HylaFAX The world's most advanced open source fax server
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] hylafax-4.4.4-1rhel3 and US Robotics 56 EXT faxmodem model 5631

Dear List,

I'veg to CentOS 3.9
A US Robotics 56K Ext Faxmodem (model 5631) on /dev/ttyS0
I've got hylafax-4.4.4-1rhel3



I can send faxes to our internal fax machine without problems, it arives every time.


My config for the modem looks like this :

# $Id: class1,v 1.18 2007/03/14 18:24:10 aidan Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#

#
# Generic Class 1 modem configuration.
#
# EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP
#
CountryCode: 381
AreaCode: 24
FAXNumber: +38124715898
LongDistancePrefix: 0
InternationalPrefix: 99
DialStringRules: etc/dialrules
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "CaprioloBIKE d.o.o."
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
PercentGoodLines: 0
MaxConsecutiveBadLines: 0
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class1 # use this to supply a hint
#ModemRate: 19200 # rate for DCE-DTE communication
#ModemFlowControl: xonxoff # XON/XOFF flow control assumed
#
#ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
#ModemSetupDCDCmd: AT&C1 # setup so DCD follows carrier
#GettyArgs: "-h %l dx_%s" # modem must auto-detect fax/data
#
# We can append the "@" symbol to the dial string so that
# the modem will wait 5 seconds before attempting to connect
# and return result codes that distinguish between no carrier
# and no answer. This makes it possible to avoid problems with
# repeatedly dialing a number that doesn't have a fax machine
# (kudos to Stuart Lynne for this trick.)
#
# NB: If you need to prefix phone numbers to get through a PBX,
# put it in the ModemDialCmd; e.g. "DT9%s@".
#
#ModemDialCmd: ATDT%s # T for tone dialing
#
# Other possible configuration stuff. The default strings are
# shown below. Only those that are different from the defaults
# need to be included in the configuration file.
#
#ModemResetCmds: "" # stuff to do when modem is reset
#ModemAnswerCmd: ATA # use this to answer phone
#ModemNoFlowCmd: AT&K # disable flow control cmd
#ModemHardFlowCmd: AT&K3 # hardware flow control cmd
#ModemSoftFlowCmd: AT&K4 # software flow control cmd
#ModemNoAutoAnswerCmd: ATS0=0 # disable auto-answer
#
# Set modem speaker volume commands: OFF QUIET LOW MEDIUM HIGH.
# Note that we both turn the speaker on/off and set volume.
#
#ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
#ModemEchoOffCmd: ATE0 # disable command echo
#ModemVerboseResultsCmd: ATV1 # enable verbose command results
#ModemResultCodesCmd: ATQ0 # enable result codes
#ModemOnHookCmd: ATH0 # place phone on hook (hangup)
#ModemSoftResetCmd: ATZ # do soft reset of modem
#ModemSoftResetCmdDelay: 3000 # pause after soft reset
#ModemWaitTimeCmd: ATS7=60 # wait 60 seconds for carrier
#ModemCommaPauseTimeCmd: ATS8=2 # comma pause time is 2 seconds
#ModemRecvFillOrder: LSB2MSB # bit order of received facsimile
#ModemSendFillOrder: LSB2MSB # bit order modem expects for transmit
#
Class1Cmd: AT+FCLASS=1 # command to enter class 1
Class1PPMWaitCmd: AT+FTS=7 # command to stop and wait before PPM
Class1TCFWaitCmd: AT+FTS=7 # command to stop and wait before TCF
Class1EOPWaitCmd: AT+FTS=9 # command to stop and wait before EOP
Class1SwitchingCmd: AT+FRS=7 # silence between HDLC recv and trans
Class1RecvAbortOK: 200 # wait 200ms for abort response
Class1FrameOverhead: 4 # 4 byte overhead in recvd HDLC frames
Class1RecvIdentTimer: 40000 # 35+5secs waiting for ident frames
Class1TCFMaxNonZero: 10 # max 10% of data may be non-zero
Class1TCFMinRun: 1000 # min run is 2/3rds of TCF duration

The error I'm getting :

Feb 25 14:39:42.34: [ 1248]: <-- data [2]
Feb 25 14:39:43.17: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:43.17: [ 1248]: <-- data [13]
Feb 25 14:39:43.17: [ 1248]: <-- data [2]
Feb 25 14:39:43.80: [ 1248]: --> [2:OK]
Feb 25 14:39:43.80: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:39:44.39: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:45.81: [ 1248]: --> [2:OK]
Feb 25 14:39:45.81: [ 1248]: RECV recv NSF (non-standard facilities)
Feb 25 14:39:45.81: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:39:45.86: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:46.21: [ 1248]: --> [2:OK]
Feb 25 14:39:46.21: [ 1248]: RECV recv DIS (identification signal)
Feb 25 14:39:46.21: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:39:46.26: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:46.32: [ 1248]: --> [5:ERROR]
Feb 25 14:39:46.32: [ 1248]: MODEM Command error
Feb 25 14:39:46.32: [ 1248]: FCS error
Feb 25 14:39:46.32: [ 1248]: <-- [10:AT+FRS=21\r]
Feb 25 14:39:46.61: [ 1248]: --> [2:OK]
Feb 25 14:39:46.61: [ 1248]: <-- [9:AT+FTH=3\r]
Feb 25 14:39:46.69: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:46.69: [ 1248]: <-- data [3]
Feb 25 14:39:46.69: [ 1248]: <-- data [2]
Feb 25 14:39:47.99: [ 1248]: --> [2:OK]
Feb 25 14:39:47.99: [ 1248]: RECV send CRP (command repeat)
Feb 25 14:39:47.99: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:39:48.41: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:49.64: [ 1248]: --> [2:OK]
Feb 25 14:39:49.64: [ 1248]: RECV recv NSF (non-standard facilities)
Feb 25 14:39:49.64: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:39:49.70: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:50.01: [ 1248]: --> [2:OK]
Feb 25 14:39:50.01: [ 1248]: RECV recv DIS (identification signal)
Feb 25 14:39:50.01: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:39:50.07: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:50.13: [ 1248]: --> [5:ERROR]
Feb 25 14:39:50.13: [ 1248]: MODEM Command error
Feb 25 14:39:50.13: [ 1248]: FCS error
Feb 25 14:39:50.13: [ 1248]: <-- [10:AT+FRS=21\r]
Feb 25 14:39:50.42: [ 1248]: --> [2:OK]
Feb 25 14:39:50.42: [ 1248]: <-- [9:AT+FTH=3\r]
Feb 25 14:39:50.50: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:50.50: [ 1248]: <-- data [3]
Feb 25 14:39:50.50: [ 1248]: <-- data [2]
Feb 25 14:39:51.80: [ 1248]: --> [2:OK]
Feb 25 14:39:51.80: [ 1248]: RECV send CRP (command repeat)
Feb 25 14:39:51.80: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:39:52.21: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:53.44: [ 1248]: --> [2:OK]
Feb 25 14:39:53.44: [ 1248]: RECV recv NSF (non-standard facilities)
Feb 25 14:39:53.44: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:39:53.49: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:53.82: [ 1248]: --> [2:OK]
Feb 25 14:39:53.82: [ 1248]: RECV recv DIS (identification signal)
Feb 25 14:39:53.82: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:39:53.87: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:53.94: [ 1248]: --> [5:ERROR]
Feb 25 14:39:53.94: [ 1248]: MODEM Command error
Feb 25 14:39:53.94: [ 1248]: FCS error
Feb 25 14:39:53.94: [ 1248]: <-- [10:AT+FRS=21\r]
Feb 25 14:39:54.23: [ 1248]: --> [2:OK]
Feb 25 14:39:54.23: [ 1248]: <-- [9:AT+FTH=3\r]
Feb 25 14:39:54.30: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:54.30: [ 1248]: <-- data [3]
Feb 25 14:39:54.30: [ 1248]: <-- data [2]
Feb 25 14:39:55.59: [ 1248]: --> [2:OK]
Feb 25 14:39:55.59: [ 1248]: RECV send CRP (command repeat)
Feb 25 14:39:55.59: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:39:56.01: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:57.24: [ 1248]: --> [2:OK]
Feb 25 14:39:57.24: [ 1248]: RECV recv NSF (non-standard facilities)
Feb 25 14:39:57.24: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:39:57.30: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:57.61: [ 1248]: --> [2:OK]
