Re: [hylafax-users] 6.0.4 install on AIX 5.3.0.0-10

["Bob Wyatt" <bwyatt_sub@xxxxxxxxxxx>]

Aidan,

I am not able to do so... HylaFAX needs to be running in production by
Monday, and I have accomplished that by copying it's pieces from a working
system, albeit an older version.

I've copied the users group in case there are still others, besides Mark and
I, that have had an issue and may wish to volunteer...

Bob
-----Original Message-----
From: Aidan Van Dyk [mailto:aidan@xxxxxxxxxxx] 
Sent: Wednesday, September 29, 2010 10:25 PM
To: Bob Wyatt
Cc: Mark Ochocki
Subject: Re: [hylafax-users] 6.0.4 install on AIX 5.3.0.0-10

Are either of you able to give remote access to an account on your AIX
box?  I'ld be happy to log in and try to get things working...

a.

On Wed, Sep 29, 2010 at 9:26 PM, Bob Wyatt <bwyatt_sub@xxxxxxxxxxx> wrote:
> Mark,
>
>
>
> I honestly gave up. I had HylaFAX-4.4.4 installed on a different AIX 5.3
> box, so I ended up cutting out the installation from that machine and
> copying it to the desired system. In so doing, I deleted all of my prior
> attempts with 6.0.4.
>
>
>
> However, I have a co-worker that believes there is a bug in faxmsg.c, but
I
> have no idea how he arrived at that conclusion.
>
>
>
> Bob
>
>
>
> From: Mark Ochocki [mailto:mjochocki@xxxxxxxxxxxxx]
> Sent: Wednesday, September 29, 2010 6:18 PM
> To: hylafax-users@xxxxxxxxxxx
> Cc: Bob Wyatt
> Subject: Re: [hylafax-users] 6.0.4 install on AIX 5.3.0.0-10
>
>
>
> Bob,
>
> I've been trying to resolve this issue for some time. If you look at your
> config.log file, I think you'll see several make errors. You can do a
search
> for 'make: *** [t] Error 1'. I'm currently trying to resolve why libutil
is
> not being found.
>
>
>
> Any hints?
>
>
>
> Mark Ochocki
>
>
>
>
>
> On Sep 28, 2010, at 2:00 AM, Bob Wyatt wrote:
>
> I have seen the prior posts regarding similar issues, with no posted
fixes?
> I am hopeful this inquiry may induce someone to provide an update? I am
> trying to install HylaFAX 6.0.4 on an AIX 5.3 system with Technology Level
> 10 installed; the configure seems to progress smoothly, but the make does
> not (see below screen scrape). I have updated make from 3.80-1, first to
> 3.80-3, then 3.82? I have tried 3 versions of the GNU GCC compiler with
> appropriate library updates (4.0.0, 4.2.0, and 4.2.4), updated glib,
> ghostscript, libpng, gettext, gawk, and libtiff.  With gcc 4.2.4, the
> configure fails, unable to find libstdc++? Don?t change anything else,
roll
> back to 4.2.0, now I can configure again but still can?t make. It doesn?t
> matter whether I set CC=gcc or CC=g++, use make 3.82, 3.80-3, or 3.80-1 -
> same behavior.
>
>
>
> Any help would be greatly appreciated?
>
>
>
> Bob
>
>
>
>
>
> $ ./configure
>
>
>
> Configuring HylaFAX (tm) (aka FlexFAX) 6.0.4.
>
>
>
> If configure does the wrong thing, check the file config.log for
>
> information that may help you understand what went wrong.
>
>
>
> Reading site-wide parameters from ./config.site.
>
> Reading cached parameters from config.cache.
>
>
>
> Using /bin/gcc for a C compiler (set CC to override).
>
> Looks like /bin/gcc supports the -g option.
>
> ... but not together with the -O option, not using it.
>
> Looks like /bin/gcc has an ANSI C preprocessor.
>
> ... but __ANSI_CPP__ is not automatically defined, will compensate.
>
> Looks like /bin/gcc supports the -M option for generating make
dependencies.
>
