[hylafax-users] No response to EOP repeated 3 tries; Giving up after 3 attempts to send same page

[FOO SOON LOKE <fsloke@xxxxxxxxx>]

Hi all,

I just started to use HylaFax software

I did test the software using my local office Fax machine... I works!!!

My Office using the "9" extension to call out office phone...

Inside office no need to press "9"

When I try to fax outside office go through phone line... reach my friend house.... It didn't work.... :(

This Error stated: No response to EOP repeated 3 tries; Giving up after 3 attempts to send same page....

Here is the log::
[QUOTE]
tts:1218448415
killtime:1218458798
retrytime:0
state:8
npages:0
totpages:1
ntries:3
ndials:0
totdials:3
maxdials:12
tottries:3
maxtries:6
pagewidth:210
resolution:196
pagelength:297
priority:127
schedpri:125
minbr:0
desiredbr:13
desiredst:0
desiredec:2
desireddf:3
desiredtl:0
useccover:1
usexvres:0
external:951617775
number:951617775
mailaddr:fsloke@xxxxxxxxx
sender:csd01
jobid:12
jobtag:
pagehandling:61Z0784P
modem:ttyS0
faxnumber:
tsi:
receiver:
company:
location:
voice:
fromcompany:
fromlocation:
fromvoice:
regarding:
comments:
cover:
client:3.244.4.91
owner:csd01
groupid:12
signalrate:9600 bit/s
dataformat:2-D MR
jobtype:facsimile
tagline:
subaddr:
passwd:
doneop:default
commid:000000017
csi:++603 7999716
nsf:Equipment:Panasonic KX-F230/KX-FT21:Station:MASTURA       
status:No response to EOP repeated 3 tries; Giving up after 3 attempts to send same page
statuscode:999
returned:1
notify:when requeued
pagechop:default
chopthreshold:3
!pdf:0::docq/doc14.ps
[/QUOTE]

