[hylafax-users] Solaris x86 "T.30 T2 timeout, expected page not received" or "Missing EOL after 5 seconds" problem

[Ertan Küçükoğlu <ek@xxxxxxxxxxxxxxxx>]

Hello,

 

I have frequent hang of modem after switching to Solaris 10 Update 5 (7/08) x86 OS.

 

I recently switched my system from FreeBSD 7.0 to Solaris x86. All patches are applied to Solaris system. After this switch I got a lot of trouble because of hanging of the modem. My old MultiTech 56K ZDX modem started to freeze for some jobs. Below is a sample log from one of them. All available classes are tried until now. Modem is set as Class1 as this is the long lasting class before freezing.

 

What I observed is:

First below message comes from system. Then after 5 minutes I get “modem on /dev/cua0 appears wedged” e-mails from system. I manually power recycle the modem. Kill running faxgetty process. There is no lights blinking on the modem. Server cannot initialize the modem. Only solution on my side is to reboot the system. This reboot is a real big problem for me. This box is doing mail server, minor database server, fax server, web proxy jobs. Company connection to world is blocked for 2-5 minutes.

 

Also, when I setup modem for Class2 I read below lines in the log file, and I need to restart the server again like in Class1.

Aug 21 17:49:33.46: [  607]: RECV: Missing EOL after 5 seconds

Aug 21 17:49:33.46: [  607]: RECV: end page

 

I am using source compiled version of Hylafax 4.4.4.

 

Any help will be appreciated.

 

 

 

My log files are as follows:

 

recvq/fax000000165.tif (ftp://ana.ozlerplastik.com:4559/recvq/fax000000165.tif):

          Sender: <UNSPECIFIED>

           Pages: 2

         Quality: 100 lines/inch

            Size: ISO A4

        Received: 2008:08:26 11:50:18

 Time To Receive: 0:37

     Signal Rate: 14400 bit/s

     Data Format: 2-D MR

   Error Correct: No

         CallID1:

         CallID2:

     Received On: cua0

          CommID: 000000139 (ftp://ana.ozlerplastik.com:4559/log/c000000139)

 

 

bash-3.00# cat c000000139

Aug 26 11:50:03.73: [  598]: SESSION BEGIN 000000139 902124566697

Aug 26 11:50:03.73: [  598]: HylaFAX (tm) Version 4.4.4

Aug 26 11:50:03.73: [  598]: <-- [4:ATA\r]

Aug 26 11:50:09.04: [  598]: --> [7:CONNECT]

Aug 26 11:50:09.04: [  598]: ANSWER: FAX CONNECTION  DEVICE '/dev/cua0'

Aug 26 11:50:09.04: [  598]: RECV FAX: begin

Aug 26 11:50:09.04: [  598]: <-- data [32]

Aug 26 11:50:09.04: [  598]: <-- data [2]

Aug 26 11:50:11.06: [  598]: --> [7:CONNECT]

Aug 26 11:50:11.06: [  598]: <-- data [23]

Aug 26 11:50:11.06: [  598]: <-- data [2]

Aug 26 11:50:11.89: [  598]: --> [7:CONNECT]

Aug 26 11:50:11.89: [  598]: <-- data [13]

Aug 26 11:50:11.89: [  598]: <-- data [2]

Aug 26 11:50:12.54: [  598]: --> [2:OK]

Aug 26 11:50:12.54: [  598]: <-- [9:AT+FRH=3\r]

Aug 26 11:50:13.14: [  598]: --> [7:CONNECT]

Aug 26 11:50:14.11: [  598]: --> [2:OK]

Aug 26 11:50:14.11: [  598]: REMOTE wants 14400 bit/s

Aug 26 11:50:14.11: [  598]: REMOTE wants A4 page width (215 mm)

Aug 26 11:50:14.11: [  598]: REMOTE wants unlimited page length

Aug 26 11:50:14.11: [  598]: REMOTE wants 200 x 100 dpi

Aug 26 11:50:14.11: [  598]: REMOTE wants 2-D MR

Aug 26 11:50:14.11: [  598]: RECV recv DCS (command signal)

Aug 26 11:50:14.11: [  598]: RECV training at v.17 14400 bit/s

Aug 26 11:50:14.11: [  598]: <-- [11:AT+FRM=145\r]

Aug 26 11:50:15.85: [  598]: --> [7:CONNECT]

Aug 26 11:50:17.41: [  598]: RECV: TCF 2776 bytes, 1% non-zero, 2729 zero-run

Aug 26 11:50:17.41: [  598]: --> [10:NO CARRIER]

Aug 26 11:50:17.41: [  598]: <-- [9:AT+FRS=7\r]

Aug 26 11:50:17.50: [  598]: --> [2:OK]

Aug 26 11:50:17.50: [  598]: TRAINING succeeded

Aug 26 11:50:17.50: [  598]: <-- [9:AT+FTH=3\r]

Aug 26 11:50:17.55: [  598]: --> [7:CONNECT]

Aug 26 11:50:17.55: [  598]: <-- data [3]

Aug 26 11:50:17.55: [  598]: <-- data [2]

Aug 26 11:50:18.86: [  598]: --> [2:OK]

Aug 26 11:50:18.86: [  598]: <-- [11:AT+FRM=146\r]

Aug 26 11:50:19.74: [  598]: --> [7:CONNECT]

Aug 26 11:50:19.74: [  598]: RECV: begin page

Aug 26 11:50:46.25: [  598]: RECV: 1149 total lines, 0 bad lines, 0 consecutive bad lines

Aug 26 11:50:46.25: [  598]: RECV: end page

Aug 26 11:50:46.25: [  598]: --> [10:NO CARRIER]

Aug 26 11:50:46.25: [  598]: <-- [9:AT+FRH=3\r]

Aug 26 11:50:46.67: [  598]: --> [7:CONNECT]

Aug 26 11:50:47.39: [  598]: --> [2:OK]

Aug 26 11:50:47.39: [  598]: RECV recv MPS (more pages, same document)

Aug 26 11:50:47.39: [  598]: <-- [9:AT+FRS=7\r]

Aug 26 11:50:47.57: [  598]: --> [2:OK]

Aug 26 11:50:47.57: [  598]: <-- [9:AT+FTH=3\r]

Aug 26 11:50:47.71: [  598]: --> [7:CONNECT]

Aug 26 11:50:47.71: [  598]: RECV send MCF (message confirmation)

Aug 26 11:50:47.71: [  598]: <-- data [3]

Aug 26 11:50:47.71: [  598]: <-- data [2]

Aug 26 11:50:47.71: [  598]: RECV FAX (000000139): from <UNSPECIFIED>, page 1 in 0:37, INF, 200 x 100 dpi, 2-D MR, 14400 bit/s

Aug 26 11:50:49.03: [  598]: --> [2:OK]

Aug 26 11:50:49.03: [  598]: <-- [11:AT+FRM=146\r]

Aug 26 11:50:49.82: [  598]: --> [7:CONNECT]

Aug 26 11:50:49.82: [  598]: RECV: begin page

Aug 26 11:52:35.04: [  598]: <-- data [1]

Aug 26 11:52:35.04: [  598]: RECV: Missing EOL after 5 seconds

Aug 26 11:52:35.04: [  598]: RECV: end page

Aug 26 11:52:40.05: [  598]: MODEM <Timeout>

Aug 26 11:52:40.05: [  598]: <-- data [1]

Aug 26 11:52:40.26: [  598]: MODEM <Timeout>

Aug 26 11:52:40.26: [  598]: RECV keeping unconfirmed page

Aug 26 11:52:40.26: [  598]: RECV FAX: T.30 T2 timeout, expected page not received

Aug 26 11:52:40.26: [  598]: <-- [9:AT+FTH=3\r]

Aug 26 11:52:40.26: [  598]: RECV FAX (000000139): from <UNSPECIFIED>, page 2 in 0:37, INF, 200 x 100 dpi, 2-D MR, 14400 bit/s

Aug 26 11:52:40.26: [  598]: RECV FAX (000000139): recvq/fax000000165.tif from <UNSPECIFIED>, route to <unspecified>, 2 pages in 2:31

Aug 26 11:52:47.82: [  598]: --> [0:]

Aug 26 11:52:47.82: [  598]: RECV FAX (000000139): session with <UNSPECIFIED> terminated abnormally: T.30 T2 timeout, expected page not received

Aug 26 11:52:47.82: [  598]: RECV FAX: bin/faxrcvd "recvq/fax000000165.tif" "cua0" "000000139" "T.30 T2 timeout, expected page not received"

Aug 26 11:52:47.82: [  598]: RECV FAX: end

Aug 26 11:52:47.82: [  598]: T.30 T2 timeout, expected page not received

Aug 26 11:52:47.82: [  598]: SESSION END

bash-3.00#

 

 

İyi çalışmalar

Ertan Küçükoğlu