> Using /bin/g++ for a C++ compiler (set CXX to override).
>
> Using " -g" for C++ compiler options.
>
> Looks like /bin/g++ has an ANSI C preprocessor.
>
> ... but __ANSI_CPP__ is not automatically defined, will compensate.
>
> Using /usr/local/bin/make to configure the software.
>
> Using "include file" syntax for Makefiles.
>
> Using /bin/bash to process command scripts.
>
> Looks like the system has a CXX runtime
>
> Checking for PAM (Pluggable Authentication Module) support
>
> ... found. Enabling PAM support
>
> Checking for JBIG library support
>
> ... not found. Disabling JBIG support
>
> Checking for NLS (gettext) library support
>
> ... not found. Disabling NLS support
>
> Looks like -lbsd is needed for flock.
>
>
>
> Using previously created port.h.
>
>
>
> Checking system libraries for functionality to emulate.
>
> ... emulate mkdtemp
>
> ... emulate vsyslog
>
> Done checking system libraries.
>
>
>
> Checking ZLIB support.
>
> Using ZLIB include files from
>
> Using pre-built ZLIB library -lz
>
> Done checking ZLIB support.
>
>
>
> Checking TIFF support.
>
> Using TIFF binary files from /usr/bin
>
> Checking JBIG-in-TIFF conversion support.
>
> ./configure[3386]: 152926 Memory fault(coredump)
>
> JBIG-in-TIFF conversion support not found.
>
> Done checking TIFF support.
>
>
>
> Selecting programs used during installation and operation.
>
> Looks like /bin/nawk should be used in command scripts.
>
> Looks like /usr/sbin/sendmail should be used to deliver mail.
>
> Looks like /bin/mkfifo creates FIFO special files.
>
> Looks like /bin/ln supports the -s option to create a symbolic link.
>
> Looks like SysV init scripts go in /etc/rc.d/init.d.
>
> Done selecting programs.
>
>
>
> Selecting default HylaFAX configuration parameters.
>
>
>
> Using uid uucp and gid uucp for controlling access to fax stuff.
>
> Using uid bin and gid sys for installing programs.
>
> Using MSB2LSB bit order for your powerpc cpu.
>
> Looks like you need SysV getty support.
>
> Using /etc/getty as the program to exec for a data call.
>
> Using /bin/vgetty as the program to exec for a voice call.
>
> Using /bin/egetty as the program to exec for an extern call.
>
> Looks like you use ascii-style UUCP lock files.
>
> Looks like UUCP lock files go in /etc/locks.
>
> Looks like the gs imager package should be used.
>
> Looks like /usr/bin/gs is the PostScript RIP to use.
>
> Setting the Fontmap path to
> /opt/freeware/share/ghostscript/5.50:/opt/freeware/share/ghostscript/fonts
>
> Looks like font metric information goes in
>
/opt/freeware/share/ghostscript/5.50:/opt/freeware/share/ghostscript/fonts.
>
> Looks like manual pages go in /usr/local/man.
>
> Looks like manual pages should be installed with sysv-source-strip.
>
> Press Return to Continue
>
>
>
>
>
> HylaFAX configuration parameters (part 1 of 2) are:
>
>
>
> [ 1] Directory for applications:        /usr/local/bin
>
> [ 2] Directory for lib data files:      /usr/local/lib/fax
>
> [ 3] Directory for lib executables:     /usr/local/sbin
>
> [ 4] Directory for system apps:         /usr/local/sbin
>
> [ 5] Directory for manual pages:        /usr/local/man
>
> [ 7] Directory for spooling:            /var/spool/hylafax
>
> [ 8] Directory for uucp lock files:     /etc/locks
>
> [ 9] Uucp lock file scheme:             ascii
>
> [10] PostScript imager package:         gs
>
> [11] PostScript imager program:         /usr/bin/gs
>
> [12] Manual page installation scheme:   sysv-source-strip
>
