 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Modems
- To: "hylafax-users@xxxxxxxxxxx" <hylafax-users@xxxxxxxxxxx>
- Subject: [hylafax-users] Modems
- From: "Bowman, Mark" <mabowman@xxxxxxxxxxxxxxxxxxxxxx>
- Date: Thu, 30 Oct 2008 10:18:00 -0400
|
I am running FreeBSD 7 and Hylafax 4.4. I have added a new external modem via a usb port. I just don’t
understand enough of the system to determine where freebsd sees the modem so I
can add it. I have attached the dmsg information. I also added an internal
modem, which is probably a winmodem. I was hoping someone could let me know where
freebsd sees these modems. Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
1992, 1993, 1994 The Regents of the University of California.
All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008 root@xxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2392.04-MHz
686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping =
7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNXT-ID,xTPR> real memory = 260046848 (248 MB) avail memory = 240476160 (229 MB) ACPI APIC Table: <COMPAQ BROOKDG > ioapic0: Changing APIC ID to 8 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112,
RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008
19:59:27) acpi0: <COMPAQ CPQ0051> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, f700000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz
quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port
0xf808-0xf80b on acpi0 cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> mem
0xf0000000-0xf7ffffff,0xfc400000-0xfc47ffff irq 16 at device 2.0 on pci0 agp0: <Intel 82845M (845M GMCH) SVGA controller> on
vgapci0 agp0: detected 8060k stolen memory agp0: aperture size is 128M uhci0: <Intel 82801DB (ICH4) USB controller USB-A>
port 0x2440-0x245f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on
uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B>
port 0x2460-0x247f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on
uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller>
mem 0xfc480000-0xfc4803ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: wrong number of companions (3 != 2) usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on
ehci0 usb2: USB revision 2.0 uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00,
addr 1> on usb2 uhub2: 6 ports with 6 removable, self powered pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib1 fxp0: <Intel 82801DB (ICH4) Pro/100 VM Ethernet> port
0x1000-0x103f mem 0xfca00000-0xfca00fff irq 20 at device 8.0 on pci5 miibus0: <MII bus> on fxp0 inphy0: <i82562EM 10/100 media interface> PHY 1 on
miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto fxp0: Ethernet address: 00:0b:cd:c2:cb:df fxp0: [ITHREAD] pci5: <simple comms> at device 10.0 (no driver
attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x24a0-0x24af irq 18 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <multimedia, audio> at device 31.5 (no driver
attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64
irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4
flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: <Standard PC COM port> port 0x2f8-0x2ff irq 3 on
acpi0 sio1: type 16550A sio1: [FILTER] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on acpi0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pmtimer0 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE
mode ppc0: FIFO with 16/16/13 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2392044128 Hz quality
800 Timecounters tick every 1.000 msec hptrr: no controller detected. ad0: 38166MB <WDC WD400BB-60DGA0 05.03E05> at
ata0-master UDMA100 acd0: CDROM <HL-DT-ST CD-ROM GCR-8482B/1.03> at
ata1-master PIO4 Trying to mount root from ufs:/dev/ad0s1a drm0: <Intel i845G GMCH> on vgapci0 info: [drm] AGP at 0xf0000000 128MB info: [drm] Initialized i915 1.5.0 20060119 drm0: [ITHREAD] Waiting (max 60 seconds) for system process `vnlru' to
stop...done Waiting (max 60 seconds) for system process `bufdaemon' to
stop...done Waiting (max 60 seconds) for system process `syncer' to
stop... Syncing disks, vnodes remaining...2 1 1 0 0 done All buffers synced. Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
1992, 1993, 1994 The Regents of the University of California.
