SEND training at v.17 12000 bit/s Dec 03 13:32:00.26: [26211]: <-- [9:AT+FRS=7\r] Dec 03 13:32:00.32: [26211]: --> [2:OK] Dec 03 13:32:00.32: [26211]: <-- [9:AT+FTH=3\r] Dec 03 13:32:00.35: [26211]: --> [7:CONNECT] Dec 03 13:32:00.35: [26211]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04> Dec 03 13:32:00.35: [26211]: <-- data [23] Dec 03 13:32:00.35: [26211]: <-- data [2] Dec 03 13:32:01.93: [26211]: --> [7:CONNECT] Dec 03 13:32:01.93: [26211]: <-- HDLC<7:FF C8 C1 00 56 1F 22> Dec 03 13:32:01.93: [26211]: <-- data [7] Dec 03 13:32:01.93: [26211]: <-- data [2] Dec 03 13:32:02.34: [26211]: --> [2:OK] Dec 03 13:32:02.34: [26211]: <-- [9:AT+FTS=7\r] Dec 03 13:32:02.45: [26211]: --> [2:OK] Dec 03 13:32:02.45: [26211]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled Dec 03 13:32:02.45: [26211]: <-- [11:AT+FTM=121\r] Dec 03 13:32:02.47: [26211]: --> [7:CONNECT] Dec 03 13:32:02.47: [26211]: DELAY 400 ms Dec 03 13:32:02.87: [26211]: <-- data [1024] Dec 03 13:32:02.87: [26211]: <-- data [1024] Dec 03 13:32:02.87: [26211]: <-- data [202] Dec 03 13:32:02.87: [26211]: <-- data [2] Dec 03 13:32:05.51: [26211]: --> [2:OK] Dec 03 13:32:05.51: [26211]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Dec 03 13:32:05.51: [26211]: <-- [9:AT+FRH=3\r] Dec 03 13:32:06.21: [26211]: --> [7:CONNECT] Dec 03 13:32:08.29: [26211]: --> HDLC<42:FF C0 04 00 00 70 00 00 00 69 FF 80 E0 00 08 00 40 A9 13 18 80 92 40 0A B4 4A B4 F2 04 04 04 04 04 04 04 04 04 04 04 C0 D7 2A> Dec 03 13:32:08.29: [26211]: --> [2:OK] Dec 03 13:32:08.29: [26211]: REMOTE NSF "00 00 0E 00 00 00 96 FF 01 07 00 10 00 02 95 C8 18 01 49 02 50 2D 52 2D 4F 20 20 20 20 20 20 20 20 20 20 20 03" Dec 03 13:32:08.29: [26211]: NSF remote fax equipment: Panasonic Dec 03 13:32:08.29: [26211]: NSF remote station ID: "P-R-O " Dec 03 13:32:08.29: [26211]: <-- [9:AT+FRH=3\r] Dec 03 13:32:08.68: [26211]: --> [7:CONNECT] Dec 03 13:32:08.68: [26211]: --> HDLC<11:FF C8 01 04 77 1F 23 01 88 89 C7> Dec 03 13:32:08.78: [26211]: --> [2:OK] Dec 03 13:32:08.78: [26211]: SEND training at v.17 12000 bit/s Dec 03 13:32:08.78: [26211]: <-- [9:AT+FRS=7\r] Dec 03 13:32:08.86: [26211]: --> [2:OK] Dec 03 13:32:08.86: [26211]: <-- [9:AT+FTH=3\r] Dec 03 13:32:08.88: [26211]: --> [7:CONNECT] Dec 03 13:32:08.88: [26211]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04> Dec 03 13:32:08.88: [26211]: <-- data [23] Dec 03 13:32:08.88: [26211]: <-- data [2] Dec 03 13:32:10.46: [26211]: --> [7:CONNECT] Dec 03 13:32:10.46: [26211]: <-- HDLC<7:FF C8 C1 00 56 1F 22> Dec 03 13:32:10.46: [26211]: <-- data [7] Dec 03 13:32:10.46: [26211]: <-- data [2] Dec 03 13:32:10.87: [26211]: --> [2:OK] Dec 03 13:32:10.87: [26211]: <-- [9:AT+FTS=7\r] Dec 03 13:32:10.95: [26211]: --> [2:OK] Dec 03 13:32:10.95: [26211]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled Dec 03 13:32:10.95: [26211]: <-- [11:AT+FTM=121\r] Dec 03 13:32:10.98: [26211]: --> [7:CONNECT] Dec 03 13:32:10.98: [26211]: DELAY 400 ms Dec 03 13:32:11.38: [26211]: <-- data [1024] Dec 03 13:32:11.38: [26211]: <-- data [1024] Dec 03 13:32:11.38: [26211]: <-- data [202] Dec 03 13:32:11.38: [26211]: <-- data [2] Dec 03 13:32:14.01: [26211]: --> [2:OK] Dec 03 13:32:14.01: [26211]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Dec 03 13:32:14.01: [26211]: <-- [9:AT+FRH=3\r] Dec 03 13:32:17.11: [26211]: --> [0:] Dec 03 13:32:17.11: [26211]: MODEM <Empty line> Dec 03 13:32:17.11: [26211]: MODEM TIMEOUT: waiting for v.21 carrier Dec 03 13:32:17.11: [26211]: <-- data [1] Dec 03 13:32:17.12: [26211]: --> [2:OK] Dec 03 13:32:17.12: [26211]: DELAY 1500 ms Dec 03 13:32:18.62: [26211]: SEND training at v.17 9600 bit/s Dec 03 13:32:18.62: [26211]: <-- [9:AT+FRS=7\r] Dec 03 13:32:18.69: [26211]: --> [2:OK] Dec 03 13:32:18.69: [26211]: <-- [9:AT+FTH=3\r] Dec 03 13:32:18.69: [26211]: --> [7:CONNECT] Dec 03 13:32:18.69: [26211]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04> Dec 03 13:32:18.69: [26211]: <-- data [23] Dec 03 13:32:18.69: [26211]: <-- data [2] Dec 03 13:32:20.29: [26211]: --> [7:CONNECT] Dec 03 13:32:20.29: [26211]: <-- HDLC<7:FF C8 C1 00 66 1F 22> Dec 03 13:32:20.29: [26211]: <-- data [7] Dec 03 13:32:20.29: [26211]: <-- data [2] Dec 03 13:32:20.70: [26211]: --> [2:OK] Dec 03 13:32:20.70: [26211]: <-- [9:AT+FTS=7\r] Dec 03 13:32:20.80: [26211]: --> [2:OK] Dec 03 13:32:20.80: [26211]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled Dec 03 13:32:20.80: [26211]: <-- [10:AT+FTM=97\r] Dec 03 13:32:20.83: [26211]: --> [7:CONNECT] Dec 03 13:32:20.83: [26211]: DELAY 400 ms Dec 03 13:32:21.23: [26211]: <-- data [1024] Dec 03 13:32:21.23: [26211]: <-- data [776] Dec 03 13:32:21.23: [26211]: <-- data [2] Dec 03 13:32:23.89: [26211]: --> [2:OK] Dec 03 13:32:23.89: [26211]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Dec 03 13:32:23.89: [26211]: <-- [9:AT+FRH=3\r] Dec 03 13:32:26.99: [26211]: --> [0:] Dec 03 13:32:26.99: [26211]: MODEM <Empty line> Dec 03 13:32:26.99: [26211]: MODEM TIMEOUT: waiting for v.21 carrier Dec 03 13:32:26.99: [26211]: <-- data [1] Dec 03 13:32:27.00: [26211]: --> [2:��] Dec 03 13:32:27.00: [26211]: --> [2:OK] Dec 03 13:32:27.00: [26211]: DELAY 1500 ms Dec 03 13:32:28.50: [26211]: SEND training at v.29 9600 bit/s Dec 03 13:32:28.50: [26211]: <-- [9:AT+FRS=7\r] Dec 03 13:32:28.69: [26211]: --> [2:OK] Dec 03 13:32:28.69: [26211]: <-- [9:AT+FTH=3\r] Dec 03 13:32:28.71: [26211]: --> [7:CONNECT] Dec 03 13:32:28.71: [26211]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04> Dec 03 13:32:28.71: [26211]: <-- data [23] Dec 03 13:32:28.71: [26211]: <-- data [2]

