HylaFAX The world's most advanced open source fax server |
Hi, Im currently trying to set up Hylafax with
t38modem on a Debian Lenny VM. The problem I have it that hylafax won’t
pick up the phone when it rings with “faxanswer ttyv1” for a test,
neither will it answer the modem as I added it with addfaxmodem. T38modem output when I call (* = I hid the
numbers manually): From: 04**00*** To: 9922 Closing
connection We get the line on t38modem from a Cisco callmanager,
so we only get the internal number on the to number and we get a 0 before the from
number. Here is how I run t38modem: t38modem -F -n
-p ttyv1 --route all@xxxxxxxxx Here is config.ttyv1 from hylafax: # $Id:
t38modem,v 1.2 2005/02/14 13:56:27 lhoward Exp $ # # HylaFAX
configuration for a T38FAX Pseudo Modem # # This file was
originally sourced with permission from # Vyacheslav
Frolov's t38modem software in OpenH323 package. # # FAXNumber:
9922 DialStringRules:
etc/dialrules ServerTracing:
1 SessionTracing:
11 RecvFileMode:
0600 LogFileMode:
0600 DeviceMode:
0600 RingsBeforeAnswer:
1 SpeakerVolume:
off GettyArgs:
"-h %l dx_%s" LocalIdentifier:
ISDN1 TagLineFont:
etc/lutRS18.pcf TagLineFormat:
"From %%l|%c|Page %%P of %%T" MaxRecvPages:
100 ModemType:
Class1 # use class 1 interface ModemFlowControl:
rtscts # default ModemRevQueryCmd:
AT+FREV? Class1FrameOverhead:
2 # does not include FCS Here is my config.sav: #ContCoverPage:
"etc/cover.templ" #DestControls:
"etc/destctrls" #DialStringRules:
"etc/dialrules" #QualifyCID:
"etc/cid" #QualifyTSI:
"etc/tsi" #ServerTracing:
0x08501 #InternationalPrefix:
00 Everything is installed with “aptitude
install t38modem hylafax-server hylafax-client”. _____________________________________________________ Patrick
Kvaksrud Lærling
i IKT-driftsfaget Norges
idrettsforbund og olympiske og paralympiske komité |