Re: [hylafax-users] Voice prompt response

[Dubba Kor <dubbakor@xxxxxxxxx>]

Thanks for your reply.

Dialing 5 is just an example, it can be any other number. Also, the faxes are sent to numbers that are generated by another program. So, I don't know which number will give a voice prompt. If there is a setting in hylafax to keep trying until it gets the fax tone, that will help I think.

DK

On Wed, Feb 2, 2011 at 5:48 PM, Chris Weiss <cweiss@xxxxxxxxx> wrote:

add a couple comma's and a 5 to the dialstring so the dialer pauses
long enough to get the prompt before it dials 5

On Wed, Feb 2, 2011 at 4:45 PM, Dubba Kor <dubbakor@xxxxxxxxx> wrote:
> Hi all, I have setup Hylafax Server to send out faxes. Everything is working
> fine, but for one number where in, when called a voice prompt responds and
> to send a fax, I will have to dial 5. Hylafax log says "Busy signal
> detected; too many attempts to dial" and is not able to send the fax and is
> failing. Is there any settings that I need to look into to make Hylafax send
> a fax in such situations?
> Here is my installation details:
> Hylafax Version: hylafax-4.4.4-1rhel5
> OS: CentOS release 5.5
> Modem: Multitech, MultiModem ZDX (MT5656ZDX)
> Thanks for your help.
> DK