Re: [hylafax-users] Called Number in mail

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Daniele Gallarato wrote:
> I've succesfully installed Hylafax with t38modem and a Cisco VG.
> Faxes come to linux machine, then they are forwarded to different mail 
> addresses with FaxDispatch configuration.
> Only one little thing:
>
> I need that into email also appear called number, in template it 
> appears only sender number.
>
> I've made some test with config.ttyx and faxrcvd-success.txt, without 
> success.
>
> Any help would be appreciated :) 

The called number will come through along with Caller*ID.  According to 
config/t38modem...

#
# AT#CID=10 enables ANI/DNIS reporting between the
# first and second RINGs in the form:
#
#   RING
#   NMBR = <calling number>
#   NDID = <called number>
#   RING
#
#ModemResetCmds:        "AT#CID=10"     # enable ANI/DNIS reporting
#RingsBeforeAnswer:     2               # collect info between two RINGs
#CallIDPattern:         "NMBR = "       # pattern string for calling number
#CallIDPattern:         "NDID = "       # pattern string for called number

So just uncomment those last four lines in your modem config file, 
restart faxgetty, and then in FaxDispatch the called number will be 
$CALLID2.

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*