[hylafax-users] Receive more than one page as fax

["chinmayee rathi" <chinmayee25@xxxxxxxxx>]

Hi,

I am new to Hylafax, currently I am able to send and receive one page as fax but if I try to send fax with cover page on the receiving side I don't see the fax 
document but just the cover page. However on the sending side both get transmitted, below is the send side log.

Jul 07 07:51:12.96: [18614]: SESSION BEGIN 000000283 14154151111111
Jul 07 07:51:12.96: [18614]: HylaFAX (tm) Version 4.5.gd430c01
Jul 07 07:51:12.96: [18614]: SEND FAX: JOB 34 DEST 4151111111 COMMID 000000283 DEVICE '/dev/ttyS1' FROM 'root <root@xxxxxxxxxxxxxxxxxxxxx>' USER root
Jul 07 07:51:12.96: [18614]: <-- [9:AT+FLO=1\r]
Jul 07 07:51:12.96: [18614]: --> [2:OK]
Jul 07 07:51:12.96: [18614]: <-- [9:AT+FPP=0\r]
Jul 07 07:51:12.97: [18614]: --> [2:OK]
Jul 07 07:51:12.97: [18614]: <-- [9:AT+FBO=0\r]
Jul 07 07:51:12.98: [18614]: --> [2:OK]
Jul 07 07:51:12.98: [18614]: <-- [10:AT+FCT=30\r]
Jul 07 07:51:12.99: [18614]: --> [2:OK]
Jul 07 07:51:12.99: [18614]: <-- [11:AT+FCQ=1,0\r]
Jul 07 07:51:13.00: [18614]: --> [2:OK]
Jul 07 07:51:13.00: [18614]: <-- [15:AT+FNR=1,1,1,1\r]
Jul 07 07:51:13.00: [18614]: --> [2:OK]
Jul 07 07:51:13.00: [18614]: <-- [13:AT+FAP=1,1,1\r]
Jul 07 07:51:13.01: [18614]: --> [2:OK]
Jul 07 07:51:13.01: [18614]: <-- [9:AT+FIE=0\r]
Jul 07 07:51:13.02: [18614]: --> [2:OK]
Jul 07 07:51:13.02: [18614]: <-- [25:AT+FCC=1,5,2,2,F,1,0,0,0\r]
Jul 07 07:51:13.03: [18614]: --> [2:OK]
Jul 07 07:51:13.03: [18614]: DIAL 4151111111
Jul 07 07:51:13.03: [18614]: <-- [15:ATDT4151111111\r]
Jul 07 07:51:30.16: [18614]: --> [4:+FCO]
Jul 07 07:51:30.22: [18614]: --> [112:+FNF:AD 00 51 5A 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00]
Jul 07 07:51:30.22: [18614]: REMOTE NSF "AD 00 51 5A 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00"
Jul 07 07:51:30.22: [18614]: NSF remote fax equipment: Telogy Networks
Jul 07 07:51:30.89: [18614]: --> [27:+FCI:"        NothingSetup"]
Jul 07 07:51:30.89: [18614]: REMOTE CSI "NothingSetup"
Jul 07 07:51:31.37: [18614]: --> [20:+FIS:1,3,2,2,3,1,0,0]
Jul 07 07:51:31.37: [18614]: --> [2:OK]
Jul 07 07:51:31.37: [18614]: REMOTE best rate 9600 bit/s
Jul 07 07:51:31.37: [18614]: REMOTE max A3 page width (303 mm)
Jul 07 07:51:31.37: [18614]: REMOTE max unlimited page length
Jul 07 07:51:31.37: [18614]: REMOTE best vres 7.7 line/mm
Jul 07 07:51:31.37: [18614]: REMOTE format support: MH, MR, MMR
Jul 07 07:51:31.37: [18614]: REMOTE supports T.30 Annex A, 256-byte ECM
Jul 07 07:51:31.37: [18614]: REMOTE best 0 ms/scanline
Jul 07 07:51:31.37: [18614]: USE 9600 bit/s
Jul 07 07:51:31.37: [18614]: USE error correction mode
Jul 07 07:51:31.37: [18614]: SEND file "docq/cover34;f0"
Jul 07 07:51:31.37: [18614]: USE A4 page width (215 mm)
Jul 07 07:51:31.37: [18614]: USE unlimited page length
Jul 07 07:51:31.37: [18614]: USE 3.85 line/mm
Jul 07 07:51:31.37: [18614]: USE 2-D MMR
Jul 07 07:51:31.37: [18614]: USE 0 ms/scanline
Jul 07 07:51:31.37: [18614]: <-- [25:AT+FIS=0,3,0,2,3,1,0,0,0\r]
Jul 07 07:51:31.38: [18614]: --> [2:OK]
Jul 07 07:51:31.38: [18614]: <-- [7:AT+FDT\r]
Jul 07 07:51:44.57: [18614]: --> [20:+FCS:0,2,0,2,3,1,0,0]
Jul 07 07:51:44.68: [18614]: --> [7:CONNECT]
Jul 07 07:51:44.68: [18614]: SEND begin page
Jul 07 07:51:44.68: [18614]: <-- data [1039]