> [13] Default page size:                 North American Letter
>
> [14] Default vertical res (lpi):        98
>
>
>
> Are these ok [yes]?
>
>
>
> HylaFAX configuration parameters (part 2 of 2) are:
>
>
>
> [15] Location of getty program:         /etc/getty
>
> [16] Location of voice getty program:   /bin/vgetty
>
> [17] Location of sendmail program:      /usr/sbin/sendmail
>
> [18] Location of TIFF tools:            /usr/bin
>
> [19] Location of SysV init scripts:     /etc/rc.d/init.d
>
> [20] Location of SysV start scripts:    ../rc2.d
>
> [21] Location of SysV stop scripts:     ../rc0.d
>
> [22] Name of SysV start script:         S80hylafax
>
> [23] Name of SysV stop script:          K05hylafax
>
> [24] Init script starts faxq:           yes
>
> [25] Init script starts hfaxd           yes
>
> [26] Start paging protocol:             no
>
> Are these ok [yes]?
>
>
>
> Creating defs from ./defs.in
>
> Creating rules from ./rules.in
>
> Creating Makefile from ./Makefile.in
>
> Creating config/Makefile from ./config/Makefile.in
>
> Creating etc/Makefile from ./etc/Makefile.in
>
> Creating faxalter/Makefile from ./faxalter/Makefile.in
>
> Creating faxcover/Makefile from ./faxcover/Makefile.in
>
> Creating faxd/Makefile from ./faxd/Makefile.in
>
> Creating faxmail/Makefile from ./faxmail/Makefile.in
>
> Creating faxrm/Makefile from ./faxrm/Makefile.in
>
> Creating faxstat/Makefile from ./faxstat/Makefile.in
>
> Creating hfaxd/Makefile from ./hfaxd/Makefile.in
>
> Creating libhylafax/Makefile from ./libhylafax/Makefile.in
>
> Creating man/Makefile from ./man/Makefile.in
>
> Creating sendfax/Makefile from ./sendfax/Makefile.in
>
> Creating sendpage/Makefile from ./sendpage/Makefile.in
>
> Creating util/Makefile from ./util/Makefile.in
>
> Creating port/Makefile from ./port/Makefile.in
>
> Creating port/install.sh from ./port/install.sh.in
>
> Creating port/version.c from ./port/version.c.in
>
> Creating libhylafax/pagesizes from ./libhylafax/pagesizes.in
>
> Creating etc/faxsetup.sh from ./etc/faxsetup.sh.in
>
> Creating etc/faxaddmodem.sh from ./etc/faxaddmodem.sh.in
>
> Creating etc/probemodem.sh from ./etc/probemodem.sh.in
>
> Creating etc/hylafax from ./etc/hylafax.in
>
> Creating faxcover/edit-faxcover.sh from ./faxcover/edit-faxcover.sh.in
>
> Creating util/xferfaxstats.sh from ./util/xferfaxstats.sh.in
>
> Creating util/recvstats.sh from ./util/recvstats.sh.in
>
> Creating util/faxcron.sh from ./util/faxcron.sh.in
>
> Creating util/archive.sh from ./util/archive.sh.in
>
> Creating util/dictionary.sh from ./util/dictionary.sh.in
>
> Creating util/common-functions.sh from ./util/common-functions.sh.in
>
> Creating util/faxrcvd.sh from ./util/faxrcvd.sh.in
>
> Creating util/mkcover.sh from ./util/mkcover.sh.in
>
> Creating util/notify.sh from ./util/notify.sh.in
>
> Creating util/notify-4.1.sh from ./util/notify-4.1.sh.in
>
> Creating util/notify-4.2.sh from ./util/notify-4.2.sh.in
>
> Creating util/pcl2fax.sh from ./util/pcl2fax.sh.in
>
> Creating util/pollrcvd.sh from ./util/pollrcvd.sh.in
>
> Creating util/ps2fax.dps.sh from ./util/ps2fax.dps.sh.in
>
> Creating util/ps2fax.gs.sh from ./util/ps2fax.gs.sh.in
>
> Creating util/pdf2fax.gs.sh from ./util/pdf2fax.gs.sh.in
>
> Creating util/ps2fax.imp.sh from ./util/ps2fax.imp.sh.in
>
> Creating util/tiff2fax.sh from ./util/tiff2fax.sh.in
>
> Creating util/wedged.sh from ./util/wedged.sh.in
>
> Creating util/tiff2pdf.sh from ./util/tiff2pdf.sh.in
>
