 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] T.30 T2 timeout, expected signal not received
- To: <hylafax-users@xxxxxxxxxxx>
- Subject: [hylafax-users] T.30 T2 timeout, expected signal not received
- From: "MOLLE Thomas" <t.molle@xxxxxxxxxxx>
- Date: Tue, 7 Sep 2010 15:30:52 +0200
Hi, I have a problem in my logs... Sometimes, I can see the following error : sep 01 05:18:34.05: [ 1540]: RECV FAX: T.30 T2 timeout, expected signal not received sep 01 05:18:34.05: [ 1540]: RECV FAX (000014127): session with <UNSPECIFIED> terminated abnormally: T.30 T2 timeout, expected signal not received sep 01 05:18:34.05: [ 1540]: RECV FAX: bin/faxrcvd "recvq/fax000014192.tif" "ttyds03" "000014127" "T.30 T2 timeout, expected signal not received" "7331" "00XXXXXXX7100" sep 01 05:18:34.05: [ 1540]: T.30 T2 timeout, expected signal not received I'm trying to understand why I lose the signal. Where is the cause? My modem? (bad configuration?) Namely that I have this problem only from two countries : Romania and Poland. (The server is located in France) Maybe the distance is involved. Have I a timeout somewhere in Hylafax configuration that I could edit? Thanks in advance for your help Thomas ------------------------------------------------------------------------ -------------------------------- Full session : sep 01 05:18:13.76: [ 1540]: SESSION BEGIN 000014127 33XXXXXXXXX sep 01 05:18:13.76: [ 1540]: HylaFAX (tm) Version 4.4.4 sep 01 05:18:13.76: [ 1540]: CallID: "7331" "00402XXXXXXXX" sep 01 05:18:13.76: [ 1540]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled sep 01 05:18:13.76: [ 1540]: <-- [4:ATA\r] sep 01 05:18:18.80: [ 1540]: --> [7:CONNECT] sep 01 05:18:18.80: [ 1540]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyds03' sep 01 05:18:18.80: [ 1540]: STATE CHANGE: ANSWERING -> RECEIVING sep 01 05:18:18.80: [ 1540]: RECV FAX: begin sep 01 05:18:18.80: [ 1540]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 2C 74 2C> sep 01 05:18:18.80: [ 1540]: <-- data [32] sep 01 05:18:18.80: [ 1540]: <-- data [2] sep 01 05:18:19.75: [ 1540]: --> [7:CONNECT] sep 01 05:18:19.75: [ 1540]: <-- HDLC<23:FF C0 02 4E A6 6E 4E A6 CA 04 86 6E 96 22 B4 04 1E 86 62 86 36 9E 12> sep 01 05:18:19.75: [ 1540]: <-- data [23] sep 01 05:18:19.75: [ 1540]: <-- data [2] sep 01 05:18:20.47: [ 1540]: --> [7:CONNECT] sep 01 05:18:20.47: [ 1540]: <-- HDLC<13:FF C8 01 00 77 5F 23 01 FB C1 01 01 18> sep 01 05:18:20.47: [ 1540]: <-- data [13] sep 01 05:18:20.47: [ 1540]: <-- data [2] sep 01 05:18:21.88: [ 1540]: --> [2:OK] sep 01 05:18:21.88: [ 1540]: <-- [9:AT+FRH=3\r] sep 01 05:18:22.30: [ 1540]: --> [7:CONNECT] sep 01 05:18:22.62: [ 1540]: --> HDLC<9:FF C8 C1 00 44 0F 22 54 A8> sep 01 05:18:22.62: [ 1540]: --> [2:OK] sep 01 05:18:22.62: [ 1540]: REMOTE wants 14400 bit/s sep 01 05:18:22.62: [ 1540]: REMOTE wants A4 page width (215 mm) sep 01 05:18:22.62: [ 1540]: REMOTE wants A4 page length (297 mm) sep 01 05:18:22.62: [ 1540]: REMOTE wants 3.85 line/mm sep 01 05:18:22.62: [ 1540]: REMOTE wants 2-D MMR sep 01 05:18:22.62: [ 1540]: REMOTE wants T.30 Annex A, 256-byte ECM sep 01 05:18:22.62: [ 1540]: RECV recv DCS (command signal) sep 01 05:18:22.62: [ 1540]: RECV training at v.17 14400 bit/s sep 01 05:18:22.62: [ 1540]: MODEM set XON/XOFF/DRAIN: input ignored, output generated sep 01 05:18:22.62: [ 1540]: <-- [11:AT+FRM=145\r] sep 01 05:18:24.42: [ 1540]: --> [7:CONNECT] sep 01 05:18:25.99: [ 1540]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled sep 01 05:18:25.99: [ 1540]: RECV: TCF 2828 bytes, 1% non-zero, 2771 zero-run sep 01 05:18:25.99: [ 1540]: --> [10:NO CARRIER] sep 01 05:18:25.99: [ 1540]: <-- [9:AT+FRS=7\r] sep 01 05:18:25.99: [ 1540]: --> [2:OK] sep 01 05:18:25.99: [ 1540]: TRAINING succeeded sep 01 05:18:25.99: [ 1540]: <-- [9:AT+FTH=3\r] sep 01 05:18:26.07: [ 1540]: --> [7:CONNECT] sep 01 05:18:26.07: [ 1540]: <-- HDLC<3:FF C8 21> sep 01 05:18:26.07: [ 1540]: <-- data [3] sep 01 05:18:26.07: [ 1540]: <-- data [2] sep 01 05:18:27.24: [ 1540]: --> [2:OK] sep 01 05:18:27.24: [ 1540]: <-- [11:AT+FRM=146\r] sep 01 05:18:28.33: [ 1540]: --> [7:CONNECT] sep 01 05:18:28.33: [ 1540]: MODEM input buffering enabled sep 01 05:18:28.34: [ 1540]: MODEM set XON/XOFF/FLUSH: input ignored, output generated sep 01 05:18:31.75: [ 1540]: RECV received RCP frame sep 01 05:18:31.75: [ 1540]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled sep 01 05:18:31.75: [ 1540]: MODEM input buffering disabled sep 01 05:18:31.75: [ 1540]: --> [10:NO CARRIER] sep 01 05:18:31.75: [ 1540]: <-- [9:AT+FRH=3\r] sep 01 05:18:31.86: [ 1540]: --> [7:CONNECT] sep 01 05:18:32.10: [ 1540]: --> [2:10 03] sep 01 05:18:32.10: [ 1540]: --> [5:ERROR] sep 01 05:18:32.10: [ 1540]: MODEM Command error sep 01 05:18:32.10: [ 1540]: FCS error sep 01 05:18:32.10: [ 1540]: <-- [10:AT+FRS=21\r] sep 01 05:18:32.10: [ 1540]: --> [2:OK] sep 01 05:18:32.10: [ 1540]: <-- [9:AT+FTH=3\r] sep 01 05:18:32.18: [ 1540]: --> [7:CONNECT] sep 01 05:18:32.18: [ 1540]: <-- HDLC<3:FF C8 58> sep 01 05:18:32.18: [ 1540]: <-- data [3] sep 01 05:18:32.18: [ 1540]: <-- data [2] sep 01 05:18:33.34: [ 1540]: --> [2:OK] sep 01 05:18:33.34: [ 1540]: RECV send CRP (command repeat) sep 01 05:18:33.34: [ 1540]: <-- [9:AT+FRH=3\r] sep 01 05:18:34.05: [ 1540]: --> [2:] sep 01 05:18:34.05: [ 1540]: --> [10:NO CARRIER] sep 01 05:18:34.05: [ 1540]: MODEM No carrier sep 01 05:18:34.05: [ 1540]: <-- [9:AT+FRH=3\r] sep 01 05:18:34.05: [ 1540]: --> [5:ERROR] sep 01 05:18:34.05: [ 1540]: MODEM Command error sep 01 05:18:34.05: [ 1540]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled sep 01 05:18:34.05: [ 1540]: RECV FAX: T.30 T2 timeout, expected signal not received sep 01 05:18:34.05: [ 1540]: MODEM input buffering enabled sep 01 05:18:34.05: [ 1540]: RECV FAX (000014127): session with <UNSPECIFIED> terminated abnormally: T.30 T2 timeout, expected signal not received sep 01 05:18:34.05: [ 1540]: RECV FAX: bin/faxrcvd "recvq/fax000014192.tif" "ttyds03" "000014127" "T.30 T2 timeout, expected signal not received" "7331" "00402XXXXXXX" sep 01 05:18:34.05: [ 1540]: RECV FAX (000014127): recvq/fax000014192.tif from <UNSPECIFIED>, route to <unspecified>, 0 pages in 0:16 sep 01 05:18:34.05: [ 1540]: RECV FAX: end sep 01 05:18:34.05: [ 1540]: T.30 T2 timeout, expected signal not received sep 01 05:18:34.05: [ 1540]: SESSION END ------------------------------------------------------------------------ -------------------------------- ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- Follow-Ups:
- Re: [hylafax-users] T.30 T2 timeout, expected signal not received
- From: Lee Howard
- Re: [hylafax-users] T.30 T2 timeout, expected signal not received
- Prev by Date: Re: [hylafax-users] Faxstat can not reach service hylafax
- Next by Date: [hylafax-users] khalid
- Previous by thread: [hylafax-users] Fw: khalid
- Next by thread: Re: [hylafax-users] T.30 T2 timeout, expected signal not received
- Index(es):
Project hosted by iFAX Solutions