[hylafax-users] Fwd: Trixbox & Hylafax fax no dial tone

[zeynep yildirim <zyildirim@xxxxxxxxx>]

> Hi All,
>
> I installed Hylfax and avantfax on Trixbox. I used this manual http://trixbox.org/wiki/avantfax-hylafax-iaxmodem-tb-faxing-web-interface 
> .
>
> I did step by step this manual. Now my problem is that i call my fax  
> number, I hear dial tone but no fax signal. Can you help me please.
>
> I use digium fxo (4 ports ) card for pstns. My zapata.conf likes this:
> [channels]
> language=en
>
> ; include zap extensions defined in AMP
> #include zapata_additional.conf
>
> ; XTDM20B Port #1,2 plugged into PSTN
> ;AMPLABEL:Channel %c - Button %n
> context=from-pstn
> signalling=fxs_ks
> faxdetect=incoming
> usecallerid=yes
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=800
> group=0
> channel=1-4
> allow=ulaw
> faxdetect=both
> ;faxdetect=incoming
> ;faxdetect=outgoing
> ;faxdetect=no
>
> extentions.conf file:
>
> [ext-fax]
> exten => s,1,Answer
> exten => s,2,Goto(in_fax,1)
> exten => in_fax,1,StopPlayTones
> exten => in_fax,2,GotoIf($["${FAX_RX}" = "system"]?3:analog_fax,1)
> exten => in_fax,3,Macro(faxreceive)
> exten => in_fax,4,Hangup
> exten => analog_fax,1,GotoIf($["${FAX_RX}" = "disabled"]?4:2)  ;if  
> fax is disabled, just hang up
> exten => analog_fax,2,Set(DIAL=${DB(DEVICE/${FAX_RX}/dial)});
> exten => analog_fax,3,Dial(${DIAL},20,d)
> exten => analog_fax,4,Hangup
> ;exten => out_fax,1,wait(7)
> exten => out_fax,1,txfax(${TXFAX_NAME},caller)
> exten => out_fax,2,Hangup
> exten => h,1,system(/var/lib/asterisk/bin/fax-process.pl --to $ 
> {EMAILADDR} --from ${FAX_RX_FROM} --dest "${FROM_DID}" --subject  
> "Fax from ${URIENCODE(${CALLERID(number)})} ${URIENCODE(${CALLERID 
> (name)})}" --attachment fax_${URIENCODE(${CALLERID(number)})}.pdf -- 
> type application/pdf --file ${FAXFILE});
> exten => h,2,Hangup()
>
>
> my soft modem extentions:

> inbound Route:

>