HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
Re: [hylafax-users] Hylafax reception problem SOLVED
El mar, 02-09-2008 a las 05:32 -0700, Lee Howard escribió:
> Ing CIP. Alejandro Celi Mariátegui wrote:
> > Jul 18 15:06:33.89: [28891]: <-- [9:AT+FRH=3\r]
> > Jul 18 15:06:35.65: [28891]: --> [7:CONNECT]
> > Jul 18 15:06:36.85: [28891]: --> HDLC<9:FF 23 04 01 84 7C 00 FB
> > 35>
> > Jul 18 15:06:36.85: [28891]: --> [5:ERROR]
> >
> > Jul 18 15:07:09.17: [28891]: RECV: 836 total lines, 65 bad
> > lines, 13 consecutive bad lines
> > Jul 18 15:07:09.17: [28891]: RECV: REJECT page quality, 13-line
> > run (max 10)
> >
> > Jul 18 15:07:11.13: [28891]: RECV send RTN (retrain negative)
> >
> > I don't have any idea about what happen. All the faxes that I receive
> > have this type of errors. Can you help me?
>
> All of these indications are that the audio quality that IAXmodem is
> hearing is very poor. You can use the IAXmodem "record" feature (see
> README) to record the audio and examine it.
>
> Most likely it has to do with your hardware configuration or with actual
> timing problems with the PRI.
>
> Thanks,
>
> Lee.
Thank you for your help Lee.
This is the tip
rxgain=6
txgain=6
In zapata.conf file of Asterisk PBX and the fax begin to work fine. The
PRI output was low. Carrier problem.
Thank you very much
Regards,
--
Ing CIP. Alejandro Celi Mariátegui
<alex@xxxxxxxxxxxx>
--
Este mensaje ha sido analizado por MailScanner
en busca de virus y otros contenidos peligrosos,
y se considera que est� limpio.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*