![]() |
actually it didn't work out because of upgraiding iaxmodem, setting the iax client to 'transfer=no' (inbound) in asterisk solved the problem. ivona ----- Original Message ---- From: Miletic Ivona <ivona_miletic@xxxxxxxxx> To: hylafax-users@xxxxxxxxxxx Sent: Wednesday, October 8, 2008 3:32:01 PM Subject: Re: [hylafax-users] Receiving with iaxmodem: TRAINING failed --> problem solved with IAXModem version 1.1.0 ----- Original Message ---- From: Miletic Ivona <ivona_miletic@xxxxxxxxx> To: hylafax-users@xxxxxxxxxxx Sent: Tuesday, October 7, 2008 2:27:35 PM Subject: [hylafax-users] Receiving with iaxmodem: TRAINING failed Receiving in general works fine, but not from certain senders. See session log file below: Oct 06 16:45:01.47: [ 5599]: --> [7:CONNECT] Oct 06 16:45:01.91: [ 5599]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled Oct 06 16:45:01.91: [ 5599]: RECV: TCF 514 bytes, 0% non-zero, 338 zero-run Oct 06 16:45:01.91: [ 5599]: RECV: reject TCF (zero run too short, min 600) Oct 06 16:45:01.91: [ 5599]: --> [10:NO CARRIER] Oct 06 16:45:01.91: [ 5599]: DELAY 70 ms Oct 06 16:45:01.98: [ 5599]: <-- [9:AT+FTH=3\r] Oct 06 16:45:01.98: [ 5599]: --> [5:ERROR] Oct 06 16:45:01.98: [ 5599]: TRAINING failed Oct 06 16:45:01.98: [ 5599]: <-- [9:AT+FRH=3\r] Oct 06 16:45:01.98: [ 5599]: --> [5:ERROR] Oct 06 16:45:01.98: [ 5599]: MODEM Command error Oct 06 16:45:01.98: [ 5599]: RECV FAX: RSPREC error/got EOT {E106} Oct 06 16:45:01.98: [ 5599]: RECV FAX: end Oct 06 16:45:01.98: [ 5599]: RSPREC error/got EOT {E106} Oct 06 16:45:01.98: [ 5599]: SESSION END ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx* ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx* ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*