[hylafax-users] modem problem

["Peter Todorov" <pmidas@xxxxxxxxx>]

Hello list,
I have FreeBSD 6.2 with HylaFAX 4.4.4 and Acorp serial outside modem. I install hylafax and do the config, but the modem is not dialing at all.
When I do this:
[root@taira /home/pmidas]# /sbin/dmesg | grep 'sio'
ioapic0 <Version 0.3> irqs 0-23 on motherboard
usb0: USB revision 1.0
usb1: USB revision 1.0
usb2: USB revision 1.0
usb3: EHCI version 1.0
usb3: USB revision 2.0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
[root@taira /home/pmidas]#


[root@taira /home/pmidas]# ls /dev
acd0            ctty            lpt0            stdin           ttyva
acpi            cuad0           lpt0.ctl        stdout          ttyvb
ad0             cuad0.init      mdctl           sysmouse        ttyvc
ad0s1           cuad0.lock      mem             ttyd0           ttyvd
ad0s1a          devctl          net             ttyd0.init      ttyve
ad0s1b          devstat         net1            ttyd0.lock      ttyvf
ad0s1c          fd              net2            ttyp0           urandom
ad0s1d          fd0             net3            ttyv0           usb
ad0s1e          fido            network         ttyv1           usb0
ad0s1f          geom.ctl        nfs4            ttyv2           usb1
agpgart         io              nfslock         ttyv3           usb2
apm             kbd0            null            ttyv4           usb3
ata             kbd1            pci             ttyv5           xpt0
atkbd0          kbdmux0         ppi0            ttyv6           zero
bpf0            klog            ptyp0           ttyv7
console         kmem            random          ttyv8
consolectl      log             stderr          ttyv9

I understand that the modem is on cuad0 and I configure that for faxmodem.


[root@taira /home/pmidas]# stty -a -f /dev/cuad0
speed 9600 baud; 0 rows; 0 columns;
lflags: -icanon -isig -iexten -echo -echoe -echok -echoke -echonl
        -echoctl -echoprt -altwerase -noflsh -tostop -flusho -pendin
        -nokerninfo -extproc
iflags: -istrip -icrnl -inlcr -igncr ixon ixoff ixany imaxbel -ignbrk
        brkint -inpck -ignpar -parmrk
oflags: -opost onlcr -ocrnl -oxtabs -onocr -onlret
cflags: cread cs8 -parenb -parodd hupcl clocal -cstopb -crtscts -dsrflow
        -dtrflow -mdmbuf
cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>;
        eol2 = <undef>; erase = ^?; erase2 = ^H; intr = ^C; kill = ^U;
        lnext = ^V; min = 1; quit = ^\; reprint = ^R; start = ^Q;
        status = ^T; stop = ^S; susp = ^Z; time = 0; werase = ^W;
[root@taira /home/pmidas]#

How can I test the modem to understand why it is not dialing?



-- 
честността не е порок