[QUOTE]
Aug 11 17:25:11.77: [14908]: SESSION BEGIN 000000009 603951617775
Aug 11 17:25:11.77: [14908]: HylaFAX (tm) Version 4.4.3
Aug 11 17:25:11.77: [14908]: SEND FAX: JOB 8 DEST 951617775 COMMID 000000009 DEVICE '/dev/ttyS0' FROM 'csd01 <Administrator@localhost>' USER csd01
Aug 11 17:25:11.77: [14908]: <-- [12:AT+FCLASS=1\r]
Aug 11 17:25:11.88: [14908]: --> [2:OK]
Aug 11 17:25:11.88: [14908]: DIAL 951617775
Aug 11 17:25:11.88: [14908]: <-- [14:ATDT951617775\r]
Aug 11 17:25:37.63: [14908]: --> [7:CONNECT]
Aug 11 17:25:39.66: [14908]: --> [2:OK]
Aug 11 17:25:39.66: [14908]: REMOTE NSF "00 00 0E 00 00 00 96 0F 01 03 00 10 05 02 85 C8 08 01 49 02 4B 41 53 54 55 52 49 20 20 20 20 20 20 20 20 20 03"
Aug 11 17:25:39.66: [14908]: NSF remote fax equipment: Panasonic KX-F230/KX-FT21
Aug 11 17:25:39.66: [14908]: NSF remote station ID: "Mastura         "
Aug 11 17:25:39.66: [14908]: <-- [9:AT+FRH=3\r]
Aug 11 17:25:39.67: [14908]: --> [7:CONNECT]
Aug 11 17:25:40.40: [14908]: --> [2:OK]
Aug 11 17:25:40.40: [14908]: REMOTE CSI "++603 7999716"
Aug 11 17:25:40.40: [14908]: <-- [9:AT+FRH=3\r]
Aug 11 17:25:40.42: [14908]: --> [7:CONNECT]
Aug 11 17:25:40.75: [14908]: --> [2:OK]
Aug 11 17:25:40.75: [14908]: REMOTE best rate 9600 bit/s
Aug 11 17:25:40.75: [14908]: REMOTE max A4 page width (215 mm)
Aug 11 17:25:40.75: [14908]: REMOTE max unlimited page length
Aug 11 17:25:40.75: [14908]: REMOTE best vres 7.7 line/mm
Aug 11 17:25:40.75: [14908]: REMOTE format support: MH, MR
Aug 11 17:25:40.75: [14908]: REMOTE best 20 ms/scanline
Aug 11 17:25:40.75: [14908]: USE 9600 bit/s
Aug 11 17:25:40.75: [14908]: SEND file "docq/doc10.ps;c1"
Aug 11 17:25:40.75: [14908]: USE A4 page width (215 mm)
Aug 11 17:25:40.75: [14908]: USE unlimited page length
Aug 11 17:25:40.75: [14908]: USE 7.7 line/mm
Aug 11 17:25:40.75: [14908]: USE 2-D MR
Aug 11 17:25:40.75: [14908]: USE 20 ms/scanline
Aug 11 17:25:40.75: [14908]: SEND training at v.29 9600 bit/s
Aug 11 17:25:40.75: [14908]: DELAY 70 ms
Aug 11 17:25:40.82: [14908]: <-- [9:AT+FTH=3\r]
Aug 11 17:25:40.87: [14908]: --> [7:CONNECT]
Aug 11 17:25:40.87: [14908]: <-- data [23]
Aug 11 17:25:40.87: [14908]: <-- data [2]
Aug 11 17:25:40.89: [14908]: --> [7:CONNECT]
Aug 11 17:25:40.89: [14908]: <-- data [6]
Aug 11 17:25:40.89: [14908]: <-- data [2]
Aug 11 17:25:43.06: [14908]: --> [2:OK]
Aug 11 17:25:43.06: [14908]: DELAY 70 ms
Aug 11 17:25:43.13: [14908]: <-- [10:AT+FTM=96\r]
Aug 11 17:25:43.65: [14908]: --> [7:CONNECT]
Aug 11 17:25:43.65: [14908]: <-- data [1024]
Aug 11 17:25:43.65: [14908]: <-- data [776]
Aug 11 17:25:43.65: [14908]: <-- data [2]
Aug 11 17:25:45.20: [14908]: --> [2:OK]
Aug 11 17:25:45.20: [14908]: <-- [9:AT+FRH=3\r]
Aug 11 17:25:46.02: [14908]: --> [7:CONNECT]
Aug 11 17:25:47.13: [14908]: --> [2:OK]
Aug 11 17:25:47.13: [14908]: TRAINING succeeded
Aug 11 17:25:47.13: [14908]: DELAY 70 ms
Aug 11 17:25:47.20: [14908]: <-- [10:AT+FTM=96\r]
Aug 11 17:25:47.79: [14908]: --> [7:CONNECT]
Aug 11 17:25:47.79: [14908]: SEND begin page
Aug 11 17:25:47.80: [14908]: Reading MMR-compressed image file
Aug 11 17:25:47.81: [14908]: <-- data [1027]
Aug 11 17:25:47.81: [14908]: <-- data [1030]
Aug 11 17:25:47.81: [14908]: <-- data [1030]
Aug 11 17:25:47.81: [14908]: <-- data [1025]
Aug 11 17:25:49.81: [14908]: <-- data [1024]
Aug 11 17:25:49.81: [14908]: <-- data [1030]
Aug 11 17:25:49.81: [14908]: <-- data [1028]
Aug 11 17:25:49.81: [14908]: <-- data [1028]
Aug 11 17:25:51.80: [14908]: <-- data [1026]
Aug 11 17:25:51.80: [14908]: <-- data [1032]
Aug 11 17:25:51.80: [14908]: <-- data [1030]
Aug 11 17:25:51.80: [14908]: <-- data [1027]
Aug 11 17:25:53.79: [14908]: <-- data [1024]
Aug 11 17:25:53.79: [14908]: <-- data [1024]
Aug 11 17:25:53.79: [14908]: <-- data [1028]
