Re: [hylafax-users] hylafax + iaxmodem = No receiver protocol (T.30 T1 timeout)

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Kenneth "Ellis" McCall wrote:
> A couple days ago I test this out, it worked. I didn't change anything 
> with hylafax or iaxmodem. Id did change the code for the from slinear 
> to ulaw and back in my testing.
>
> Here's the log of an attempted fax:
>
> Nov 20 02:01:17.58: [ 5004]: SESSION BEGIN 000000020 18178175819751
> Nov 20 02:01:17.58: [ 5004]: HylaFAX (tm) Version 4.4.7
> Nov 20 02:01:17.58: [ 5004]: SEND FAX: JOB 9 DEST 8175819751 COMMID 
> 000000020 DEVICE '/dev/ttyIAX0' FROM 'me <me@xxxxxxxxx 
> <mailto:me@xxxxxxxxx>>' USER asterisk
> Nov 20 02:01:17.58: [ 5004]: STATE CHANGE: RUNNING -> SENDING
> Nov 20 02:01:17.58: [ 5004]: <-- [12:AT+FCLASS=1\r]
> Nov 20 02:01:17.60: [ 5004]: --> [2:OK]
> Nov 20 02:01:17.60: [ 5004]: MODEM set XON/XOFF/FLUSH: input ignored, 
> output disabled
> Nov 20 02:01:17.60: [ 5004]: DIAL 8175819751
> Nov 20 02:01:17.60: [ 5004]: <-- [15:ATDT8175819751\r]
> Nov 20 02:01:34.37: [ 5004]: --> [7:CONNECT]
> Nov 20 02:01:35.50: [ 5004]: --> HDLC<16:FF C0 04 00 00 6A AA AA 00 31 
> 09 01 71 88 77 DC>
> Nov 20 02:01:35.50: [ 5004]: --> [2:OK]
> Nov 20 02:01:35.50: [ 5004]: REMOTE NSF "00 00 56 55 55 00 8C 90 80 8E 11"
> Nov 20 02:01:35.50: [ 5004]: NSF remote fax equipment: Brother 
> MFC-3100C/MFC-8600
> Nov 20 02:01:35.50: [ 5004]: <-- [9:AT+FRH=3\r]
> Nov 20 02:01:36.00: [ 5004]: --> [7:CONNECT]
> Nov 20 02:01:36.00: [ 5004]: --> HDLC<25:FF C0 02 8C AC EC 9C 8C 1C AC 
> EC 8C 1C 04 04 04 04 04 04 04 04 04 04 BE CC>
> Nov 20 02:01:36.00: [ 5004]: --> [2:OK]
> Nov 20 02:01:36.00: [ 5004]: REMOTE CSI "8175819751"
> Nov 20 02:01:36.00: [ 5004]: <-- [9:AT+FRH=3\r]
> Nov 20 02:01:36.44: [ 5004]: --> [7:CONNECT]
> Nov 20 02:01:36.44: [ 5004]: --> HDLC<15:FF C8 01 00 77 1D 23 01 89 01 
> 01 19 00 86 BA>
> Nov 20 02:02:06.44: [ 5004]: MODEM TIMEOUT: reading line from modem
> Nov 20 02:02:06.44: [ 5004]: MODEM <Timeout>
> Nov 20 02:02:06.44: [ 5004]: <-- [9:AT+FRS=7\r]
> Nov 20 02:02:15.62: [ 5004]: --> [2:OK]
> Nov 20 02:02:15.62: [ 5004]: <-- [9:AT+FRH=3\r]
> Nov 20 02:02:17.96: [ 5004]: --> [10:NO CARRIER]
> Nov 20 02:02:17.96: [ 5004]: MODEM No carrier
> Nov 20 02:02:17.96: [ 5004]: No receiver protocol (T.30 T1 timeout)
> Nov 20 02:02:17.96: [ 5004]: SEND FAILED: JOB 9 DEST 8175819751 ERR 
> [126] No receiver protocol (T.30 T1 timeout)
> Nov 20 02:02:17.96: [ 5004]: <-- [9:AT+FRS=7\r]
> Nov 20 02:02:17.96: [ 5004]: --> [5:ERROR]

What does the Asterisk CLI say about this?  It looks like the call was 
disconnected or that some sort of crazy nonsense occurred (like a late 
fax detection rerouted the call away from iaxmodem).

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*