All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008 root@xxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2392.04-MHz
686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping =
7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNXT-ID,xTPR> real memory = 260046848 (248 MB) avail memory = 240476160 (229 MB) ACPI APIC Table: <COMPAQ BROOKDG > ioapic0: Changing APIC ID to 8 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112,
RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008
19:59:27) acpi0: <COMPAQ CPQ0051> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, f700000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz
quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port
0xf808-0xf80b on acpi0 cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> mem
0xf0000000-0xf7ffffff,0xfc400000-0xfc47ffff irq 16 at device 2.0 on pci0 agp0: <Intel 82845M (845M GMCH) SVGA controller> on
vgapci0 agp0: detected 8060k stolen memory agp0: aperture size is 128M uhci0: <Intel 82801DB (ICH4) USB controller USB-A>
port 0x2440-0x245f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on
uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B>
port 0x2460-0x247f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on
uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller>
mem 0xfc480000-0xfc4803ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: wrong number of companions (3 != 2) usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on
ehci0 usb2: USB revision 2.0 uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00,
addr 1> on usb2 uhub2: 6 ports with 6 removable, self powered pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib1 fxp0: <Intel 82801DB (ICH4) Pro/100 VM Ethernet> port
0x1000-0x103f mem 0xfca00000-0xfca00fff irq 20 at device 8.0 on pci5 miibus0: <MII bus> on fxp0 inphy0: <i82562EM 10/100 media interface> PHY 1 on
miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto fxp0: Ethernet address: 00:0b:cd:c2:cb:df fxp0: [ITHREAD] pci5: <simple comms> at device 10.0 (no driver
attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x24a0-0x24af irq 18 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <multimedia, audio> at device 31.5 (no driver
attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64
irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4
flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: <Standard PC COM port> port 0x2f8-0x2ff irq 3 on
acpi0 sio1: type 16550A sio1: [FILTER] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on acpi0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pmtimer0 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE
mode ppc0: FIFO with 16/16/13 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2392042128 Hz quality
800 Timecounters tick every 1.000 msec hptrr: no controller detected. ad0: 38166MB <WDC WD400BB-60DGA0 05.03E05> at
ata0-master UDMA100 acd0: CDROM <HL-DT-ST CD-ROM GCR-8482B/1.03> at
ata1-master PIO4 Trying to mount root from ufs:/dev/ad0s1a drm0: <Intel i845G GMCH> on vgapci0 info: [drm] AGP at 0xf0000000 128MB info: [drm] Initialized i915 1.5.0 20060119 drm0: [ITHREAD] Waiting (max 60 seconds) for system process `vnlru' to
stop...done Waiting (max 60 seconds) for system process `bufdaemon' to
stop...done Waiting (max 60 seconds) for system process `syncer' to
stop... Syncing disks, vnodes remaining...3 2 2 0 0 done All buffers synced. Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
1992, 1993, 1994 The Regents of the University of California.
All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008 root@xxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2392.04-MHz
686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping =
7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNXT-ID,xTPR> real memory = 260046848 (248 MB) avail memory = 240476160 (229 MB) ACPI APIC Table: <COMPAQ BROOKDG > ioapic0: Changing APIC ID to 8 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112,
RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008
19:59:27) acpi0: <COMPAQ CPQ0051> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, f700000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz
quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port
0xf808-0xf80b on acpi0 cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> mem
0xf0000000-0xf7ffffff,0xfc400000-0xfc47ffff irq 16 at device 2.0 on pci0 agp0: <Intel 82845M (845M GMCH) SVGA controller> on
vgapci0 agp0: detected 8060k stolen memory agp0: aperture size is 128M uhci0: <Intel 82801DB (ICH4) USB controller USB-A>
port 0x2440-0x245f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on
uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B>
port 0x2460-0x247f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on
uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller>
mem 0xfc480000-0xfc4803ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: wrong number of companions (3 != 2) usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on
ehci0 usb2: USB revision 2.0 uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00,
addr 1> on usb2 uhub2: 6 ports with 6 removable, self powered pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib1 fxp0: <Intel 82801DB (ICH4) Pro/100 VM Ethernet> port
0x1000-0x103f mem 0xfca00000-0xfca00fff irq 20 at device 8.0 on pci5 miibus0: <MII bus> on fxp0 inphy0: <i82562EM 10/100 media interface> PHY 1 on
miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto fxp0: Ethernet address: 00:0b:cd:c2:cb:df fxp0: [ITHREAD] pci5: <simple comms> at device 10.0 (no driver
attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x24a0-0x24af irq 18 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <multimedia, audio> at device 31.5 (no driver
attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64
irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4
flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: <Standard PC COM port> port 0x2f8-0x2ff irq 3 on
acpi0 sio1: type 16550A sio1: [FILTER] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on acpi0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pmtimer0 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE
mode ppc0: FIFO with 16/16/13 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2392041032 Hz quality
800 Timecounters tick every 1.000 msec hptrr: no controller detected. ad0: 38166MB <WDC WD400BB-60DGA0 05.03E05> at
ata0-master UDMA100 acd0: CDROM <HL-DT-ST CD-ROM GCR-8482B/1.03> at
ata1-master PIO4 Trying to mount root from ufs:/dev/ad0s1a drm0: <Intel i845G GMCH> on vgapci0 info: [drm] AGP at 0xf0000000 128MB info: [drm] Initialized i915 1.5.0 20060119 drm0: [ITHREAD] ugen0: <Belkin USB PDA Adapter Belkin Components, class
0/0, rev 1.10/1.02, addr 2> on uhub0 Waiting (max 60 seconds) for system process `vnlru' to
stop...done Waiting (max 60 seconds) for system process `bufdaemon' to
stop...done Waiting (max 60 seconds) for system process `syncer' to
stop... Syncing disks, vnodes remaining...2 1 1 0 0 done All buffers synced. Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
1992, 1993, 1994 The Regents of the University of California.