Jul 07 07:51:44.68: [18614]: <-- data [1038]
Jul 07 07:51:44.68: [18614]: <-- data [1038]
Jul 07 07:51:44.68: [18614]: <-- data [481]
Jul 07 07:51:44.68: [18614]: SENT 3544 bytes of data
Jul 07 07:51:46.54: [18614]: SEND end page
Jul 07 07:51:46.54: [18614]: SEND send MPS (more pages, same document)
Jul 07 07:51:46.54: [18614]: <-- data [2]
Jul 07 07:51:53.71: [18614]: --> [2:OK]
Jul 07 07:51:53.71: [18614]: <-- [8:AT+FPS?\r]
Jul 07 07:51:53.72: [18614]: --> [2:01]
Jul 07 07:51:53.72: [18614]: --> [2:OK]
Jul 07 07:51:53.72: [18614]: SEND recv MCF (message confirmation)
Jul 07 07:51:53.72: [18614]: SEND FAX (000000283): FROM root@xxxxxxxxxxxxxxxxxxxxx TO 4151111111 (page 1 of 2 sent in 0:00:22)
Jul 07 07:51:53.72: [18614]: SEND FAX (000000283): FROM root@xxxxxxxxxxxxxxxxxxxxx TO 4151111111 (docq/cover34;f0 sent in 0:00:22)
Jul 07 07:51:54.73: [18614]: SEND file "docq/doc36.tif;f0"
Jul 07 07:51:54.73: [18614]: <-- [7:AT+FDT\r]
Jul 07 07:51:54.74: [18614]: --> [7:CONNECT]
Jul 07 07:51:54.74: [18614]: SEND begin page
Jul 07 07:51:54.76: [18614]: <-- data [1037]
Jul 07 07:51:54.76: [18614]: <-- data [1038]
Jul 07 07:51:54.76: [18614]: <-- data [1042]
Jul 07 07:51:54.76: [18614]: <-- data [1039]
Jul 07 07:51:55.32: [18614]: <-- data [1040]
Jul 07 07:51:55.32: [18614]: <-- data [1034]
Jul 07 07:51:55.37: [18614]: <-- data [1039]
Jul 07 07:51:56.16: [18614]: <-- data [1043]
Jul 07 07:51:56.42: [18614]: <-- data [1037]
Jul 07 07:51:56.70: [18614]: <-- data [1041]
Jul 07 07:51:56.91: [18614]: <-- data [1038]
Jul 07 07:51:57.27: [18614]: <-- data [1040]
Jul 07 07:51:57.55: [18614]: <-- data [1027]
Jul 07 07:51:57.85: [18614]: <-- data [1033]
Jul 07 07:51:58.13: [18614]: <-- data [1037]
Jul 07 07:51:58.40: [18614]: <-- data [1033]
Jul 07 07:51:58.66: [18614]: <-- data [1036]
Jul 07 07:51:58.94: [18614]: <-- data [1036]
Jul 07 07:51:59.27: [18614]: <-- data [1035]
Jul 07 07:51:59.56: [18614]: <-- data [1035]
Jul 07 07:51:59.84: [18614]: <-- data [1044]
Jul 07 07:52:00.15: [18614]: <-- data [1036]
Jul 07 07:52:00.34: [18614]: <-- data [1039]
Jul 07 07:52:00.61: [18614]: <-- data [1035]
Jul 07 07:52:00.90: [18614]: <-- data [1039]
Jul 07 07:52:01.19: [18614]: <-- data [1039]
Jul 07 07:52:01.59: [18614]: <-- data [1033]
Jul 07 07:52:01.76: [18614]: <-- data [1042]
Jul 07 07:52:02.11: [18614]: <-- data [1045]
Jul 07 07:52:02.37: [18614]: <-- data [1040]
Jul 07 07:52:02.79: [18614]: <-- data [1031]
Jul 07 07:52:02.90: [18614]: <-- data [560]
Jul 07 07:52:03.09: [18614]: SENT 32296 bytes of data
Jul 07 07:52:04.19: [18614]: SEND end page
Jul 07 07:52:04.19: [18614]: SEND send EOP (no more pages or documents)
Jul 07 07:52:04.19: [18614]: <-- data [2]
Jul 07 07:52:38.63: [18614]: --> [6:+FHS:0]
Jul 07 07:52:38.63: [18614]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Jul 07 07:52:39.08: [18614]: --> [2:OK]
Jul 07 07:52:39.08: [18614]: SEND recv MCF (message confirmation)
Jul 07 07:52:39.08: [18614]: SEND FAX (000000283): FROM root@xxxxxxxxxxxxxxxxxxxxx TO 4151111111 (page 2 of 2 sent in 0:00:45)
Jul 07 07:52:39.08: [18614]: SEND FAX (000000283): FROM root@xxxxxxxxxxxxxxxxxxxxx TO 4151111111 (docq/doc36.tif;f0 sent in 0:00:45)
Jul 07 07:52:41.09: [18614]: <-- [5:ATH0\r]
Jul 07 07:52:41.33: [18614]: --> [2:OK]
Jul 07 07:52:41.33: [18614]: SESSION END

Any help is greatly appreciated!

Thanks,
Chinmayee