Re: [hylafax-users] USR USB Modem "wedged"?

[cvb@xxxxxxxxxxx]

> cvb@xxxxxxxxxxx wrote:
>> Yes, the default USR xon config added a few parameters for hardware
>> handshaking which are unknown to the USB modem.
> What were the necessary changes and what is the output of probemodem
> when run against this modem?

I changed

ModemNoFlowCmd:	AT&H0&I0&R1
ModemHardFlowCmd:	AT&H1&I0&R2
ModemSoftFlowCmd:	AT&H2&I2&R1
ModemResultCodesCmd:	ATQ0X4

to

ModemNoFlowCmd:		AT&H0
ModemHardFlowCmd:	AT&H1
ModemSoftFlowCmd:	AT&H2
ModemResultCodesCmd:	ATX4

(&I and &R are unknown to this modem and produced "ERROR".)

probemodem output:

Serial port that modem is connected to []? ttyACM0
Hmm, there does not appear to be an fuser command on your machine.
This means that I am unable to ensure that all processes using the
modem have been killed.  I will keep going, but beware that you may
have competition for the modem.

Now we are going to probe the tty port.  This takes a few seconds,
so be patient.  Note that if you do not have the modem cabled to
the port, or the modem is turned off, this may hang (just go and
cable up the modem or turn it on, or whatever).

Probing for best speed to talk to modem: 38400 OK.

This looks like a Class 1 modem.

ATI0	RESULT = "OK"	RESPONSE = "5601"
ATI1	RESULT = "OK"	RESPONSE = "E7C4"
ATI2	RESULT = "OK"	RESPONSE = "OK"
ATI3	RESULT = "OK"	RESPONSE = "U.S. Robotics 56K FAX USB V1.1.0"
ATI4	RESULT = "OK"	RESPONSE = " ----Option----- --Setting-- Cmd 
----Option----- --Setting-- --Cmd--"
ATI5	RESULT = "OK"	RESPONSE = " ----Option----- --Setting-- Cmd 
----Option----- --Setting-- --Cmd--"
ATI6	RESULT = "OK"	RESPONSE = " U.S. Robotics 56K FAX USB Link
Diagnostics..."
ATI7	RESULT = "OK"	RESPONSE = "Configuration Profile..."
ATI8	RESULT = "OK"	RESPONSE = "OK"
ATI9	RESULT = "OK"	RESPONSE = "(01.00HSM0A00\MODEM \PNP0303\U.S.Robotics
V.92 USB Modem23)"

Class 1 stuff...

AT+FCLASS=?	RESULT = "OK"	RESPONSE = "0,1"
AT+FCLASS?	RESULT = "OK"	RESPONSE = "1"
AT+FCLASS=0	RESULT = "OK"	RESPONSE = "OK"
AT+FCLASS=1	RESULT = "OK"	RESPONSE = "OK"
AT+FCLASS?	RESULT = "OK"	RESPONSE = "1"
AT+FJUNK=?	RESULT = "ERROR"	RESPONSE = "ERROR"
AT+FJUNK?	RESULT = "ERROR"	RESPONSE = "ERROR"
AT+FAA=?	RESULT = "OK"	RESPONSE = "(0-1)"
AT+FAA?	RESULT = "OK"	RESPONSE = "0"
AT+FAE=?	RESULT = "ERROR"	RESPONSE = "ERROR"
AT+FAE?	RESULT = "ERROR"	RESPONSE = "ERROR"
AT+FTH=?	RESULT = "OK"	RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FRH=?	RESULT = "OK"	RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FTM=?	RESULT = "OK"	RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FRM=?	RESULT = "OK"	RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FTS=?	RESULT = "ERROR"	RESPONSE = "ERROR"
AT+FRS=?	RESULT = "ERROR"	RESPONSE = "ERROR"
Creating /etc/hylafax/config.ttyACM0.sav from
/var/spool/hylafax/etc/config.ttyACM0.sav.

Thanks, Christian


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*