Re: [hylafax-users] Faxstat can not reach service hylafax

[John Rowan <rowan@xxxxxxxxxxxx>]

 Having run faxsetup /dev/ttyS0 and entering all info all over again it 
finished by running faxmodem /dev/ttyS0
Now faxstat communicates.  Was this all caused by faxmodem not starting???


On 9/10/2010 1:38 PM, Giuseppe Sacco wrote:
> The problem displayed in your setup is that hfaxd doesn't listen on any
> TCP port. I don't know how this might happens, but lsof does show this
> behaviour.
>
> I did ask you to issue this command, but I couldn't find if you did it:
>
> # getent services hylafax
> hylafax               4559/tcp
>
> As you can see, on my system, the "hylafax" port is tcp/4559, so I
> wonder what is that settings in your system.
>
> Still, whatever port it "hylafax" is, hfaxd does not bind to any port,
> so it could be worth to better check what it does.
>
> Could you also issue this command while hylafax is stopped?
>
> # /usr/sbin/hfaxd -i hylafax -d
>
> does it show any error? Does faxstat work when hfaxd is started this
> way? Does it change if run the hfaxd command as user "uucp"?
>
> And, could you post any customizations you might have done
> in /var/spool/hylafax/etc/hfaxd.conf ? Do you have any LogFacility and
> ServerTracing settings in that file? Could you check what logging was
> done by hfaxd according to these settings? Could you increase
> ServerTracing and try again?
>
> Bye,
> Giuseppe
>
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>    To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>   On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx<  /dev/null
>    *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


begin:vcard
fn:John Rowan
n:Rowan;John
email;internet:rowan@xxxxxxxxxxxx
tel;work:(973) 229-5742
tel;fax:(973) 697-4443
version:2.1
end:vcard