Difference between revisions of "FreeBSD Start Guide"

Latest revision as of 09:27, 4 January 2016

FreeBSD Hylafax Quick Install

We need to install following ports:

print/ghostscript9-nox11
shells/bash
comms/hylafax

cd /usr/ports/print/ghostscript9-nox11
make install clean

cd /usr/ports/shells/bash 
make install clean

cd /usr/ports/comms/hylafax 
make install clean

Configuration

run hylafax setup:

/usr/local/sbin/faxsetup

run modem setup for each modem

( serial port : COM1=cuau0, COM2=cuau1 )

/usr/local/sbin/faxaddmodem

connecting whit Modem port

/etc/ttys adding line: cuau0 "/usr/local/sbin/faxgetty /dev/cuau0" dialup on

Autorun

to make sure the hylafax start with system edit /etc/rc.conf and add:

hylafax_enable="YES"

Information

config directory : /var/spool/hylafax/etc
configuration file for cuau0 modem : config.cuau0

Notes

FreeBSD 8.0 [amd64, i386] The uart(4) driver is now the default driver for serial port devices in favor of the sio(4) driver. Note that the device nodes have been renamed from /dev/cuadN and /dev/ttydN to /dev/cuauN and /dev/ttyuN.

@@ Line 1: / Line 1: @@
-==FreeBSD Hylafax quick install==
+==FreeBSD Hylafax Quick Install==
-/usr/ports/print/ghostscript-gnu-nox11
+We need to install following ports:
+*print/ghostscript9-nox11
+*shells/bash
+*comms/hylafax
+ cd /usr/ports/print/ghostscript9-nox11
   make install clean
-/usr/ports/shells/bash ( Hylafx like bash ? )
+ cd /usr/ports/shells/bash
   make install clean
-/usr/ports/comms/hylafax
+ cd /usr/ports/comms/hylafax
   make install clean
-next run hylafax setup:
+==Configuration==
+*run hylafax setup:
   /usr/local/sbin/faxsetup
-run modem setup within faxsetup or run
+*run modem setup for each modem
+( serial port : COM1=cuau0, COM2=cuau1 )
+ /usr/local/sbin/faxaddmodem
+*connecting whit Modem port
+/etc/ttys
+adding line:
+cuau0   "/usr/local/sbin/faxgetty /dev/cuau0"   dialup  on
+==Autorun==
+to make sure the hylafax start with system edit /etc/rc.conf and add:
+ hylafax_enable="YES"
-(For serial port modem connection, it should start with cuadx, while "x" is 0 or other numbers.)
- /usr/local/sbin/faxaddmodem
-You have installed and basic configured hylafax.
+==Information==
+*config directory : /var/spool/hylafax/etc <br>
+*configuration file for cuau0 modem : config.cuau0
-Config directory : /var/spool/hylafax/etc
+==Notes==
-Autostart the hylafax daemon at Freebsd
+FreeBSD 8.0 [amd64, i386] The uart(4)  driver is now the default driver for serial port devices in favor of the sio(4)  driver. Note that the device nodes have been renamed from /dev/cuadN and /dev/ttydN to /dev/cuauN and /dev/ttyuN.
- It is no need to edit /etc/rc.conf, just
-  Copy the hylafax.sh.sample to /usr/local/etc/rc.d/hylafax.sh

Personal tools