[hylafax-users] binding tty ports on Diva Server Analog Cards

["pasqualone@xxxxxxxxx" <pasqualone@xxxxxxxxx>]

I found this on the Eicon Diva support site:

*************************************

Diva Server Analog Cards

Binding a tty port to a particular line on a Diva Server Analog Card is a two stage process. First bind the tty port to the Diva Server Analog controller, and then to a line on the particular Diva Server Analog card. The AT command sequence to do this is

AT+iQ=aN+iK=aM

Where N is the controller number of your Diva Server Analog Card and M is the line number of the Diva Server Analog Card.

For instance if you have a V-Analog-8P card that is controller 2, and you want to bind ttyds3 to line 8 of this card, you would use the command

AT+iQ=a1+iK=a8

*************************************

Two questions

i) It seems to be a mistake on the last phrase. Maybe it would be:
For instance if you have a V-Analog-8P card that is controller 1, and 
you want to bind ttyds3 to line 8 of this card, you would use the command
AT+iQ=a1+iK=a8
in config.ttyds03

Right?

ii) If I would to use this string, where?
Ok, in config.ttydsXX but... where? For example like this:
ModemResetCmds:    AT+iQ=a1+iK=a1

is's OK?

Thanks (sorry, I'm an italian newbie)

Pasquale Buccarelli