Re: [hylafax-users] Sending a FAX

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

James Moe wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 01/02/2011 11:26 PM, Lee Howard wrote:
>   
> > James Moe wrote:
> >     
> > > 17:05:03 FaxGetty[8239]: OPEN /dev/ttyACM0  HylaFAX (tm) Version 6.0.4
> > > 17:05:20 FaxGetty[8239]: /dev/ttyACM0: Can not initialize modem.
> > > 17:06:55 FaxGetty[8239]: Unable to setup modem on /dev/ttyACM0; giving
> > > up after 2 attempts
> > >
> > >   What causes this? How do I fix it?
> > >       
> > Set ServerTracing in /var/spool/hylafax/etc/config.ttyACM0 to 0xFFF and
> > then restart faxgetty.  Then review the syslog again and see where it's
> > failing.
> >
> >     
>   Thanks. That gave the info I needed to get <faxgetty> to be happy with
> the modem. The flow control commands used &Ix and &Rx, neither of which
> are supported by the modem (USR 5637 USB modem).
>   

It's probably using a different chipset than expected (i.e. it's 
possibly a Conexant chipset instead of the TI derivative).

If you could run 'probemodem' against the modem and send me the output I 
would appreciate it.

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*