Aug 11 17:25:53.79: [14908]: <-- data [1025]
Aug 11 17:25:55.79: [14908]: <-- data [1025]
Aug 11 17:25:55.79: [14908]: <-- data [1027]
Aug 11 17:25:55.79: [14908]: <-- data [1024]
Aug 11 17:25:57.78: [14908]: <-- data [1025]
Aug 11 17:25:57.78: [14908]: <-- data [1025]
Aug 11 17:25:57.78: [14908]: <-- data [1026]
Aug 11 17:25:57.78: [14908]: <-- data [1024]
Aug 11 17:25:59.78: [14908]: <-- data [1029]
Aug 11 17:25:59.78: [14908]: <-- data [1028]
Aug 11 17:25:59.78: [14908]: <-- data [1026]
Aug 11 17:25:59.78: [14908]: <-- data [1025]
Aug 11 17:26:01.77: [14908]: <-- data [1028]
Aug 11 17:26:01.77: [14908]: <-- data [1026]
Aug 11 17:26:01.77: [14908]: <-- data [1028]
Aug 11 17:26:01.77: [14908]: <-- data [1026]
Aug 11 17:26:03.76: [14908]: <-- data [1026]
Aug 11 17:26:03.76: [14908]: <-- data [1029]
Aug 11 17:26:03.76: [14908]: <-- data [1027]
Aug 11 17:26:05.76: [14908]: <-- data [1026]
Aug 11 17:26:05.76: [14908]: <-- data [159]
Aug 11 17:26:05.76: [14908]: SENT 35999 bytes of data
Aug 11 17:26:05.76: [14908]: <-- data [1026]
Aug 11 17:26:05.76: [14908]: <-- data [1026]
Aug 11 17:26:05.76: [14908]: <-- data [1028]
Aug 11 17:26:07.75: [14908]: <-- data [1026]
Aug 11 17:26:07.75: [14908]: <-- data [1026]
Aug 11 17:26:07.75: [14908]: <-- data [1024]
Aug 11 17:26:07.75: [14908]: <-- data [558]
Aug 11 17:26:09.75: [14908]: SENT 6702 bytes of data
Aug 11 17:26:09.75: [14908]: SEND 2D RTC
Aug 11 17:26:09.75: [14908]: <-- data [30]
Aug 11 17:26:09.75: [14908]: <-- data [2]
Aug 11 17:26:09.75: [14908]: SEND end page
Aug 11 17:26:23.70: [14908]: --> [2:OK]
Aug 11 17:26:23.70: [14908]: DELAY 90 ms
Aug 11 17:26:23.79: [14908]: SEND send EOP (no more pages or documents)
Aug 11 17:26:23.79: [14908]: <-- [9:AT+FTH=3\r]
Aug 11 17:26:23.84: [14908]: --> [7:CONNECT]
Aug 11 17:26:23.84: [14908]: <-- data [3]
Aug 11 17:26:23.84: [14908]: <-- data [2]
Aug 11 17:26:25.16: [14908]: --> [2:OK]
Aug 11 17:26:25.16: [14908]: <-- [9:AT+FRH=3\r]
Aug 11 17:26:28.26: [14908]: --> [0:]
Aug 11 17:26:28.26: [14908]: MODEM <Empty line>
Aug 11 17:26:28.26: [14908]: <-- data [1]
Aug 11 17:26:28.46: [14908]: MODEM <Timeout>
Aug 11 17:26:28.46: [14908]: SEND send EOP (no more pages or documents)
Aug 11 17:26:28.46: [14908]: <-- [9:AT+FTH=3\r]
Aug 11 17:26:28.51: [14908]: --> [7:CONNECT]
Aug 11 17:26:28.51: [14908]: <-- data [3]
Aug 11 17:26:28.51: [14908]: <-- data [2]
Aug 11 17:26:29.82: [14908]: --> [2:OK]
Aug 11 17:26:29.82: [14908]: <-- [9:AT+FRH=3\r]
Aug 11 17:26:32.92: [14908]: --> [0:]
Aug 11 17:26:32.92: [14908]: MODEM <Empty line>
Aug 11 17:26:32.92: [14908]: <-- data [1]
Aug 11 17:26:33.12: [14908]: MODEM <Timeout>
Aug 11 17:26:33.12: [14908]: SEND send EOP (no more pages or documents)
Aug 11 17:26:33.12: [14908]: <-- [9:AT+FTH=3\r]
Aug 11 17:26:33.17: [14908]: --> [7:CONNECT]
Aug 11 17:26:33.17: [14908]: <-- data [3]
Aug 11 17:26:33.17: [14908]: <-- data [2]
Aug 11 17:26:34.49: [14908]: --> [2:OK]
Aug 11 17:26:34.49: [14908]: <-- [9:AT+FRH=3\r]
Aug 11 17:26:37.59: [14908]: --> [0:]
Aug 11 17:26:37.59: [14908]: MODEM <Empty line>
Aug 11 17:26:37.59: [14908]: <-- data [1]
Aug 11 17:26:37.79: [14908]: MODEM <Timeout>
Aug 11 17:26:37.79: [14908]: No response to EOP repeated 3 tries
Aug 11 17:26:37.79: [14908]: DELAY 70 ms
Aug 11 17:26:37.86: [14908]: <-- [9:AT+FTH=3\r]
Aug 11 17:26:37.91: [14908]: --> [7:CONNECT]
Aug 11 17:26:37.91: [14908]: <-- data [3]
Aug 11 17:26:37.91: [14908]: <-- data [2]
Aug 11 17:26:39.22: [14908]: --> [2:OK]
Aug 11 17:26:40.22: [14908]: <-- [5:ATH0\r]
Aug 11 17:26:40.32: [14908]: --> [10:NO CARRIER]
Aug 11 17:26:40.32: [14908]: MODEM No carrier
Aug 11 17:26:40.32: [14908]: SESSION END
[/QUOTE]

Ha.... What matter? Any idea?

Thank

-Henry