Re: [hylafax-users] This one destination gets every fax twice.

[Eliran Itzhak <elirani@xxxxxxxxx>]

Thanks for checking that log file.
About upgrading, should I upgrade to HylaFax+, or to the regular Hylafax ? If I remember correctly, the version I'm using now is HylaFax+ ?

I've made extensive changes, especially to bin/notify, but to some other files as well, So I want to upgrade to a similar version.

Regards,

Eliran.

2010/3/29 Lee Howard <faxguy@xxxxxxxxxxxxxxxx>

Eliran Itzhak wrote:

Mar 24 23:06:13.25: [31021]: HylaFAX (tm) Version 5.1.8

I don't know if it will solve the problem, but upgrading would be a good idea.

Mar 24 23:06:55.43: [31021]: <-- [9:AT+FTH=3\r]
Mar 24 23:06:55.61: [31021]: --> [7:CONNECT]
Mar 24 23:06:55.61: [31021]: <-- data [7]
Mar 24 23:06:55.61: [31021]: <-- data [2]
Mar 24 23:06:56.90: [31021]: --> [2:OK]
Mar 24 23:06:56.90: [31021]: SEND send PPS (partial page signal)
Mar 24 23:06:56.90: [31021]: SEND send EOP (no more pages or documents)
Mar 24 23:06:56.90: [31021]: <-- [9:AT+FRH=3\r]
Mar 24 23:06:57.50: [31021]: --> [10:NO CARRIER]
Mar 24 23:06:57.50: [31021]: MODEM No carrier
Mar 24 23:06:57.50: [31021]: No response to PPS repeated 3 times. {E147}

The receiver did not respond to the end-of-page / partial-page signal.  So there's no way to know if it was received by the receiver or not.  It will have to get resent.

Thanks,

Lee.