> Creating pkg/Makefile from ./pkg/Makefile.in
>
> Creating pkg/cpkginfo from ./pkg/cpkginfo.in
>
> Creating pkg/cproto.stub from ./pkg/cproto.stub.in
>
> Creating pkg/crequest from ./pkg/crequest.in
>
> Creating pkg/make_proto.sh from ./pkg/make_proto.sh.in
>
> Creating pkg/postinstall from ./pkg/postinstall.in
>
> Creating pkg/postremove from ./pkg/postremove.in
>
> Creating pkg/spkginfo from ./pkg/spkginfo.in
>
> Creating pkg/sproto.stub from ./pkg/sproto.stub.in
>
> Creating pkg/srequest from ./pkg/srequest.in
>
> Creating port/mkdepend from ./port/mkdepend.in
>
> Creating regex/Makefile from ./regex/Makefile.in
>
> Setting up make dependency files.
>
> Done.
>
> $ make check
>
> make: 1254-002 Cannot find a rule to create target check from
dependencies.
>
> Stop.
>
> $ make
>
>         /bin/echo "= "port; cd port; make  ||  exit ;
>
> = port
>
> /bin/bash ../port/mkdepend   -e 's@ /usr/include/@ /@' -c /bin/gcc
> -D__ANSI_CPP__ -I. -I.. -I.././port -I.././libhylafax -I.././rege
>
> x -O -c -M  -i Makedepend version.c
>
> Target "_quiet.cdependtime" is up to date.
>
>         /bin/gcc        -D__ANSI_CPP__ -I. -I.. -I.././port
> -I.././libhylafax -I.././regex   -O  -c version.c
>
>         /bin/ar rc libport.a  mkdtemp.o vsyslog.o version.o
>
>         /bin/ranlib libport.a
>
> Target "targets" is up to date.
>
> Target "_quiet.cdependtime" is up to date.
>
> Target "targets" is up to date.
>
> = regex
>
> Target "_quiet.cdependtime" is up to date.
>
> Target "targets" is up to date.
>
> Target "_quiet.cdependtime" is up to date.
>
> Target "targets" is up to date.
>
> = libhylafax
>
> Target "_quiet.c++dependtime" is up to date.
>
> Target "_quiet.cdependtime" is up to date.
>
> Target "targets" is up to date.
>
> Target "_quiet.c++dependtime" is up to date.
>
> Target "_quiet.cdependtime" is up to date.
>
> Target "targets" is up to date.
>
> = util
>
> Target "_quiet.c++dependtime" is up to date.
>
> Target "_quiet.cdependtime" is up to date.
>
>         /bin/gcc        -D__ANSI_CPP__ -I. -I.. -I.././util
> -I.././libhylafax -I.././regex   -O  -o faxmsg .././util/faxmsg.c     -
>
> L../libhylafax -lhylafax-6.0  -ltiff  -lz -L../regex -lregex
> ../port/libport.a -lbsd
>
> ld: 0711-317 ERROR: Undefined symbol: vtable for
> __cxxabiv1::__class_type_info
>
> ld: 0711-317 ERROR: Undefined symbol: __gxx_personality_v0
>
> ld: 0711-317 ERROR: Undefined symbol: .operator delete(void*)
>
> ld: 0711-317 ERROR: Undefined symbol: __cxa_pure_virtual
>
> ld: 0711-317 ERROR: Undefined symbol: vtable for
> __cxxabiv1::__si_class_type_info
>
> ld: 0711-317 ERROR: Undefined symbol: .operator new(unsigned long)
>
> ld: 0711-317 ERROR: Undefined symbol: .operator new[](unsigned long)
>
> ld: 0711-317 ERROR: Undefined symbol: .operator delete[](void*)
>
> ld: 0711-317 ERROR: Undefined symbol: .__cxa_guard_acquire
>
> ld: 0711-317 ERROR: Undefined symbol: .__cxa_guard_release
>
> ld: 0711-317 ERROR: Undefined symbol: .__cxa_guard_abort
>
> ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more
> information.
>
> collect2: ld returned 8 exit status
>
> make: 1254-004 The error code from the last command is 1.
>
>
>
>
>
> Stop.
>
> make: 1254-004 The error code from the last command is 2.
>
>
>
>
>
> Stop.
>
> make: 1254-004 The error code from the last command is 2.
>
>
>
>
>
> Stop.
>
> make: 1254-004 The error code from the last command is 2.
>
>
>
>
>
> Stop.
>
>
>
>
>
>


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*