and incoming log

ec 03 13:24:12.71: [24730]: HylaFAX (tm) Version 4.3.10 Dec 03 13:24:12.71: [24730]: SEND FAX: JOB 21 DEST XXXXXXX COMMID 000000104 DEVICE '/dev/ttyIAX1' FROM 'Asterisk VoIP PBX <asterisk@localhost>' USER asterisk Dec 03 13:24:12.71: [24730]: STATE CHANGE: RUNNING -> SENDING Dec 03 13:24:12.71: [24730]: <-- [12:AT+FCLASS=1\r] Dec 03 13:24:12.71: [24730]: --> [2:OK] Dec 03 13:24:12.71: [24730]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled Dec 03 13:24:12.71: [24730]: DIAL XXXXXXXX Dec 03 13:24:12.71: [24730]: <-- [13:ATDTXXXXXXXXX\r] Dec 03 13:24:26.72: [24730]: --> [7:CONNECT] Dec 03 13:24:29.26: [24730]: --> [10:NO CARRIER] Dec 03 13:24:29.26: [24730]: MODEM No carrier Dec 03 13:24:29.26: [24730]: <-- [9:AT+FRS=7\r] Dec 03 13:24:29.32: [24730]: --> [2:OK] Dec 03 13:24:29.32: [24730]: <-- [9:AT+FTH=3\r] Dec 03 13:24:29.34: [24730]: --> [7:CONNECT] Dec 03 13:24:29.34: [24730]: <-- HDLC<3:FF C8 D8> Dec 03 13:24:29.34: [24730]: <-- data [3] Dec 03 13:24:29.34: [24730]: <-- data [2] Dec 03 13:24:30.44: [24730]: --> [2:OK] Dec 03 13:24:30.44: [24730]: SEND send CRP (command repeat) Dec 03 13:24:30.44: [24730]: <-- [9:AT+FRH=3\r] Dec 03 13:24:33.13: [24730]: --> [7:CONNECT] Dec 03 13:24:35.19: [24730]: --> HDLC<42:FF C0 04 00 00 70 00 00 00 69 FF 80 E0 00 08 00 40 A9 13 18 80 92 40 0A B4 4A B4 F2 04 04 04 04 04 04 04 04 04 04 04 C0 D7 2A> Dec 03 13:24:35.19: [24730]: --> [2:OK] Dec 03 13:24:35.19: [24730]: REMOTE NSF "00 00 0E 00 00 00 96 FF 01 07 00 10 00 02 95 C8 18 01 49 02 50 2D 52 2D 4F 20 20 20 20 20 20 20 20 20 20 20 03" Dec 03 13:24:35.19: [24730]: NSF remote fax equipment: Panasonic Dec 03 13:24:35.19: [24730]: NSF remote station ID: "P-R-O " Dec 03 13:24:35.19: [24730]: <-- [9:AT+FRH=3\r] Dec 03 13:24:35.58: [24730]: --> [7:CONNECT] Dec 03 13:24:35.58: [24730]: --> HDLC<11:FF C8 01 04 77 1F 23 01 88 89 C7> Dec 03 13:24:35.70: [24730]: --> [2:OK] Dec 03 13:24:35.70: [24730]: REMOTE best rate 33600 bit/s Dec 03 13:24:35.70: [24730]: REMOTE max A4 page width (215 mm) Dec 03 13:24:35.70: [24730]: REMOTE max unlimited page length Dec 03 13:24:35.70: [24730]: REMOTE best vres 15.4 line/mm Dec 03 13:24:35.70: [24730]: REMOTE format support: MH, MR, MMR Dec 03 13:24:35.70: [24730]: REMOTE supports T.30 Annex A, 256-byte ECM Dec 03 13:24:35.70: [24730]: REMOTE best 0 ms/scanline Dec 03 13:24:35.70: [24730]: USE 14400 bit/s Dec 03 13:24:35.70: [24730]: USE error correction mode Dec 03 13:24:35.70: [24730]: SEND file "docq/doc21.pdf;c1" Dec 03 13:24:35.71: [24730]: USE A4 page width (215 mm) Dec 03 13:24:35.71: [24730]: USE unlimited page length Dec 03 13:24:35.71: [24730]: USE 7.7 line/mm Dec 03 13:24:35.71: [24730]: USE 2-D MMR Dec 03 13:24:35.71: [24730]: USE 0 ms/scanline Dec 03 13:24:35.71: [24730]: SEND training at v.17 14400 bit/s Dec 03 13:24:35.71: [24730]: <-- [9:AT+FRS=7\r] Dec 03 13:24:35.77: [24730]: --> [2:OK] Dec 03 13:24:35.77: [24730]: <-- [9:AT+FTH=3\r] Dec 03 13:24:35.79: [24730]: --> [7:CONNECT] Dec 03 13:24:35.79: [24730]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04> Dec 03 13:24:35.79: [24730]: <-- data [23] Dec 03 13:24:35.79: [24730]: <-- data [2] Dec 03 13:24:37.36: [24730]: --> [7:CONNECT] Dec 03 13:24:37.36: [24730]: <-- HDLC<7:FF C8 C1 00 46 1F 22> Dec 03 13:24:37.36: [24730]: <-- data [7] Dec 03 13:24:37.36: [24730]: <-- data [2] Dec 03 13:24:37.77: [24730]: --> [2:OK] Dec 03 13:24:37.77: [24730]: <-- [9:AT+FTS=7\r] Dec 03 13:24:37.87: [24730]: --> [2:OK] Dec 03 13:24:37.87: [24730]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled Dec 03 13:24:37.87: [24730]: <-- [11:AT+FTM=145\r] Dec 03 13:24:37.89: [24730]: --> [7:CONNECT] Dec 03 13:24:37.89: [24730]: DELAY 400 ms Dec 03 13:24:38.29: [24730]: <-- data [1024] Dec 03 13:24:38.29: [24730]: <-- data [1024] Dec 03 13:24:38.29: [24730]: <-- data [652] Dec 03 13:24:38.29: [24730]: <-- data [2] Dec 03 13:24:40.92: [24730]: --> [2:OK] Dec 03 13:24:40.92: [24730]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Dec 03 13:24:40.92: [24730]: <-- [9:AT+FRH=3\r] Dec 03 13:24:44.02: [24730]: --> [0:] Dec 03 13:24:44.02: [24730]: MODEM <Empty line> Dec 03 13:24:44.02: [24730]: MODEM TIMEOUT: waiting for v.21 carrier Dec 03 13:24:44.02: [24730]: <-- data [1] Dec 03 13:24:44.02: [24730]: --> [2:OK] Dec 03 13:24:44.02: [24730]: DELAY 1500 ms Dec 03 13:24:45.52: [24730]: SEND training at v.17 12000 bit/s Dec 03 13:24:45.52: [24730]: <-- [9:AT+FRS=7\r] Dec 03 13:24:45.73: [24730]: --> [2:OK] Dec 03 13:24:45.73: [24730]: <-- [9:AT+FTH=3\r] Dec 03 13:24:45.75: [24730]: --> [7:CONNECT] Dec 03 13:24:45.75: [24730]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04> Dec 03 13:24:45.75: [24730]: <-- data [23] Dec 03 13:24:45.75: [24730]: <-- data [2] Dec 03 13:24:47.32: [24730]: --> [7:CONNECT] Dec 03 13:24:47.32: [24730]: <-- HDLC<7:FF C8 C1 00 56 1F 22> Dec 03 13:24:47.32: [24730]: <-- data [7] Dec 03 13:24:47.32: [24730]: <-- data [2] Dec 03 13:24:47.73: [24730]: --> [2:OK] Dec 03 13:24:47.73: [24730]: <-- [9:AT+FTS=7\r] Dec 03 13:24:47.83: [24730]: --> [2:OK] Dec 03 13:24:47.83: [24730]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled Dec 03 13:24:47.83: [24730]: <-- [11:AT+FTM=121\r] Dec 03 13:24:47.85: [24730]: --> [7:CONNECT] Dec 03 13:24:47.85: [24730]: DELAY 400 ms Dec 03 13:24:48.25: [24730]: <-- data [1024] Dec 03 13:24:48.25: [24730]: <-- data [1024] Dec 03 13:24:48.25: [24730]: <-- data [202] Dec 03 13:24:48.25: [24730]: <-- data [2] Dec 03 13:24:50.90: [24730]: --> [2:OK] Dec 03 13:24:50.90: [24730]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Dec 03 13:24:50.90: [24730]: <-- [9:AT+FRH=3\r] Dec 03 13:24:51.62: [24730]: --> [7:CONNECT] Dec 03 13:24:53.68: [24730]: --> HDLC<42:FF C0 04 00 00 70 00 00 00 69 FF 80 E0 00 08 00 40 A9 13 18 80 92 40 0A B4 4A B4 F2 04 04 04 04 04 04 04 04 04 04 04 C0 D7 2A> Dec 03 13:24:53.68: [24730]: --> [2:OK] Dec 03 13:24:53.68: [24730]: REMOTE NSF "00 00 0E 00 00 00 96 FF 01 07 00 10 00 02 95 C8 18 01 49 02 50 2D 52 2D 4F 20 20 20 20 20 20 20 20 20 20 20 03" Dec 03 13:24:53.68: [24730]: NSF remote fax equipment: Panasonic Dec 03 13:24:53.68: [24730]: NSF remote station ID: "P-R-O " Dec 03 13:24:53.68: [24730]: <-- [9:AT+FRH=3\r] Dec 03 13:24:54.09: [24730]: --> [7:CONNECT] Dec 03 13:24:54.09: [24730]: --> HDLC<11:FF C8 01 04 77 1F 23 01 88 89 C7> Dec 03 13:24:54.19: [24730]: --> [2:OK] Dec 03 13:24:54.19: [24730]: SEND training at v.17 12000 bit/s Dec 03 13:24:54.19: [24730]: <-- [9:AT+FRS=7\r] Dec 03 13:24:54.28: [24730]: --> [2:OK] Dec 03 13:24:54.28: [24730]: <-- [9:AT+FTH=3\r] Dec 03 13:24:54.30: [24730]: --> [7:CONNECT] Dec 03 13:24:54.30: [24730]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04> Dec 03 13:24:54.30: [24730]: <-- data [23] Dec 03 13:24:54.30: [24730]: <-- data [2] Dec 03 13:24:55.88: [24730]: --> [7:CONNECT] Dec 03 13:24:55.88: [24730]: <-- HDLC<7:FF C8 C1 00 56 1F 22> Dec 03 13:24:55.88: [24730]: <-- data [7] Dec 03 13:24:55.88: [24730]: <-- data [2] Dec 03 13:24:56.29: [24730]: --> [2:OK] Dec 03 13:24:56.29: [24730]: <-- [9:AT+FTS=7\r] Dec 03 13:24:56.39: [24730]: --> [2:OK] Dec 03 13:24:56.39: [24730]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled Dec 03 13:24:56.39: [24730]: <-- [11:AT+FTM=121\r] Dec 03 13:24:56.41: [24730]: --> [7:CONNECT] Dec 03 13:24:56.41: [24730]: DELAY 400 ms Dec 03 13:24:56.81: [24730]: <-- data [1024] Dec 03 13:24:56.81: [24730]: <-- data [1024] Dec 03 13:24:56.81: [24730]: <-- data [202] Dec 03 13:24:56.81: [24730]: <-- data [2] Dec 03 13:24:59.45: [24730]: --> [2:OK] Dec 03 13:24:59.45: [24730]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Dec 03 13:24:59.45: [24730]: <-- [9:AT+FRH=3\r] Dec 03 13:25:02.55: [24730]: --> [0:] Dec 03 13:25:02.55: [24730]: MODEM <Empty line> Dec 03 13:25:02.55: [24730]: MODEM TIMEOUT: waiting for v.21 carrier Dec 03 13:25:02.55: [24730]: <-- data [1] Dec 03 13:25:02.57: [24730]: --> [2:OK] Dec 03 13:25:02.57: [24730]: DELAY 1500 ms Dec 03 13:25:04.07: [24730]: SEND training at v.17 9600 bit/s Dec 03 13:25:04.07: [24730]: <-- [9:AT+FRS=7\r] Dec 03 13:25:04.27: [24730]: --> [2:OK] Dec 03 13:25:04.27: [24730]: <-- [9:AT+FTH=3\r] Dec 03 13:25:04.29: [24730]: --> [7:CONNECT] Dec 03 13:25:04.29: [24730]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04> Dec 