Personal tools
HylaFAX The world's most advanced open source fax server

Difference between revisions of "User:Pedram"

m (Created page with 'hi i have a elastix server 2.4 version and e1 line between my gateway and elastix. i config fax server and evrythings ok but can't send and recieve fax from outside of company. …')
 
(Blanked the page)
 
Line 1: Line 1:
−
hi
 
−
i have a elastix server 2.4 version and e1 line between my gateway and elastix. i config fax server and evrythings ok but can't send and recieve fax from outside of company. this hylafax log about reciving:
 
  
−
Dec 03 13:31:23.63: [26211]: SESSION BEGIN 000000106 XXXXXXXXX
 
−
Dec 03 13:31:23.63: [26211]: HylaFAX (tm) Version 4.3.10
 
−
Dec 03 13:31:23.63: [26211]: SEND FAX: JOB 21 DEST XXXXXXXX COMMID 000000106 DEVICE '/dev/ttyIAX1' FROM 'Asterisk VoIP PBX <asterisk@localhost>' USER asterisk
 
−
Dec 03 13:31:23.63: [26211]: STATE CHANGE: RUNNING -> SENDING
 
−
Dec 03 13:31:23.63: [26211]: <-- [12:AT+FCLASS=1\r]
 
−
Dec 03 13:31:23.63: [26211]: --> [2:OK]
 
−
Dec 03 13:31:23.63: [26211]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
 
−
Dec 03 13:31:23.63: [26211]: DIAL XXXXXXXX
 
−
Dec 03 13:31:23.63: [26211]: <-- [13:ATDTXXXXXXXX\r]
 
−
Dec 03 13:31:37.05: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:31:39.53: [26211]: --> [20:9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7]
 
−
Dec 03 13:31:39.53: [26211]: --> [20:79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E]
 
−
Dec 03 13:31:39.53: [26211]: --> [20:E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79]
 
−
Dec 03 13:31:39.53: [26211]: --> [20:9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7 79 9E E7]
 
−
Dec 03 13:31:39.53: [26211]: --> [14:79 9E E7 79 9E E7 79 9E E7 79 9E F7 10 03]
 
−
Dec 03 13:31:39.53: [26211]: --> [5:ERROR]
 
−
Dec 03 13:31:39.53: [26211]: MODEM Command error
 
−
Dec 03 13:31:39.53: [26211]: FCS error
 
−
Dec 03 13:31:39.53: [26211]: <-- [9:AT+FRS=7\r]
 
−
Dec 03 13:31:39.67: [26211]: --> [2:OK]
 
−
Dec 03 13:31:39.67: [26211]: <-- [9:AT+FTH=3\r]
 
−
Dec 03 13:31:39.69: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:31:39.69: [26211]: <-- HDLC<3:FF C8 D8>
 
−
Dec 03 13:31:39.69: [26211]: <-- data [3]
 
−
Dec 03 13:31:39.69: [26211]: <-- data [2]
 
−
Dec 03 13:31:40.78: [26211]: --> [2:OK]
 
−
Dec 03 13:31:40.78: [26211]: SEND send CRP (command repeat)
 
−
Dec 03 13:31:40.78: [26211]: <-- [9:AT+FRH=3\r]
 
−
Dec 03 13:31:43.49: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:31:45.56: [26211]: --> HDLC<42:FF C0 04 00 00 70 00 00 00 69 FF 80 E0 00 08 00 40 A9 13 18 80 92 40 0A B4 4A B4 F2 04 04 04 04 04 04 04 04 04 04 04 C0 D7 2A>
 
−
Dec 03 13:31:45.56: [26211]: --> [2:OK]
 
−
Dec 03 13:31:45.56: [26211]: REMOTE NSF "00 00 0E 00 00 00 96 FF 01 07 00 10 00 02 95 C8 18 01 49 02 50 2D 52 2D 4F 20 20 20 20 20 20 20 20 20 20 20 03"
 
−
Dec 03 13:31:45.56: [26211]: NSF remote fax equipment: Panasonic
 
−
Dec 03 13:31:45.56: [26211]: NSF remote station ID: "P-R-O          "
 
−
Dec 03 13:31:45.56: [26211]: <-- [9:AT+FRH=3\r]
 
−
Dec 03 13:31:45.96: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:31:45.96: [26211]: --> HDLC<12:FF C8 01 04 77 11 E2 30 18 88 9C 77>
 
−
Dec 03 13:31:45.96: [26211]: --> [5:ERROR]
 
−
Dec 03 13:31:45.96: [26211]: MODEM Command error
 
−
Dec 03 13:31:45.96: [26211]: FCS error
 
−
Dec 03 13:31:45.96: [26211]: <-- [9:AT+FRS=7\r]
 
−
Dec 03 13:31:46.13: [26211]: --> [2:OK]
 
−
Dec 03 13:31:46.13: [26211]: <-- [9:AT+FTH=3\r]
 
−
Dec 03 13:31:46.15: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:31:46.15: [26211]: <-- HDLC<3:FF C8 D8>
 
−
Dec 03 13:31:46.15: [26211]: <-- data [3]
 
−
Dec 03 13:31:46.15: [26211]: <-- data [2]
 
−
Dec 03 13:31:47.25: [26211]: --> [2:OK]
 
−
Dec 03 13:31:47.25: [26211]: SEND send CRP (command repeat)
 
−
Dec 03 13:31:47.25: [26211]: <-- [9:AT+FRH=3\r]
 
−
Dec 03 13:31:47.89: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:31:49.95: [26211]: --> HDLC<42:FF C0 04 00 00 70 00 00 00 69 FF 80 E0 00 08 00 40 A9 13 18 80 92 40 0A B4 4A B4 F2 04 04 04 04 04 04 04 04 04 04 04 C0 D7 2A>
 
−
Dec 03 13:31:49.95: [26211]: --> [2:OK]
 
−
Dec 03 13:31:49.95: [26211]: REMOTE NSF "00 00 0E 00 00 00 96 FF 01 07 00 10 00 02 95 C8 18 01 49 02 50 2D 52 2D 4F 20 20 20 20 20 20 20 20 20 20 20 03"
 
−
Dec 03 13:31:49.95: [26211]: NSF remote fax equipment: Panasonic
 
−
Dec 03 13:31:49.95: [26211]: NSF remote station ID: "P-R-O          "
 
−
Dec 03 13:31:49.95: [26211]: <-- [9:AT+FRH=3\r]
 
−
Dec 03 13:31:50.34: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:31:50.34: [26211]: --> HDLC<11:FF C8 01 04 77 1F 23 01 88 89 C7>
 
−
Dec 03 13:31:50.46: [26211]: --> [2:OK]
 
−
Dec 03 13:31:50.46: [26211]: REMOTE best rate 33600 bit/s
 
−
Dec 03 13:31:50.46: [26211]: REMOTE max A4 page width (215 mm)
 
−
Dec 03 13:31:50.46: [26211]: REMOTE max unlimited page length
 
−
Dec 03 13:31:50.46: [26211]: REMOTE best vres 15.4 line/mm
 
−
Dec 03 13:31:50.46: [26211]: REMOTE format support: MH, MR, MMR
 
−
Dec 03 13:31:50.46: [26211]: REMOTE supports T.30 Annex A, 256-byte ECM
 
−
Dec 03 13:31:50.46: [26211]: REMOTE best 0 ms/scanline
 
−
Dec 03 13:31:50.46: [26211]: USE 14400 bit/s
 
−
Dec 03 13:31:50.46: [26211]: USE error correction mode
 
−
Dec 03 13:31:50.46: [26211]: SEND file "docq/doc21.pdf;c1"
 
−
Dec 03 13:31:50.46: [26211]: USE A4 page width (215 mm)
 
−
Dec 03 13:31:50.46: [26211]: USE unlimited page length
 
−
Dec 03 13:31:50.46: [26211]: USE 7.7 line/mm
 
−
Dec 03 13:31:50.46: [26211]: USE 2-D MMR
 
−
Dec 03 13:31:50.46: [26211]: USE 0 ms/scanline
 
−
Dec 03 13:31:50.46: [26211]: SEND training at v.17 14400 bit/s
 
−
Dec 03 13:31:50.46: [26211]: <-- [9:AT+FRS=7\r]
 
−
Dec 03 13:31:50.52: [26211]: --> [2:OK]
 
−
Dec 03 13:31:50.52: [26211]: <-- [9:AT+FTH=3\r]
 
−
Dec 03 13:31:50.54: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:31:50.54: [26211]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
 
−
Dec 03 13:31:50.54: [26211]: <-- data [23]
 
−
Dec 03 13:31:50.54: [26211]: <-- data [2]
 
−
Dec 03 13:31:52.11: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:31:52.11: [26211]: <-- HDLC<7:FF C8 C1 00 46 1F 22>
 
−
Dec 03 13:31:52.11: [26211]: <-- data [7]
 
−
Dec 03 13:31:52.11: [26211]: <-- data [2]
 
−
Dec 03 13:31:52.52: [26211]: --> [2:OK]
 
−
Dec 03 13:31:52.52: [26211]: <-- [9:AT+FTS=7\r]
 
−
Dec 03 13:31:52.62: [26211]: --> [2:OK]
 
−
Dec 03 13:31:52.62: [26211]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
 
−
Dec 03 13:31:52.62: [26211]: <-- [11:AT+FTM=145\r]
 
−
Dec 03 13:31:52.64: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:31:52.64: [26211]: DELAY 400 ms
 
−
Dec 03 13:31:53.04: [26211]: <-- data [1024]
 
−
Dec 03 13:31:53.04: [26211]: <-- data [1024]
 
−
Dec 03 13:31:53.04: [26211]: <-- data [652]
 
−
Dec 03 13:31:53.04: [26211]: <-- data [2]
 
−
Dec 03 13:31:55.66: [26211]: --> [2:OK]
 
−
Dec 03 13:31:55.66: [26211]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
 
−
Dec 03 13:31:55.66: [26211]: <-- [9:AT+FRH=3\r]
 
−
Dec 03 13:31:58.76: [26211]: --> [0:]
 
−
Dec 03 13:31:58.76: [26211]: MODEM <Empty line>
 
−
Dec 03 13:31:58.76: [26211]: MODEM TIMEOUT: waiting for v.21 carrier
 
−
Dec 03 13:31:58.76: [26211]: <-- data [1]
 
−
Dec 03 13:31:58.76: [26211]: --> [2:OK]
 
−
Dec 03 13:31:58.76: [26211]: DELAY 1500 ms
 
−
Dec 03 13:32:00.26: [26211]: SEND training at v.17 12000 bit/s
 
−
Dec 03 13:32:00.26: [26211]: <-- [9:AT+FRS=7\r]
 
−
Dec 03 13:32:00.32: [26211]: --> [2:OK]
 
−
Dec 03 13:32:00.32: [26211]: <-- [9:AT+FTH=3\r]
 
−
Dec 03 13:32:00.35: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:00.35: [26211]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
 
−
Dec 03 13:32:00.35: [26211]: <-- data [23]
 
−
Dec 03 13:32:00.35: [26211]: <-- data [2]
 
−
Dec 03 13:32:01.93: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:01.93: [26211]: <-- HDLC<7:FF C8 C1 00 56 1F 22>
 
−
Dec 03 13:32:01.93: [26211]: <-- data [7]
 
−
Dec 03 13:32:01.93: [26211]: <-- data [2]
 
−
Dec 03 13:32:02.34: [26211]: --> [2:OK]
 
−
Dec 03 13:32:02.34: [26211]: <-- [9:AT+FTS=7\r]
 
−
Dec 03 13:32:02.45: [26211]: --> [2:OK]
 
−
Dec 03 13:32:02.45: [26211]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
 
−
Dec 03 13:32:02.45: [26211]: <-- [11:AT+FTM=121\r]
 
−
Dec 03 13:32:02.47: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:02.47: [26211]: DELAY 400 ms
 
−
Dec 03 13:32:02.87: [26211]: <-- data [1024]
 
−
Dec 03 13:32:02.87: [26211]: <-- data [1024]
 
−
Dec 03 13:32:02.87: [26211]: <-- data [202]
 
−
Dec 03 13:32:02.87: [26211]: <-- data [2]
 
−
Dec 03 13:32:05.51: [26211]: --> [2:OK]
 
−
Dec 03 13:32:05.51: [26211]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
 
−
Dec 03 13:32:05.51: [26211]: <-- [9:AT+FRH=3\r]
 
−
Dec 03 13:32:06.21: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:08.29: [26211]: --> HDLC<42:FF C0 04 00 00 70 00 00 00 69 FF 80 E0 00 08 00 40 A9 13 18 80 92 40 0A B4 4A B4 F2 04 04 04 04 04 04 04 04 04 04 04 C0 D7 2A>
 
−
Dec 03 13:32:08.29: [26211]: --> [2:OK]
 
−
Dec 03 13:32:08.29: [26211]: REMOTE NSF "00 00 0E 00 00 00 96 FF 01 07 00 10 00 02 95 C8 18 01 49 02 50 2D 52 2D 4F 20 20 20 20 20 20 20 20 20 20 20 03"
 
−
Dec 03 13:32:08.29: [26211]: NSF remote fax equipment: Panasonic
 
−
Dec 03 13:32:08.29: [26211]: NSF remote station ID: "P-R-O          "
 
−
Dec 03 13:32:08.29: [26211]: <-- [9:AT+FRH=3\r]
 
−
Dec 03 13:32:08.68: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:08.68: [26211]: --> HDLC<11:FF C8 01 04 77 1F 23 01 88 89 C7>
 
−
Dec 03 13:32:08.78: [26211]: --> [2:OK]
 
−
Dec 03 13:32:08.78: [26211]: SEND training at v.17 12000 bit/s
 
−
Dec 03 13:32:08.78: [26211]: <-- [9:AT+FRS=7\r]
 
−
Dec 03 13:32:08.86: [26211]: --> [2:OK]
 
−
Dec 03 13:32:08.86: [26211]: <-- [9:AT+FTH=3\r]
 
−
Dec 03 13:32:08.88: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:08.88: [26211]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
 
−
Dec 03 13:32:08.88: [26211]: <-- data [23]
 
−
Dec 03 13:32:08.88: [26211]: <-- data [2]
 
−
Dec 03 13:32:10.46: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:10.46: [26211]: <-- HDLC<7:FF C8 C1 00 56 1F 22>
 
−
Dec 03 13:32:10.46: [26211]: <-- data [7]
 
−
Dec 03 13:32:10.46: [26211]: <-- data [2]
 
−
Dec 03 13:32:10.87: [26211]: --> [2:OK]
 
−
Dec 03 13:32:10.87: [26211]: <-- [9:AT+FTS=7\r]
 
−
Dec 03 13:32:10.95: [26211]: --> [2:OK]
 
−
Dec 03 13:32:10.95: [26211]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
 
−
Dec 03 13:32:10.95: [26211]: <-- [11:AT+FTM=121\r]
 
−
Dec 03 13:32:10.98: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:10.98: [26211]: DELAY 400 ms
 
−
Dec 03 13:32:11.38: [26211]: <-- data [1024]
 
−
Dec 03 13:32:11.38: [26211]: <-- data [1024]
 
−
Dec 03 13:32:11.38: [26211]: <-- data [202]
 
−
Dec 03 13:32:11.38: [26211]: <-- data [2]
 
−
Dec 03 13:32:14.01: [26211]: --> [2:OK]
 
−
Dec 03 13:32:14.01: [26211]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
 
−
Dec 03 13:32:14.01: [26211]: <-- [9:AT+FRH=3\r]
 
−
Dec 03 13:32:17.11: [26211]: --> [0:]
 
−
Dec 03 13:32:17.11: [26211]: MODEM <Empty line>
 
−
Dec 03 13:32:17.11: [26211]: MODEM TIMEOUT: waiting for v.21 carrier
 
−
Dec 03 13:32:17.11: [26211]: <-- data [1]
 
−
Dec 03 13:32:17.12: [26211]: --> [2:OK]
 
−
Dec 03 13:32:17.12: [26211]: DELAY 1500 ms
 
−
Dec 03 13:32:18.62: [26211]: SEND training at v.17 9600 bit/s
 
−
Dec 03 13:32:18.62: [26211]: <-- [9:AT+FRS=7\r]
 
−
Dec 03 13:32:18.69: [26211]: --> [2:OK]
 
−
Dec 03 13:32:18.69: [26211]: <-- [9:AT+FTH=3\r]
 
−
Dec 03 13:32:18.69: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:18.69: [26211]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
 
−
Dec 03 13:32:18.69: [26211]: <-- data [23]
 
−
Dec 03 13:32:18.69: [26211]: <-- data [2]
 
−
Dec 03 13:32:20.29: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:20.29: [26211]: <-- HDLC<7:FF C8 C1 00 66 1F 22>
 
−
Dec 03 13:32:20.29: [26211]: <-- data [7]
 
−
Dec 03 13:32:20.29: [26211]: <-- data [2]
 
−
Dec 03 13:32:20.70: [26211]: --> [2:OK]
 
−
Dec 03 13:32:20.70: [26211]: <-- [9:AT+FTS=7\r]
 
−
Dec 03 13:32:20.80: [26211]: --> [2:OK]
 
−
Dec 03 13:32:20.80: [26211]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
 
−
Dec 03 13:32:20.80: [26211]: <-- [10:AT+FTM=97\r]
 
−
Dec 03 13:32:20.83: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:20.83: [26211]: DELAY 400 ms
 
−
Dec 03 13:32:21.23: [26211]: <-- data [1024]
 
−
Dec 03 13:32:21.23: [26211]: <-- data [776]
 
−
Dec 03 13:32:21.23: [26211]: <-- data [2]
 
−
Dec 03 13:32:23.89: [26211]: --> [2:OK]
 
−
Dec 03 13:32:23.89: [26211]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
 
−
Dec 03 13:32:23.89: [26211]: <-- [9:AT+FRH=3\r]
 
−
Dec 03 13:32:26.99: [26211]: --> [0:]
 
−
Dec 03 13:32:26.99: [26211]: MODEM <Empty line>
 
−
Dec 03 13:32:26.99: [26211]: MODEM TIMEOUT: waiting for v.21 carrier
 
−
Dec 03 13:32:26.99: [26211]: <-- data [1]
 
−
Dec 03 13:32:27.00: [26211]: --> [2:��]
 
−
Dec 03 13:32:27.00: [26211]: --> [2:OK]
 
−
Dec 03 13:32:27.00: [26211]: DELAY 1500 ms
 
−
Dec 03 13:32:28.50: [26211]: SEND training at v.29 9600 bit/s
 
−
Dec 03 13:32:28.50: [26211]: <-- [9:AT+FRS=7\r]
 
−
Dec 03 13:32:28.69: [26211]: --> [2:OK]
 
−
Dec 03 13:32:28.69: [26211]: <-- [9:AT+FTH=3\r]
 
−
Dec 03 13:32:28.71: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:28.71: [26211]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
 
−
Dec 03 13:32:28.71: [26211]: <-- data [23]
 
−
Dec 03 13:32:28.71: [26211]: <-- data [2]
 
−
Dec 03 13:32:30.30: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:30.30: [26211]: <-- HDLC<7:FF C8 C1 00 62 1F 22>
 
−
Dec 03 13:32:30.30: [26211]: <-- data [7]
 
−
Dec 03 13:32:30.30: [26211]: <-- data [2]
 
−
Dec 03 13:32:30.71: [26211]: --> [2:OK]
 
−
Dec 03 13:32:30.71: [26211]: <-- [9:AT+FTS=7\r]
 
−
Dec 03 13:32:30.82: [26211]: --> [2:OK]
 
−
Dec 03 13:32:30.82: [26211]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
 
−
Dec 03 13:32:30.82: [26211]: <-- [10:AT+FTM=96\r]
 
−
Dec 03 13:32:30.84: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:30.84: [26211]: DELAY 400 ms
 
−
Dec 03 13:32:31.24: [26211]: <-- data [1024]
 
−
Dec 03 13:32:31.24: [26211]: <-- data [776]
 
