[hylafax-users] $DEVICE in FaxDispatch

[Marty Westra <marty@xxxxxxxxxxxxxxxx>]

Hello,

 

HylaFAX version 4.2.1 built Fri Feb  4 12:26:48 EST 2005 for i686-pc-linux-gnu on Redhat Fedora Core 4.

2 external US Robotics modems on ttyS0 and ttyS14.

 

I’ve had a single modem (ttyS0) for several years.  Added a second modem (ttyS14) and want to redirect all faxes that come in on this second modem to a particular email address.

 

Prior to adding this second modem, I was using the $SENDER case statement to direct faxes to the proper person, and this part still works fine after adding the second modem.  But it is totally ignoring the $DEVICE case statement.

 

Can anyone see anything blatantly wrong with this?  Any ideas how to fix it?

 

Thanks,

Marty Westra

Electronic Systems, Inc.

 

Here’s my FaxDispatch file (sanitized, of course):

case "$DEVICE" in

 ttyS14) SENDTO=xxxxxx@xxxxxxxxxxxxxxxx;;

 ttyS0)  SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;;

 *)      SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;;

esac

case "$SENDER" in

 *815*389*xxxx*)         SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;                 FILETYPE=tif;; 

 *61294xxxx *)           SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;               FILETYPE=tif;; 

 *952*946*xxxx*)         SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;               FILETYPE=tif;; 

 *141436xxxx*)          SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;               FILETYPE=tif;; 

 * xxxx*)                SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;               FILETYPE=tif;; 

 *734*722*xxxx*)         SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;               FILETYPE=tif;;

 *608*)                  SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;               FILETYPE=tif;; 

 *763391xxxx*)           SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;               FILETYPE=tif;; 

 *763*235*xxxx*)         SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;              FILETYPE=tif;; 

 *9763235xxxx*)          SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;              FILETYPE=tif;; 

 *763*595*xxxx*)         SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;              FILETYPE=tif;;

 *763*253*xxxx*)         SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;              FILETYPE=tif;;

 *763*253*xxxx*)         SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;              FILETYPE=tif;;

 *763*253*xxxx*)         SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;              FILETYPE=tif;;

 *1*605*338*xxxx*)       SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;                  FILETYPE=tif;;

 *338*xxxx*)             SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;                  FILETYPE=tif;;

 0)                      SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;                  FILETYPE=tif;; 

 *)                      SENDTO= xxxxxx@xxxxxxxxxxxxxxxx;     FILETYPE=tif;;

esac

 

 

--------------------------------------------------------
This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version.

Electronic Systems, Inc. - Sioux Falls, SD