03 13:25:04.29: [24730]: <-- data [23] Dec 03 13:25:04.29: [24730]: <-- data [2] Dec 03 13:25:05.89: [24730]: --> [7:CONNECT] Dec 03 13:25:05.89: [24730]: <-- HDLC<7:FF C8 C1 00 66 1F 22> Dec 03 13:25:05.89: [24730]: <-- data [7] Dec 03 13:25:05.89: [24730]: <-- data [2] Dec 03 13:25:06.30: [24730]: --> [2:OK] Dec 03 13:25:06.30: [24730]: <-- [9:AT+FTS=7\r] Dec 03 13:25:06.40: [24730]: --> [2:OK] Dec 03 13:25:06.40: [24730]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled Dec 03 13:25:06.40: [24730]: <-- [10:AT+FTM=97\r] Dec 03 13:25:06.43: [24730]: --> [7:CONNECT] Dec 03 13:25:06.43: [24730]: DELAY 400 ms Dec 03 13:25:06.83: [24730]: <-- data [1024] Dec 03 13:25:06.83: [24730]: <-- data [776] Dec 03 13:25:06.83: [24730]: <-- data [2] Dec 03 13:25:09.49: [24730]: --> [2:OK] Dec 03 13:25:09.49: [24730]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Dec 03 13:25:09.49: [24730]: <-- [9:AT+FRH=3\r] Dec 03 13:25:12.59: [24730]: --> [0:] Dec 03 13:25:12.59: [24730]: MODEM <Empty line> Dec 03 13:25:12.59: [24730]: MODEM TIMEOUT: waiting for v.21 carrier Dec 03 13:25:12.59: [24730]: <-- data [1] Dec 03 13:25:12.59: [24730]: --> [2:��] Dec 03 13:25:12.59: [24730]: --> [2:OK] Dec 03 13:25:12.59: [24730]: DELAY 1500 ms Dec 03 13:25:14.09: [24730]: SEND training at v.29 9600 bit/s Dec 03 13:25:14.09: [24730]: <-- [9:AT+FRS=7\r] Dec 03 13:25:14.18: [24730]: --> [2:OK] Dec 03 13:25:14.18: [24730]: <-- [9:AT+FTH=3\r] Dec 03 13:25:14.20: [24730]: --> [7:CONNECT] Dec 03 13:25:14.20: [24730]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04> Dec 03 13:25:14.20: [24730]: <-- data [23] Dec 03 13:25:14.20: [24730]: <-- data [2] Dec 03 13:25:15.79: [24730]: --> [7:CONNECT]

i appriciate that.

Community Pages

HylaFAX.org invites all HylaFAX users to add their own information to the Community Pages. Some recommendations include: HylaFAX hardware/software reviews, advice, or desired HylaFAX features. But please feel free to add whatever relevant information you think other HylaFAX users would be interested in.

**WARNING** Please note that this section of the site is subject to much less editorial review than the main Documentation section (for instance), and the information contained herein may occasionally need to be viewed with some skepticism. If you read anything that you believe is entirely incorrect or grossly misleading, please feel free to add a comment that says so, or change it to be more correct yourself!

• Reviews: Contributed reviews and/or rants of anything HylaFAX
• Advice
  • Cheap Class1 Modems
• Wishlist: Things you would like to see added to HylaFAX
• Press: Please add any articles written about HylaFAX
• Howtos
  • Install Diva Server and HylaFAX from source on Ubuntu 9.0.4: