 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Error sending - receiving only if microfilter is on
- To: hylafax-users@xxxxxxxxxxx
- Subject: [hylafax-users] Error sending - receiving only if microfilter is on
- From: "Javi Legido" <javi@xxxxxxxxxx>
- Date: Mon, 19 Jan 2009 14:34:33 +0100
Hi.
I tested thes who schemmas:
[A]
=== [PTR [1] ] == (Microfilter) == [Phone]
== (Microfilter) == [Modem] == (Com port) [Server]
== [Router]
[B]
=== [PTR [1] ] == [Phone]
== [Modem] == (Com port) [Server]
== [Router]
Schemma A: -Router works
-Hylafax can't receive and send faxes
Schemma B: -Router desynchronizes
-Hylafax can receive and send faxes
I also tested schemma A in other line, and it works fine (same
external modem, same Debian server....). Then I think is a ISP related
problem, but last day an ISP IT comes to review my line and says to me
all works fine.
I ask: it's possible to do a Hylafax configuration change to allow
send and receive faxes under microfilters?
Thanks in advice.
Javier Legido
[1] http://es.wikipedia.org/wiki/Punto_de_terminaci%C3%B3n_de_red
----------------------------------- Files & logs
----------------------------------
/etc/hylafax/config.ttyS0
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class1 # use this to supply a hint
ModemRate: 19200 # rate for DCE-DTE communication
ModemFlowControl: rtscts # default
#
ModemNoFlowCmd: AT&K0 # setup no flow control
ModemHardFlowCmd: AT&K3 # setup hardware flow control
ModemSoftFlowCmd: AT&K4 # setup software flow control
ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)
#
ModemMfrQueryCmd: !Rockwell
ModemModelQueryCmd: !RC288DPi
ModemRevQueryCmd: ATI3 # product information
#
ModemDialCmd: ATDT%s # T for tone dialing
/var/spool/hylafax/log/c000000077
ene 19 12:22:00.19: [ 2230]: SESSION BEGIN 000000077 34415FAX_TO_NUMBER
ene 19 12:22:00.19: [ 2230]: HylaFAX (tm) Version 4.4.4
ene 19 12:22:00.19: [ 2230]: SEND FAX: JOB 5008 DEST FAX_TO_NUMBER
COMMID 000000077 DEVICE '/dev/ttyS0' FROM 'root <root@servidor>' USER
root
ene 19 12:22:00.19: [ 2230]: <-- [12:AT+FCLASS=1\r]
ene 19 12:22:00.21: [ 2230]: --> [2:OK]
ene 19 12:22:00.21: [ 2230]: DIAL FAX_TO_NUMBER
ene 19 12:22:00.21: [ 2230]: <-- [14:ATDTFAX_TO_NUMBER\r]
ene 19 12:22:18.94: [ 2230]: --> [7:CONNECT]
ene 19 12:22:20.44: [ 2230]: --> [2:OK]
ene 19 12:22:20.44: [ 2230]: REMOTE CSI "OTHER_FAX_NUMBER"
ene 19 12:22:20.44: [ 2230]: <-- [9:AT+FRH=3\r]
ene 19 12:22:20.46: [ 2230]: --> [7:CONNECT]
ene 19 12:22:20.87: [ 2230]: --> [2:OK]
ene 19 12:22:20.87: [ 2230]: REMOTE best rate 14400 bit/s
ene 19 12:22:20.87: [ 2230]: REMOTE max A3 page width (303 mm)
ene 19 12:22:20.87: [ 2230]: REMOTE max unlimited page length
ene 19 12:22:20.87: [ 2230]: REMOTE best vres R16 x 15.4 line/mm
ene 19 12:22:20.87: [ 2230]: REMOTE format support: MH, MR, MMR, JBIG
ene 19 12:22:20.87: [ 2230]: REMOTE supports T.30 Annex A, 256-byte ECM
ene 19 12:22:20.87: [ 2230]: REMOTE best 0 ms/scanline
ene 19 12:22:20.87: [ 2230]: USE 14400 bit/s
ene 19 12:22:20.87: [ 2230]: USE error correction mode
ene 19 12:22:20.87: [ 2230]: SEND file "docq/doc5008.pdf;c0"
ene 19 12:22:20.87: [ 2230]: USE A4 page width (215 mm)
ene 19 12:22:20.87: [ 2230]: USE unlimited page length
ene 19 12:22:20.87: [ 2230]: USE 3.85 line/mm
ene 19 12:22:20.87: [ 2230]: USE 2-D MMR
ene 19 12:22:20.87: [ 2230]: USE 0 ms/scanline
ene 19 12:22:20.87: [ 2230]: SEND training at v.17 14400 bit/s
ene 19 12:22:20.87: [ 2230]: <-- [9:AT+FRS=7\r]
ene 19 12:22:20.99: [ 2230]: --> [2:OK]
ene 19 12:22:20.99: [ 2230]: <-- [9:AT+FTH=3\r]
ene 19 12:22:21.03: [ 2230]: --> [7:CONNECT]
ene 19 12:22:21.03: [ 2230]: <-- data [23]
ene 19 12:22:21.03: [ 2230]: <-- data [2]
ene 19 12:22:22.82: [ 2230]: --> [7:CONNECT]
ene 19 12:22:22.82: [ 2230]: <-- data [7]
ene 19 12:22:22.82: [ 2230]: <-- data [2]
ene 19 12:22:23.28: [ 2230]: --> [2:OK]
ene 19 12:22:23.28: [ 2230]: <-- [9:AT+FTS=7\r]
ene 19 12:22:23.37: [ 2230]: --> [2:OK]
ene 19 12:22:23.37: [ 2230]: <-- [11:AT+FTM=145\r]
ene 19 12:22:23.41: [ 2230]: --> [7:CONNECT]
ene 19 12:22:23.41: [ 2230]: <-- data [1024]
ene 19 12:22:23.41: [ 2230]: <-- data [1024]
ene 19 12:22:23.41: [ 2230]: <-- data [652]
ene 19 12:22:23.41: [ 2230]: <-- data [2]
ene 19 12:22:26.52: [ 2230]: --> [2:OK]
ene 19 12:22:26.52: [ 2230]: <-- [9:AT+FRH=3\r]
ene 19 12:22:29.62: [ 2230]: --> [0:]
ene 19 12:22:29.62: [ 2230]: MODEM <Empty line>
ene 19 12:22:29.62: [ 2230]: <-- data [1]
ene 19 12:22:29.67: [ 2230]: --> [2:OK]
ene 19 12:22:29.67: [ 2230]: <-- [9:AT+FRS=7\r]
ene 19 12:22:29.78: [ 2230]: --> [2:OK]
ene 19 12:22:29.78: [ 2230]: SEND training at v.17 12000 bit/s
ene 19 12:22:29.78: [ 2230]: <-- [9:AT+FTH=3\r]
ene 19 12:22:29.82: [ 2230]: --> [7:CONNECT]
ene 19 12:22:29.82: [ 2230]: <-- data [23]
ene 19 12:22:29.82: [ 2230]: <-- data [2]
ene 19 12:22:31.61: [ 2230]: --> [7:CONNECT]
ene 19 12:22:31.61: [ 2230]: <-- data [7]
ene 19 12:22:31.61: [ 2230]: <-- data [2]
ene 19 12:22:32.07: [ 2230]: --> [2:OK]
ene 19 12:22:32.07: [ 2230]: <-- [9:AT+FTS=7\r]
ene 19 12:22:32.16: [ 2230]: --> [2:OK]
ene 19 12:22:32.16: [ 2230]: <-- [11:AT+FTM=121\r]
ene 19 12:22:32.20: [ 2230]: --> [7:CONNECT]
ene 19 12:22:32.20: [ 2230]: <-- data [1024]
ene 19 12:22:32.20: [ 2230]: <-- data [1024]
ene 19 12:22:32.20: [ 2230]: <-- data [202]
ene 19 12:22:32.20: [ 2230]: <-- data [2]
ene 19 12:22:35.31: [ 2230]: --> [2:OK]
ene 19 12:22:35.31: [ 2230]: <-- [9:AT+FRH=3\r]
ene 19 12:22:38.41: [ 2230]: --> [0:]
ene 19 12:22:38.41: [ 2230]: MODEM <Empty line>
ene 19 12:22:38.41: [ 2230]: <-- data [1]
ene 19 12:22:38.46: [ 2230]: --> [2:OK]
ene 19 12:22:38.46: [ 2230]: <-- [9:AT+FRS=7\r]
ene 19 12:22:38.57: [ 2230]: --> [2:OK]
ene 19 12:22:38.57: [ 2230]: SEND training at v.29 9600 bit/s
ene 19 12:22:38.57: [ 2230]: <-- [9:AT+FTH=3\r]
ene 19 12:22:38.61: [ 2230]: --> [7:CONNECT]
ene 19 12:22:38.61: [ 2230]: <-- data [23]
ene 19 12:22:38.61: [ 2230]: <-- data [2]
ene 19 12:22:40.39: [ 2230]: --> [7:CONNECT]
ene 19 12:22:40.39: [ 2230]: <-- data [7]
ene 19 12:22:40.39: [ 2230]: <-- data [2]
ene 19 12:22:40.86: [ 2230]: --> [2:OK]
ene 19 12:22:40.86: [ 2230]: <-- [9:AT+FTS=7\r]
ene 19 12:22:40.95: [ 2230]: --> [2:OK]
ene 19 12:22:40.95: [ 2230]: <-- [10:AT+FTM=96\r]
ene 19 12:22:41.02: [ 2230]: --> [7:CONNECT]
ene 19 12:22:41.02: [ 2230]: <-- data [1024]
ene 19 12:22:41.02: [ 2230]: <-- data [776]
ene 19 12:22:41.02: [ 2230]: <-- data [2]
ene 19 12:22:42.97: [ 2230]: --> [2:OK]
ene 19 12:22:42.97: [ 2230]: <-- [9:AT+FRH=3\r]
ene 19 12:22:46.07: [ 2230]: --> [0:]
ene 19 12:22:46.07: [ 2230]: MODEM <Empty line>
ene 19 12:22:46.07: [ 2230]: <-- data [1]
ene 19 12:22:46.13: [ 2230]: --> [2:OK]
ene 19 12:22:46.13: [ 2230]: <-- [9:AT+FRS=7\r]
ene 19 12:22:46.24: [ 2230]: --> [2:OK]
ene 19 12:22:46.24: [ 2230]: SEND training at v.29 7200 bit/s
ene 19 12:22:46.24: [ 2230]: <-- [9:AT+FTH=3\r]
ene 19 12:22:46.28: [ 2230]: --> [7:CONNECT]
ene 19 12:22:46.28: [ 2230]: <-- data [23]
ene 19 12:22:46.28: [ 2230]: <-- data [2]
ene 19 12:22:48.07: [ 2230]: --> [7:CONNECT]
ene 19 12:22:48.07: [ 2230]: <-- data [7]
ene 19 12:22:48.07: [ 2230]: <-- data [2]
ene 19 12:22:48.53: [ 2230]: --> [2:OK]
ene 19 12:22:48.53: [ 2230]: <-- [9:AT+FTS=7\r]
ene 19 12:22:48.62: [ 2230]: --> [2:OK]
ene 19 12:22:48.62: [ 2230]: <-- [10:AT+FTM=72\r]
ene 19 12:22:48.69: [ 2230]: --> [7:CONNECT]
ene 19 12:22:48.69: [ 2230]: <-- data [1024]
ene 19 12:22:48.69: [ 2230]: <-- data [326]
ene 19 12:22:48.69: [ 2230]: <-- data [2]
ene 19 12:22:50.64: [ 2230]: --> [2:OK]
ene 19 12:22:50.64: [ 2230]: <-- [9:AT+FRH=3\r]
ene 19 12:22:53.74: [ 2230]: --> [0:]
ene 19 12:22:53.74: [ 2230]: MODEM <Empty line>
ene 19 12:22:53.74: [ 2230]: <-- data [1]
ene 19 12:22:53.79: [ 2230]: --> [2:OK]
ene 19 12:22:53.79: [ 2230]: <-- [9:AT+FRS=7\r]
ene 19 12:22:53.91: [ 2230]: --> [2:OK]
ene 19 12:22:53.91: [ 2230]: SEND training at v.27ter 4800 bit/s
ene 19 12:22:53.91: [ 2230]: <-- [9:AT+FTH=3\r]
ene 19 12:22:53.95: [ 2230]: --> [7:CONNECT]
ene 19 12:22:53.95: [ 2230]: <-- data [23]
ene 19 12:22:53.95: [ 2230]: <-- data [2]
ene 19 12:22:55.74: [ 2230]: --> [7:CONNECT]
ene 19 12:22:55.74: [ 2230]: <-- data [7]
ene 19 12:22:55.74: [ 2230]: <-- data [2]
ene 19 12:22:56.20: [ 2230]: --> [2:OK]
ene 19 12:22:56.20: [ 2230]: <-- [9:AT+FTS=7\r]
ene 19 12:22:56.29: [ 2230]: --> [2:OK]
ene 19 12:22:56.29: [ 2230]: <-- [10:AT+FTM=48\r]
ene 19 12:22:56.33: [ 2230]: --> [7:CONNECT]
ene 19 12:22:56.33: [ 2230]: <-- data [900]
ene 19 12:22:56.33: [ 2230]: <-- data [2]
ene 19 12:22:58.76: [ 2230]: --> [2:OK]
ene 19 12:22:58.76: [ 2230]: <-- [9:AT+FRH=3\r]
ene 19 12:23:01.86: [ 2230]: --> [0:]
ene 19 12:23:01.86: [ 2230]: MODEM <Empty line>
ene 19 12:23:01.86: [ 2230]: <-- data [1]
ene 19 12:23:01.91: [ 2230]: --> [2:OK]
ene 19 12:23:01.91: [ 2230]: <-- [9:AT+FRS=7\r]
ene 19 12:23:02.02: [ 2230]: --> [2:OK]
ene 19 12:23:02.02: [ 2230]: SEND training at v.27ter fallback mode 2400 bit/s
ene 19 12:23:02.02: [ 2230]: <-- [9:AT+FTH=3\r]
ene 19 12:23:02.06: [ 2230]: --> [7:CONNECT]
ene 19 12:23:02.06: [ 2230]: <-- data [23]
ene 19 12:23:02.06: [ 2230]: <-- data [2]
ene 19 12:23:03.85: [ 2230]: --> [7:CONNECT]
ene 19 12:23:03.85: [ 2230]: <-- data [7]
ene 19 12:23:03.85: [ 2230]: <-- data [2]
ene 19 12:23:04.31: [ 2230]: --> [2:OK]
ene 19 12:23:04.31: [ 2230]: <-- [9:AT+FTS=7\r]
ene 19 12:23:04.41: [ 2230]: --> [2:OK]
ene 19 12:23:04.41: [ 2230]: <-- [10:AT+FTM=24\r]
ene 19 12:23:04.46: [ 2230]: --> [7:CONNECT]
ene 19 12:23:04.46: [ 2230]: <-- data [450]
ene 19 12:23:04.46: [ 2230]: <-- data [2]
ene 19 12:23:07.13: [ 2230]: --> [2:OK]
ene 19 12:23:07.13: [ 2230]: <-- [9:AT+FRH=3\r]
ene 19 12:23:10.23: [ 2230]: --> [0:]
ene 19 12:23:10.23: [ 2230]: MODEM <Empty line>
ene 19 12:23:10.23: [ 2230]: <-- data [1]
ene 19 12:23:10.28: [ 2230]: --> [2:OK]
ene 19 12:23:10.28: [ 2230]: <-- [9:AT+FRS=7\r]
ene 19 12:23:10.39: [ 2230]: --> [2:OK]
ene 19 12:23:10.39: [ 2230]: TRAINING failed
ene 19 12:23:10.39: [ 2230]: SEND: Giving up after 3 attempts to send
same page "docq/doc5008.pdf;c0", dirnum 0
ene 19 12:23:10.39: [ 2230]: <-- [9:AT+FTH=3\r]
ene 19 12:23:10.43: [ 2230]: --> [7:CONNECT]
ene 19 12:23:10.43: [ 2230]: <-- data [3]
ene 19 12:23:10.43: [ 2230]: <-- data [2]
ene 19 12:23:11.74: [ 2230]: --> [2:OK]
ene 19 12:23:12.74: [ 2230]: <-- [5:ATH0\r]
ene 19 12:23:13.49: [ 2230]: --> [2:OK]
ene 19 12:23:13.49: [ 2230]: SESSION END
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- Prev by Date: Re: [hylafax-users] Disable TCP/4559 listening on all interfaces?!?
- Next by Date: [hylafax-users] faxgetty/iaxmodem question
- Previous by thread: [hylafax-users] Trying to get Hylafax and T38Modem to play nice
- Next by thread: [hylafax-users] faxgetty/iaxmodem question
- Index(es):
Project hosted by iFAX Solutions