[hylafax-users] Hylafax & avantfax problem

["Bao" <bao@xxxxxxxxxxxx>]

Dear all,

 

I have installed Centos, and compiled Hylafax 4.4.4, then installed avantfax 3.0.7. All works fine except 2 things:

 

1.       Can not send outgoing fax. Hylafax can connect to other fax server, but for some reasons, it failt at [5:ATH0\r] with the error message [10:NO CARRIER] (see below)

2.       Avantfax can not update ttyS0 status. The status is always [Please wait], although command faxstat states the modem is idle.

 

Any support is highly recommended.

Thank you very much:

 

PS: Error message when sending fax:

 

Aug 05 14:49:23.52: [ 6670]: SESSION BEGIN 000000020 8488222222

Aug 05 14:49:23.52: [ 6670]: HylaFAX (tm) Version 4.4.4

Aug 05 14:49:23.52: [ 6670]: SEND FAX: JOB 5 DEST 8222222 COMMID 000000020 DEVICE '/dev/ttyS0' FROM 'bao <bao@xxxxxxxxxx>' USER bao

Aug 05 14:49:23.52: [ 6670]: <-- [12:AT+FCLASS=1\r]

Aug 05 14:49:23.63: [ 6670]: --> [2:OK]

Aug 05 14:49:23.63: [ 6670]: DIAL 8222222

Aug 05 14:49:23.63: [ 6670]: <-- [12:ATDT8222222\r]

Aug 05 14:49:35.39: [ 6670]: --> [7:CONNECT]

Aug 05 14:49:37.40: [ 6670]: --> [2:OK]

Aug 05 14:49:37.40: [ 6670]: REMOTE NSF "00 00 0E 00 00 00 96 FF 41 07 00 10 00 02 95 80 18 01 49 02 52 55 44 4F 4C 46 20 4C 49 45 54 5A 20 20 20 20 03"

Aug 05 14:49:37.40: [ 6670]: NSF remote fax equipment: Panasonic

Aug 05 14:49:37.40: [ 6670]: NSF remote station ID: "ABC Co.    "

Aug 05 14:49:37.40: [ 6670]: <-- [9:AT+FRH=3\r]

Aug 05 14:49:37.42: [ 6670]: --> [7:CONNECT]

Aug 05 14:49:38.15: [ 6670]: --> [2:OK]

Aug 05 14:49:38.15: [ 6670]: REMOTE CSI "8222222"

Aug 05 14:49:38.15: [ 6670]: <-- [9:AT+FRH=3\r]

Aug 05 14:49:38.16: [ 6670]: --> [7:CONNECT]

Aug 05 14:49:38.58: [ 6670]: --> [2:OK]

Aug 05 14:49:38.58: [ 6670]: REMOTE best rate 14400 bit/s

Aug 05 14:49:38.58: [ 6670]: REMOTE max A4 page width (215 mm)

Aug 05 14:49:38.58: [ 6670]: REMOTE max unlimited page length

Aug 05 14:49:38.58: [ 6670]: REMOTE best vres 15.4 line/mm

Aug 05 14:49:38.58: [ 6670]: REMOTE format support: MH, MR, MMR

Aug 05 14:49:38.58: [ 6670]: REMOTE supports T.30 Annex A, 256-byte ECM

Aug 05 14:49:38.58: [ 6670]: REMOTE best 0 ms/scanline

Aug 05 14:49:38.58: [ 6670]: USE 14400 bit/s

Aug 05 14:49:38.58: [ 6670]: USE error correction mode

Aug 05 14:49:38.58: [ 6670]: DELAY 70 ms

Aug 05 14:49:38.65: [ 6670]: <-- [9:AT+FTH=3\r]

Aug 05 14:49:38.69: [ 6670]: --> [7:CONNECT]

Aug 05 14:49:38.69: [ 6670]: <-- data [3]

Aug 05 14:49:38.69: [ 6670]: <-- data [2]

Aug 05 14:49:40.01: [ 6670]: --> [2:OK] Aug 05 14:49:41.01: [ 6670]: <-- [5:ATH0\r]

Aug 05 14:49:41.11: [ 6670]: --> [10:NO CARRIER]

Aug 05 14:49:41.11: [ 6670]: MODEM No carrier

Aug 05 14:49:41.11: [ 6670]: SESSION END

 

 

Best regards,

 

--------------------------------------------------------------------

Nguyen The Tran Bao

Network Administrator

Rudolf Lietz, Inc., Representative Office Vietnam

162 Pasteur, District 1, Ho Chi Minh City

Mobile : (+84) 908 176 861

Tel      : (+84 8) 8 295 215 ext. 208

Fax     : (+84 8) 8 244 550

EFax   : +1 775 582 4495 (USA)

--------------------------------------------------------------------