−
Dec 03 13:32:31.24: [26211]: <-- data [2]
 
−
Dec 03 13:32:32.84: [26211]: --> [2:OK]
 
−
Dec 03 13:32:32.84: [26211]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
 
−
Dec 03 13:32:32.84: [26211]: <-- [9:AT+FRH=3\r]
 
−
Dec 03 13:32:35.94: [26211]: --> [0:]
 
−
Dec 03 13:32:35.94: [26211]: MODEM <Empty line>
 
−
Dec 03 13:32:35.94: [26211]: MODEM TIMEOUT: waiting for v.21 carrier
 
−
Dec 03 13:32:35.94: [26211]: <-- data [1]
 
−
Dec 03 13:32:35.94: [26211]: --> [2:��]
 
−
Dec 03 13:32:35.94: [26211]: --> [2:OK]
 
−
Dec 03 13:32:35.94: [26211]: DELAY 1500 ms
 
−
Dec 03 13:32:37.44: [26211]: SEND training at v.29 7200 bit/s
 
−
Dec 03 13:32:37.44: [26211]: <-- [9:AT+FRS=7\r]
 
−
Dec 03 13:32:37.69: [26211]: --> [2:OK]
 
−
Dec 03 13:32:37.69: [26211]: <-- [9:AT+FTH=3\r]
 
−
Dec 03 13:32:37.71: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:37.71: [26211]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
 
−
Dec 03 13:32:37.71: [26211]: <-- data [23]
 
−
Dec 03 13:32:37.71: [26211]: <-- data [2]
 
−
Dec 03 13:32:39.29: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:39.29: [26211]: <-- HDLC<7:FF C8 C1 00 72 1F 22>
 
−
Dec 03 13:32:39.29: [26211]: <-- data [7]
 
−
Dec 03 13:32:39.29: [26211]: <-- data [2]
 
−
Dec 03 13:32:39.70: [26211]: --> [2:OK]
 
−
Dec 03 13:32:39.70: [26211]: <-- [9:AT+FTS=7\r]
 
−
Dec 03 13:32:39.81: [26211]: --> [2:OK]
 
−
Dec 03 13:32:39.81: [26211]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
 
−
Dec 03 13:32:39.81: [26211]: <-- [10:AT+FTM=72\r]
 
−
Dec 03 13:32:39.83: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:39.83: [26211]: DELAY 400 ms
 
−
Dec 03 13:32:40.23: [26211]: <-- data [1024]
 
−
Dec 03 13:32:40.23: [26211]: <-- data [326]
 
−
Dec 03 13:32:40.23: [26211]: <-- data [2]
 
−
Dec 03 13:32:41.82: [26211]: --> [2:OK]
 
−
Dec 03 13:32:41.82: [26211]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
 
−
Dec 03 13:32:41.82: [26211]: <-- [9:AT+FRH=3\r]
 
−
Dec 03 13:32:44.92: [26211]: --> [0:]
 
−
Dec 03 13:32:44.92: [26211]: MODEM <Empty line>
 
−
Dec 03 13:32:44.92: [26211]: MODEM TIMEOUT: waiting for v.21 carrier
 
−
Dec 03 13:32:44.92: [26211]: <-- data [1]
 
−
Dec 03 13:32:44.94: [26211]: --> [2:��]
 
−
Dec 03 13:32:44.94: [26211]: --> [2:OK]
 
−
Dec 03 13:32:44.94: [26211]: DELAY 1500 ms
 
−
Dec 03 13:32:46.44: [26211]: SEND training at v.27ter 4800 bit/s
 
−
Dec 03 13:32:46.44: [26211]: <-- [9:AT+FRS=7\r]
 
−
Dec 03 13:32:46.70: [26211]: --> [2:OK]
 
−
Dec 03 13:32:46.70: [26211]: <-- [9:AT+FTH=3\r]
 
−
Dec 03 13:32:46.72: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:46.72: [26211]: <-- HDLC<23:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
 
−
Dec 03 13:32:46.72: [26211]: <-- data [23]
 
−
Dec 03 13:32:46.72: [26211]: <-- data [2]
 
