[hylafax-users] help with an elsa microlink 56k

["reza" <issanyr@xxxxxxxxxxxx>]

Hi

 

Sorry for my bad english I’m a french people.

 

I’d like to use hylafax with an elsa microlink 56k modem (in France). I have done

the default configuration of the modem but I have a queue response by e-mail

when I send a fax.

 

sep 17 13:44:59.66: [10045]: SESSION BEGIN 000000017 334xxxxxxxx

sep 17 13:44:59.66: [10045]: HylaFAX (tm) Version 4.4.4

sep 17 13:44:59.66: [10045]: SEND FAX: JOB 12 DEST 04xxxxxxxxxx COMMID 000000017 DEVICE '/dev/ttyUSB0' FROM 'user <xxxx@xxxxxxxx>' USER user

sep 17 13:44:59.66: [10045]: <-- [12:AT+FCLASS=1\r]

sep 17 13:44:59.72: [10045]: --> [2:OK]

sep 17 13:44:59.72: [10045]: DIAL 94064635

sep 17 13:44:59.72: [10045]: <-- [13:ATDTxxxxxxxx\r]

sep 17 13:45:23.38: [10045]: --> [4:BUSY]

sep 17 13:45:23.38: [10045]: SEND FAILED: JOB 12 DEST 04xxxxxxxx ERR [1] Busy signal detected

sep 17 13:45:24.38: [10045]: <-- [5:ATH0\r]

sep 17 13:45:24.42: [10045]: --> [2:OK]

sep 17 13:45:24.42: [10045]: SESSION END

 

root@xxx:/var/spool/hylafax/etc# probemodem

Serial port that modem is connected to []? ttyUSB0

 

Now we are going to probe the tty port.  This takes a few seconds,

so be patient.  Note that if you do not have the modem cabled to

the port, or the modem is turned off, this may hang (just go and

cable up the modem or turn it on, or whatever).

 

Probing for best speed to talk to modem: 38400 OK.

 

This looks like a Class 1, 2, 2.0, 1.0 and 2.1 modem.

 

ATI0    RESULT = "OK"   RESPONSE = "282"

ATI1    RESULT = "OK"   RESPONSE = "255"

ATI2    RESULT = "OK"   RESPONSE = "OK"

ATI3    RESULT = "OK"   RESPONSE = "Version 1.10 / 19.07.1999"

ATI4    RESULT = "OK"   RESPONSE = "  E1    L2    M1    Q0    V1    X4"

ATI5    RESULT = "OK"   RESPONSE = "OK"

ATI6    RESULT = "OK"   RESPONSE = "MicroLink 56k Internet"

ATI7    RESULT = "OK"   RESPONSE = "OK"

ATI8    RESULT = "OK"   RESPONSE = "OK"

ATI9    RESULT = "OK"   RESPONSE = "(#ELS035079128\MODEM\MicroLink 56k Internet00)"

 

Class 1 stuff...

 

AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,1.0,2,2.0,2.1,8,8.0"

AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"

AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"

AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"

AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"

AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"

AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"

AT+FAA=?        RESULT = "OK"   RESPONSE = "(0,1)"

AT+FAA? RESULT = "OK"   RESPONSE = "0"

AT+FAE=?        RESULT = "OK"   RESPONSE = "0,1"

AT+FAE? RESULT = "OK"   RESPONSE = "0"

AT+FTH=?        RESULT = "OK"   RESPONSE = "3,24,48,72-74,96-98,121,122,145,146"

AT+FRH=?        RESULT = "OK"   RESPONSE = "3,24,48,72-74,96-98,121,122,145,146"

AT+FTM=?        RESULT = "OK"   RESPONSE = "3,24,48,72-74,96-98,121,122,145,146"

AT+FRM=?        RESULT = "OK"   RESPONSE = "3,24,48,72-74,96-98,121,122,145,146"

AT+FTS=?        RESULT = "OK"   RESPONSE = "0-255"

AT+FRS=?        RESULT = "OK"   RESPONSE = "0-255"

 

The config file is configured with class 1 modem. I don’t understand why the command ATDT deletes the two first number of the fax number.

Is someone have a config.ttySx for this modem please ? I’ve already test http://www.hylafax.org/archive/2000-06/msg00035.php but the modem doesn’t

initialize in class 2. Maybe my config file is bad.

 

Thanks for your helps.

 

----

azer.