Re: [hylafax-users] ERR [124] COMREC error

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

faxmaster wrote:
> mar 13 12:25:55.26: [ 1480]: <-- [20:ATX3DT0033147600xxx\r]
>
> mar 13 12:26:11.94: [ 1480]: --> [7:CONNECT]
>
> mar 13 12:26:42.10: [ 1480]: MODEM <Timeout>
>
> mar 13 12:26:42.10: [ 1480]: DELAY 70 ms

The number is dialed, the modem detects fax tones, but after detecting 
fax tones the modem doesn't deliver the HDLC data detected in the fax 
tones for at least 30 seconds.  So HylaFAX attempts to recover from this 
by having the modem listen again...

> mar 13 12:26:42.17: [ 1480]: <-- [9:AT+FRH=3\r]
>
> mar 13 12:26:42.32: [ 1480]: --> [7:CONNECT]
>
> mar 13 12:26:42.62: [ 1480]: --> [2:OK]
>
> mar 13 12:26:42.62: [ 1480]: COMREC error in transmit Phase B/got DCN

... but by this time the signal that is detected is DCN (disconnect).  
So the 30 seconds was too long to wait for recovery to be possible.

What kind of modem is being used?  What version of HylaFAX?

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*