Re: [hylafax-users] help with an elsa microlink 56k

["reza" <issanyr@xxxxxxxxxxxx>]

Hi,

After few search, I've found a valid elsa config file in source package of hylafax (shame on me lol).
After tests, the communication seems to work well, but it seems that hylafax doesn't detect the fax signalling :

sep 17 22:18:54.63: [15876]: REMOTE HANGUP: Unspecified Transmit Phase B error (code 20) sep 17 22:18:54.63: [15876]: SEND FAILED: JOB 29 DEST 04xxxERR [0]
sep 17 22:18:54.63: [15876]: SEND FAILED: JOB 29 DEST 0xxxx ERR [334] ; too many attempts to send
sep 17 22:18:55.63: [15876]: <-- [4:ATH\r] sep 17 22:18:57.10: [15876]: --> [7:+FHS:11] sep 17 22:18:57.10: [15876]: REMOTE HANGUP: No answer (T.30 T1 timeout) (code 11)
sep 1722:18:57.10: [15876]: MODEM Hang up sep 17 22:18:57.10: [15876]: SESSION END

I'm sending fax using winprint.

any idea ?

Thanks for your helps.

azer.

-----Message d'origine-----
De : Matthias Reich [mailto:rei@xxxxxxxx] 
Envoyé : jeudi 18 septembre 2008 06:35
À : hylafax-users@xxxxxxxxxxx
Cc : reza
Objet : Re: [hylafax-users] help with an elsa microlink 56k

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Azer,

ist your modem connected to a PABX and you need to dial a "0" or something to 
get a line or maybe you have to tell the modem not to wait for a line
(ATX3 or something).

Matthias
> Hi
>
>
>
> Sorry for my bad english I'm a french people.
>
>
>
> I'd like to use hylafax with an elsa microlink 56k modem (in France). I
> have done
>
> the default configuration of the modem but I have a queue response by
> e-mail
>
> when I send a fax.
>
>
>
> sep 17 13:44:59.66: [10045]: SESSION BEGIN 000000017 334xxxxxxxx
>
> sep 17 13:44:59.66: [10045]: HylaFAX (tm) Version 4.4.4
>
> sep 17 13:44:59.66: [10045]: SEND FAX: JOB 12 DEST 04xxxxxxxxxx COMMID
> 000000017 DEVICE '/dev/ttyUSB0' FROM 'user <xxxx@xxxxxxxx>' USER user
>
> sep 17 13:44:59.66: [10045]: <-- [12:AT+FCLASS=1\r]
>
> sep 17 13:44:59.72: [10045]: --> [2:OK]
>
> sep 17 13:44:59.72: [10045]: DIAL 94064635
>
> sep 17 13:44:59.72: [10045]: <-- [13:ATDTxxxxxxxx\r]
>
> sep 17 13:45:23.38: [10045]: --> [4:BUSY]
>
> sep 17 13:45:23.38: [10045]: SEND FAILED: JOB 12 DEST 04xxxxxxxx ERR [1]
> Busy signal detected
>
> sep 17 13:45:24.38: [10045]: <-- [5:ATH0\r]
>
> sep 17 13:45:24.42: [10045]: --> [2:OK]
>
> sep 17 13:45:24.42: [10045]: SESSION END
>
>
>
> root@xxx:/var/spool/hylafax/etc# probemodem
>
> Serial port that modem is connected to []? ttyUSB0
>
>
>
> Now we are going to probe the tty port.  This takes a few seconds,
>
> so be patient.  Note that if you do not have the modem cabled to
>
> the port, or the modem is turned off, this may hang (just go and
>
> cable up the modem or turn it on, or whatever).
>
>
>
> Probing for best speed to talk to modem: 38400 OK.
>
>
>
> This looks like a Class 1, 2, 2.0, 1.0 and 2.1 modem.
>
>
>
> ATI0    RESULT = "OK"   RESPONSE = "282"
>
> ATI1    RESULT = "OK"   RESPONSE = "255"
>
> ATI2    RESULT = "OK"   RESPONSE = "OK"
>
> ATI3    RESULT = "OK"   RESPONSE = "Version 1.10 / 19.07.1999"
>
> ATI4    RESULT = "OK"   RESPONSE = "  E1    L2    M1    Q0    V1    X4"
>
> ATI5    RESULT = "OK"   RESPONSE = "OK"
>
> ATI6    RESULT = "OK"   RESPONSE = "MicroLink 56k Internet"
>
> ATI7    RESULT = "OK"   RESPONSE = "OK"
>
> ATI8    RESULT = "OK"   RESPONSE = "OK"
>
> ATI9    RESULT = "OK"   RESPONSE = "(#ELS035079128\MODEM\MicroLink 56k
> Internet00)"
>
>
>
> Class 1 stuff...
>
>
>
> AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,1.0,2,2.0,2.1,8,8.0"
>
> AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
>
> AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
>
> AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
>
> AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
>
> AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
>
> AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
>
> AT+FAA=?        RESULT = "OK"   RESPONSE = "(0,1)"
>
> AT+FAA? RESULT = "OK"   RESPONSE = "0"
>
> AT+FAE=?        RESULT = "OK"   RESPONSE = "0,1"
>
> AT+FAE? RESULT = "OK"   RESPONSE = "0"
>
> AT+FTH=?        RESULT = "OK"   RESPONSE =
> "3,24,48,72-74,96-98,121,122,145,146"
>
> AT+FRH=?        RESULT = "OK"   RESPONSE =
> "3,24,48,72-74,96-98,121,122,145,146"
>
> AT+FTM=?        RESULT = "OK"   RESPONSE =
> "3,24,48,72-74,96-98,121,122,145,146"
>
> AT+FRM=?        RESULT = "OK"   RESPONSE =
> "3,24,48,72-74,96-98,121,122,145,146"
>
> AT+FTS=?        RESULT = "OK"   RESPONSE = "0-255"
>
> AT+FRS=?        RESULT = "OK"   RESPONSE = "0-255"
>
>
>
> The config file is configured with class 1 modem. I don't understand why
> the command ATDT deletes the two first number of the fax number.
>
> Is someone have a config.ttySx for this modem please ? I've already test
> http://www.hylafax.org/archive/2000-06/msg00035.php but the modem
> doesn't
>
> initialize in class 2. Maybe my config file is bad.
>
>
>
> Thanks for your helps.
>
>
>
> ----
>
> azer.



- -- 
Matthias Reich  

mail: rei@xxxxxxxx web: http://www.hagos.de
phone: +49 711 788057092 fax: +49 711 788057035
- --------------------------------------------------------------
HAGOS
Verbund deutscher Kachelofen- und Luftheizungsbauerbetriebe eG 
Industriestr. 62, D-70565 Stuttgart  
Registergericht: Stuttgart GnR 77 USt.-ID-Nr. DE 147799748
Rechtsform: Genossenschaft Sitz: Stuttgart
Vorstände: Guido Eichel, Ralf Tigges
Aufsichtsratsvorsitzender: Thomas Müller
- --------------------------------------------------------------
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iD8DBQFI0dqGcjMVLPQ5oUkRAgzVAKCJ1MDzRQqHGNGyrPmJ4lHHI/pC3wCcCCzz
rCBV+Y8LrRVBAmImE3SfP0c=
=WpHE
-----END PGP SIGNATURE-----


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*