Feb 25 14:39:57.61: [ 1248]: RECV recv DIS (identification signal)
Feb 25 14:39:57.61: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:39:57.66: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:57.74: [ 1248]: --> [5:ERROR]
Feb 25 14:39:57.74: [ 1248]: MODEM Command error
Feb 25 14:39:57.74: [ 1248]: FCS error
Feb 25 14:39:57.74: [ 1248]: <-- [10:AT+FRS=21\r]
Feb 25 14:39:58.03: [ 1248]: --> [2:OK]
Feb 25 14:39:58.03: [ 1248]: <-- [9:AT+FTH=3\r]
Feb 25 14:39:58.11: [ 1248]: --> [7:CONNECT]
Feb 25 14:39:58.11: [ 1248]: <-- data [3]
Feb 25 14:39:58.11: [ 1248]: <-- data [2]
Feb 25 14:39:59.40: [ 1248]: --> [2:OK]
Feb 25 14:39:59.40: [ 1248]: RECV send CRP (command repeat)
Feb 25 14:39:59.40: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:39:59.82: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:01.07: [ 1248]: --> [2:OK]
Feb 25 14:40:01.07: [ 1248]: RECV recv NSF (non-standard facilities)
Feb 25 14:40:01.07: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:01.12: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:01.45: [ 1248]: --> [2:OK]
Feb 25 14:40:01.45: [ 1248]: RECV recv DIS (identification signal)
Feb 25 14:40:01.45: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:01.50: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:01.56: [ 1248]: --> [5:ERROR]
Feb 25 14:40:01.56: [ 1248]: MODEM Command error
Feb 25 14:40:01.56: [ 1248]: FCS error
Feb 25 14:40:01.56: [ 1248]: <-- [10:AT+FRS=21\r]
Feb 25 14:40:01.85: [ 1248]: --> [2:OK]
Feb 25 14:40:01.85: [ 1248]: <-- [9:AT+FTH=3\r]
Feb 25 14:40:01.92: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:01.92: [ 1248]: <-- data [3]
Feb 25 14:40:01.92: [ 1248]: <-- data [2]
Feb 25 14:40:03.22: [ 1248]: --> [2:OK]
Feb 25 14:40:03.22: [ 1248]: RECV send CRP (command repeat)
Feb 25 14:40:03.22: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:03.61: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:04.89: [ 1248]: --> [2:OK]
Feb 25 14:40:04.89: [ 1248]: RECV recv NSF (non-standard facilities)
Feb 25 14:40:04.89: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:04.95: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:05.27: [ 1248]: --> [2:OK]
Feb 25 14:40:05.27: [ 1248]: RECV recv DIS (identification signal)
Feb 25 14:40:05.27: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:05.33: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:05.38: [ 1248]: --> [5:ERROR]
Feb 25 14:40:05.38: [ 1248]: MODEM Command error
Feb 25 14:40:05.38: [ 1248]: FCS error
Feb 25 14:40:05.38: [ 1248]: <-- [10:AT+FRS=21\r]
Feb 25 14:40:05.67: [ 1248]: --> [2:OK]
Feb 25 14:40:05.67: [ 1248]: <-- [9:AT+FTH=3\r]
Feb 25 14:40:05.75: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:05.75: [ 1248]: <-- data [3]
Feb 25 14:40:05.75: [ 1248]: <-- data [2]
Feb 25 14:40:07.04: [ 1248]: --> [2:OK]
Feb 25 14:40:07.04: [ 1248]: RECV send CRP (command repeat)
Feb 25 14:40:07.04: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:07.45: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:08.69: [ 1248]: --> [2:OK]
Feb 25 14:40:08.69: [ 1248]: RECV recv NSF (non-standard facilities)
Feb 25 14:40:08.69: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:08.74: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:09.06: [ 1248]: --> [2:OK]
Feb 25 14:40:09.06: [ 1248]: RECV recv DIS (identification signal)
Feb 25 14:40:09.06: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:09.11: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:09.19: [ 1248]: --> [5:ERROR]
Feb 25 14:40:09.19: [ 1248]: MODEM Command error
Feb 25 14:40:09.19: [ 1248]: FCS error
Feb 25 14:40:09.19: [ 1248]: <-- [10:AT+FRS=21\r]
Feb 25 14:40:09.48: [ 1248]: --> [2:OK]
Feb 25 14:40:09.48: [ 1248]: <-- [9:AT+FTH=3\r]
Feb 25 14:40:09.56: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:09.56: [ 1248]: <-- data [3]
Feb 25 14:40:09.56: [ 1248]: <-- data [2]
Feb 25 14:40:10.85: [ 1248]: --> [2:OK]
