[hylafax-users] Trixbox & Hylafax fax no dial tone

[zeynep yildirim <zyildirim@xxxxxxxxx>]

Hi All,

I installed Hylfax and avantfax on Trixbox. I used this manual http://trixbox.org/wiki/avantfax-hylafax-iaxmodem-tb-faxing-web-interface 
.

I did step by step this manual. Now my problem is that i call my fax  
number, I hear dial tone but no fax signal. Can you help me please.

I use digium fxo (4 ports ) card for pstns. My zapata.conf likes this:
[channels]
language=en

; include zap extensions defined in AMP
#include zapata_additional.conf

; XTDM20B Port #1,2 plugged into PSTN
;AMPLABEL:Channel %c - Button %n
context=from-pstn
signalling=fxs_ks
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
group=0
channel=1-4
allow=ulaw
faxdetect=both
;faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no

extentions.conf file:

[ext-fax]
exten => s,1,Answer
exten => s,2,Goto(in_fax,1)
exten => in_fax,1,StopPlayTones
exten => in_fax,2,GotoIf($["${FAX_RX}" = "system"]?3:analog_fax,1)
exten => in_fax,3,Macro(faxreceive)
exten => in_fax,4,Hangup
exten => analog_fax,1,GotoIf($["${FAX_RX}" = "disabled"]?4:2)  ;if fax  
is disabled, just hang up
exten => analog_fax,2,Set(DIAL=${DB(DEVICE/${FAX_RX}/dial)});
exten => analog_fax,3,Dial(${DIAL},20,d)
exten => analog_fax,4,Hangup
;exten => out_fax,1,wait(7)
exten => out_fax,1,txfax(${TXFAX_NAME},caller)
exten => out_fax,2,Hangup
exten => h,1,system(/var/lib/asterisk/bin/fax-process.pl --to $ 
{EMAILADDR} --from ${FAX_RX_FROM} --dest "${FROM_DID}" --subject "Fax  
from ${URIENCODE(${CALLERID(number)})} ${URIENCODE(${CALLERID 
(name)})}" --attachment fax_${URIENCODE(${CALLERID(number)})}.pdf -- 
type application/pdf --file ${FAXFILE});
exten => h,2,Hangup()


my soft modem extentions:

inbound Route: