Re: [hylafax-users] Here got 3 Sample log file that HylaFAx cannot fax out

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

FOO SOON LOKE wrote:
> Aug 28 10:23:34.93: [ 7716]: SEND send PPS (partial page signal)
> Aug 28 10:23:34.93: [ 7716]: SEND send EOP (no more pages or documents)
> Aug 28 10:23:34.93: [ 7716]: <-- [9:AT+FRH=3\r]
> Aug 28 10:23:35.11: [ 7716]: --> [7:CONNECT]
> Aug 28 10:23:37.23: [ 7716]: --> [2:OK]
> Aug 28 10:23:37.23: [ 7716]: SEND recv PPR (partial page request)
> Aug 28 10:23:37.23: [ 7716]: DELAY 70 ms
> Aug 28 10:23:37.31: [ 7716]: SEND send frame number 60
> Aug 28 10:23:37.31: [ 7716]: SEND send frame number 61
> Aug 28 10:23:37.31: [ 7716]: SEND send frame number 62
> Aug 28 10:23:37.31: [ 7716]: SEND send frame number 63
> Aug 28 10:23:37.31: [ 7716]: SEND send frame number 64

Given that you are consistently needing to re-send frames 60-64 for 
every image data block, I would suspect that you're using the wrong flow 
control setting for your modem (or that your modem has broken flow control).

Make sure that the following items in your modem config file are 
correctly configured for your modem: ModemHardFlowCmd and 
ModemSoftFlowCmd.  And then change ModemFlowControl between "rtscts" and 
"xonxoff".

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*