Feb 25 14:40:10.85: [ 1248]: RECV send CRP (command repeat)
Feb 25 14:40:10.85: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:11.23: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:12.52: [ 1248]: --> [2:OK]
Feb 25 14:40:12.52: [ 1248]: RECV recv NSF (non-standard facilities)
Feb 25 14:40:12.52: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:12.58: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:12.90: [ 1248]: --> [2:OK]
Feb 25 14:40:12.90: [ 1248]: RECV recv DIS (identification signal)
Feb 25 14:40:12.90: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:12.95: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:13.01: [ 1248]: --> [5:ERROR]
Feb 25 14:40:13.01: [ 1248]: MODEM Command error
Feb 25 14:40:13.01: [ 1248]: FCS error
Feb 25 14:40:13.01: [ 1248]: <-- [10:AT+FRS=21\r]
Feb 25 14:40:13.30: [ 1248]: --> [2:OK]
Feb 25 14:40:13.30: [ 1248]: <-- [9:AT+FTH=3\r]
Feb 25 14:40:13.38: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:13.38: [ 1248]: <-- data [3]
Feb 25 14:40:13.38: [ 1248]: <-- data [2]
Feb 25 14:40:14.68: [ 1248]: --> [2:OK]
Feb 25 14:40:14.68: [ 1248]: RECV send CRP (command repeat)
Feb 25 14:40:14.68: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:15.09: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:16.33: [ 1248]: --> [2:OK]
Feb 25 14:40:16.33: [ 1248]: RECV recv NSF (non-standard facilities)
Feb 25 14:40:16.33: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:16.38: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:16.70: [ 1248]: --> [2:OK]
Feb 25 14:40:16.70: [ 1248]: RECV recv DIS (identification signal)
Feb 25 14:40:16.70: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:16.75: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:16.82: [ 1248]: --> [5:ERROR]
Feb 25 14:40:16.82: [ 1248]: MODEM Command error
Feb 25 14:40:16.82: [ 1248]: FCS error
Feb 25 14:40:16.82: [ 1248]: <-- [10:AT+FRS=21\r]
Feb 25 14:40:17.11: [ 1248]: --> [2:OK]
Feb 25 14:40:17.11: [ 1248]: <-- [9:AT+FTH=3\r]
Feb 25 14:40:17.19: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:17.19: [ 1248]: <-- data [3]
Feb 25 14:40:17.19: [ 1248]: <-- data [2]
Feb 25 14:40:18.48: [ 1248]: --> [2:OK]
Feb 25 14:40:18.48: [ 1248]: RECV send CRP (command repeat)
Feb 25 14:40:18.48: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:18.89: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:20.13: [ 1248]: --> [2:OK]
Feb 25 14:40:20.13: [ 1248]: RECV recv NSF (non-standard facilities)
Feb 25 14:40:20.13: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:20.19: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:20.50: [ 1248]: --> [2:OK]
Feb 25 14:40:20.50: [ 1248]: RECV recv DIS (identification signal)
Feb 25 14:40:20.50: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:20.55: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:20.62: [ 1248]: --> [5:ERROR]
Feb 25 14:40:20.62: [ 1248]: MODEM Command error
Feb 25 14:40:20.62: [ 1248]: FCS error
Feb 25 14:40:20.62: [ 1248]: <-- [10:AT+FRS=21\r]
Feb 25 14:40:20.90: [ 1248]: --> [2:OK]
Feb 25 14:40:20.90: [ 1248]: <-- [9:AT+FTH=3\r]
Feb 25 14:40:20.98: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:20.98: [ 1248]: <-- data [3]
Feb 25 14:40:20.98: [ 1248]: <-- data [2]
Feb 25 14:40:22.27: [ 1248]: --> [2:OK]
Feb 25 14:40:22.27: [ 1248]: RECV send CRP (command repeat)
Feb 25 14:40:22.27: [ 1248]: <-- [9:AT+FRH=3\r]
Feb 25 14:40:22.74: [ 1248]: --> [7:CONNECT]
Feb 25 14:40:23.69: [ 1248]: --> [2:OK]
Feb 25 14:40:23.69: [ 1248]: RECV recv DCN (disconnect)
Feb 25 14:40:23.69: [ 1248]: RECV FAX: RSPREC error/got DCN (sender abort)
Feb 25 14:40:23.69: [ 1248]: RECV FAX: end
Feb 25 14:40:23.69: [ 1248]: RSPREC error/got DCN (sender abort)
Feb 25 14:40:23.69: [ 1248]: SESSION END

Can someone please help me fix this problem ?

Sincerely
Robert B 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Project hosted by iFAX Solutions