Re: [hylafax-users] waiting for modem to come ready

[Enrique Arredondo <henry@xxxxxxxxxx>]

Enrique Arredondo wrote:
> David Forrest wrote:
> > On Thu, 28 Aug 2008, Enrique Arredondo wrote:
> >
> > > Hi I added a 2nd and 3rd modem to my RH server with faxaddmodem 
> > > command and basicaly here's what it configured ,but I can't make 
> > > these modems send faxes due to "waiting for modem to come ready" 
> > > status, any clues of what's wrong with this picture ?
> > >
> > > Hmm, this looks like a Class 1 modem.
> > > Product code (ATI0) is "5601".
> > > Other information (ATI3) is "U.S. Robotics 56K FAX USB V1.1.0".
> > > DTE-DCE flow control scheme [default]?
> > > Modem manufacturer is "3Com U. S. Robotics".
> > > Modem model is "3CP5610".
> > >
> > > Using prototype configuration file usr-xon...
> > >
> > > The modem configuration parameters are:
> > >
> > > ModemAnswerCmd:         AT+FCLASS=1A
> > > ModemFlowControl:       xonxoff
> > > ModemHardFlowCmd:       AT&H1&I0&R2
> > > ModemMfrQueryCmd:       !USR
> > > ModemModelQueryCmd:     ATI3
> > > ModemNoFlowCmd:         AT&H0&I0&R1
> > > ModemRate:              19200
> > > ModemResultCodesCmd:    ATQ0X4
> > > ModemRevQueryCmd:       ATI7
> > > ModemSetupAACmd:        AT+FCLASS=0
> > > ModemSetupDCDCmd:       AT&C1
> > > ModemSetupDTRCmd:       ATS13=1&D2
> > > ModemSoftFlowCmd:       AT&H2&I2&R1
> > > Class1NFLOCmd:          AT&H0&I0&R1
> > > Class1HFLOCmd:          AT&H1&I0&R2
> > > Class1SFLOCmd:          ""
> > > Class1ResponseWaitCmd:  AT+FRS=1
> > > Class1SwitchingCmd:     "<delay\0727>"
> > >
> > >
> > > [root@atkred etc]# faxstat
> > > HylaFAX scheduler on atkred.com: Running
> > > Modem ttyACM0 (+1.714.850.####): Waiting for modem to come ready
> > > Modem ttyACM1 (+1.714.850.####): Waiting for modem to come ready
> > > Modem ttyS0 (+1.714.850.####): Running and idle
> > >
> > >
> > > Once I figure this out, will hylafax do load balance automatically 
> > > on the 3 faxmodems ? or is there something else to configure ?
> > >
> > > thanks
> > >
> > > Enrique.
> >
> > Did you remember to start faxgettys on ttyACM0 & ttyACM1?
> >
> > David Forrest                     e-mail   drf@xxxxxxxxxxxxx
> > Maple Park Development Corporation  http://www.maplepark.com
> > St. Louis, Missouri

Ok I got them working now!!!! 2 USB USRobotics modems running off of 
REDHAT hylafax . I had to made special conif files for ACM0 and ACM1. 
Basically it's the removal of H1 yada yada AT commandas and change flow 
control to hardware.

Now my last question, How can I make a group so sendfax automatically 
selects the idle modem ? Or does it do it automatically ? What if 
several faxes have the same fax number, would hylafax send them 
together? Is that possible ?

THanks


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*