HylaFAX Difference between revisions of "FreeBSD Start Guide"
(→Information) |
(→FreeBSD 7.2 Hylafax quick install) |
||
| Line 1: | Line 1: | ||
| − | ==FreeBSD | + | ==FreeBSD 8.0 Hylafax quick install== |
We need to install following ports: | We need to install following ports: | ||
Revision as of 11:29, 15 April 2010
FreeBSD 8.0 Hylafax quick install
We need to install following ports:
- /print/ghostscript8-nox11
- /shells/bash
- /comms/hylafax (current version hylafx-6.0.2)
cd /usr/ports/print/ghostscript8-nox11 make install clean cd /usr/ports/shells/bash make install clean cd /usr/ports/comms/hylafax make install clean
Configuration
- run hylafax setup:
/usr/local/sbin/faxsetup
- run modem setup for each modem
( serial port : COM1=cuau0, COM2=cuau1 )
/usr/local/sbin/faxaddmodem
Autorun
to make sure the hylafax start with system edit /etc/rc.conf and add:
hylafax_enable="YES"
Information
- config directory : /var/spool/hylafax/etc
- configuration file for cuau0 modem : config.cuau0
FreeBSD 8.0 [amd64, i386] The uart(4) driver is now the default driver for serial port devices in favor of the sio(4) driver. Note that the device nodes have been renamed from /dev/cuadN and /dev/ttydN to /dev/cuauN and /dev/ttyuN.