All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008 root@xxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2392.04-MHz
686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping =
7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNXT-ID,xTPR> real memory = 260046848 (248 MB) avail memory = 240476160 (229 MB) ACPI APIC Table: <COMPAQ BROOKDG > ioapic0: Changing APIC ID to 8 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112,
RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008
19:59:27) acpi0: <COMPAQ CPQ0051> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, f700000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz
quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port
0xf808-0xf80b on acpi0 cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> mem
0xf0000000-0xf7ffffff,0xfc400000-0xfc47ffff irq 16 at device 2.0 on pci0 agp0: <Intel 82845M (845M GMCH) SVGA controller> on
vgapci0 agp0: detected 8060k stolen memory agp0: aperture size is 128M uhci0: <Intel 82801DB (ICH4) USB controller USB-A>
port 0x2440-0x245f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on
uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B>
port 0x2460-0x247f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on
uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller>
mem 0xfc480000-0xfc4803ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: wrong number of companions (3 != 2) usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on
ehci0 usb2: USB revision 2.0 uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00,
addr 1> on usb2 uhub2: 6 ports with 6 removable, self powered pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib1 fxp0: <Intel 82801DB (ICH4) Pro/100 VM Ethernet> port
0x1000-0x103f mem 0xfca00000-0xfca00fff irq 20 at device 8.0 on pci5 miibus0: <MII bus> on fxp0 inphy0: <i82562EM 10/100 media interface> PHY 1 on
miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
auto fxp0: Ethernet address: 00:0b:cd:c2:cb:df fxp0: [ITHREAD] pci5: <simple comms> at device 10.0 (no driver
attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x24a0-0x24af irq 18 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] pci0: <multimedia, audio> at device 31.5 (no driver
attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64
irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4
flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: <Standard PC COM port> port 0x2f8-0x2ff irq 3 on
acpi0 sio1: type 16550A sio1: [FILTER] fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on acpi0 fdc0: [FILTER] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pmtimer0 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE
mode ppc0: FIFO with 16/16/13 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0 ugen0: <Belkin USB PDA Adapter Belkin Components, class
0/0, rev 1.10/1.02, addr 2> on uhub0 Timecounter "TSC" frequency 2392043080 Hz quality
800 Timecounters tick every 1.000 msec hptrr: no controller detected. ad0: 38166MB <WDC WD400BB-60DGA0 05.03E05> at
ata0-master UDMA100 acd0: CDROM <HL-DT-ST CD-ROM GCR-8482B/1.03> at
ata1-master PIO4 Trying to mount root from ufs:/dev/ad0s1a drm0: <Intel i845G GMCH> on vgapci0 info: [drm] AGP at 0xf0000000 128MB info: [drm] Initialized i915 1.5.0 20060119 drm0: [ITHREAD] Mark Bowman I.T. Manager Gannett Directories 989-453-2030 Ext. 126 248-416-2961 (Cell) |
- Follow-Ups:
- Re: [hylafax-users] Modems
- From: Nerijus Baliunas
- Re: [hylafax-users] Modems
- Prev by Date: Re: [hylafax-users] Human readable status instead of statuscode?
- Next by Date: Re: [hylafax-users] Modems
- Previous by thread: [hylafax-users] Problem with sending faxes
- Next by thread: Re: [hylafax-users] Modems
- Index(es):