HylaFAX Difference between revisions of "FreeBSD Start Guide"
(→FreeBSD 7.2 Hylafax quick install) |
(Remove FreeBSD 8.x and 'Current version' specifics because things become stale quick, confusing users) |
||
| Line 1: | Line 1: | ||
| − | ==FreeBSD | + | ==FreeBSD Hylafax quick install== |
We need to install following ports: | We need to install following ports: | ||
*/print/ghostscript8-nox11 | */print/ghostscript8-nox11 | ||
*/shells/bash | */shells/bash | ||
| − | */comms/hylafax | + | */comms/hylafax |
Revision as of 05:30, 17 February 2013
FreeBSD Hylafax quick install
We need to install following ports:
- /print/ghostscript8-nox11
- /shells/bash
- /comms/hylafax
cd /usr/ports/print/ghostscript8-nox11 make install clean cd /usr/ports/shells/bash make install clean cd /usr/ports/comms/hylafax make install clean
Configuration
- run hylafax setup:
/usr/local/sbin/faxsetup
- run modem setup for each modem
( serial port : COM1=cuau0, COM2=cuau1 )
/usr/local/sbin/faxaddmodem
Autorun
to make sure the hylafax start with system edit /etc/rc.conf and add:
hylafax_enable="YES"
Information
- config directory : /var/spool/hylafax/etc
- configuration file for cuau0 modem : config.cuau0
FreeBSD 8.0 [amd64, i386] The uart(4) driver is now the default driver for serial port devices in favor of the sio(4) driver. Note that the device nodes have been renamed from /dev/cuadN and /dev/ttydN to /dev/cuauN and /dev/ttyuN.