−
Dec 03 13:32:48.30: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:48.30: [26211]: <-- HDLC<7:FF C8 C1 00 52 1F 22>
 
−
Dec 03 13:32:48.30: [26211]: <-- data [7]
 
−
Dec 03 13:32:48.30: [26211]: <-- data [2]
 
−
Dec 03 13:32:48.71: [26211]: --> [2:OK]
 
−
Dec 03 13:32:48.71: [26211]: <-- [9:AT+FTS=7\r]
 
−
Dec 03 13:32:48.81: [26211]: --> [2:OK]
 
−
Dec 03 13:32:48.81: [26211]: MODEM set XON/XOFF/FLUSH: input interpreted, output disabled
 
−
Dec 03 13:32:48.81: [26211]: <-- [10:AT+FTM=48\r]
 
−
Dec 03 13:32:48.83: [26211]: --> [7:CONNECT]
 
−
Dec 03 13:32:48.83: [26211]: DELAY 400 ms
 
−
Dec 03 13:32:49.23: [26211]: <-- data [900]
 
−
Dec 03 13:32:49.23: [26211]: <-- data [2]
 
−
Dec 03 13:32:49.63: [26211]: --> [10:NO CARRIER]
 
−
Dec 03 13:32:49.63: [26211]: MODEM No carrier
 
−
Dec 03 13:32:50.47: [26211]: ABORT: job abort requested
 
−
Dec 03 13:32:59.99: [26211]: --> [9:DATE=1203]
 
−
Dec 03 13:32:59.99: [26211]: --> [9:TIME=1332]
 
−
Dec 03 13:32:59.99: [26211]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
 
−
Dec 03 13:32:59.99: [26211]: TRAINING failed
 
−
Dec 03 13:32:59.99: [26211]: SEND: Giving up after 3 attempts to send same page "docq/doc21.pdf;c1", dirnum 0
 
−
Dec 03 13:32:59.99: [26211]: <-- [9:AT+FTH=3\r]
 
−
Dec 03 13:32:59.99: [26211]: --> [15:NAME=2188591946]
 
−
Dec 03 13:32:59.99: [26211]: MODEM input buffering enabled
 
−
Dec 03 13:32:59.99: [26211]: SEND FAILED: JOB 21 DEST XXXXXXXX ERR Call aborted by user
 
−
Dec 03 13:32:59.99: [26211]: <-- [5:ATH0\r]
 
−
Dec 03 13:32:59.99: [26211]: --> [15:NMBR=2188591946]
 
−
Dec 03 13:32:59.99: [26211]: --> [11:ANID=<NONE>]
 
−
Dec 03 13:32:59.99: [26211]: --> [11:USER=<NONE>]
 
−
Dec 03 13:32:59.99: [26211]: --> [11:PASS=<NONE>]
 
−
Dec 03 13:32:59.99: [26211]: --> [11:CDID=<NONE>]
 
−
Dec 03 13:32:59.99: [26211]: --> [6:NDID=s]
 
−
Dec 03 13:32:59.99: [26211]: --> [4:RING]
 
−
Dec 03 13:32:59.99: [26211]: MODEM Ring
 
−
Dec 03 13:33:00.09: [26211]: --> [5:ERROR]
 
−
Dec 03 13:33:00.09: [26211]: MODEM Command error
 
−
Dec 03 13:33:00.09: [26211]: <-- [5:ATH0\r]
 
−
Dec 03 13:33:00.09: [26211]: --> [2:OK]
 
−
Dec 03 13:33:00.09: [26211]: MODEM set DTR OFF
 
−
Dec 03 13:33:00.09: [26211]: MODEM set baud rate: 0 baud (flow control unchanged)
 
−
Dec 03 13:33:00.09: [26211]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
 
−
Dec 03 13:33:00.09: [26211]: SESSION END
 

Latest revision as of 11:11, 3 December 2013

Retrieved from "https://legacy.hylafax.org/index.php?title=User:Pedram&oldid=5376"

This page was last edited on 3 December 2013, at 11:11.
Powered by MediaWiki
Attribution-ShareAlike 2.5
Project hosted by iFAX Solutions