Re: [hylafax-users] Cannot send faxes to remote devices

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

madalin mihaila wrote:
> I'm using CentOS 5, HylaFax 4.4.4-1, Winprint, internal modem (Intel 
> 536ep chipset) with drivers from linmodems.
>
>
> Jun 20 13:25:42.94: [ 2226]: REMOTE CSI "40244XXXXXX"
> Jun 20 13:25:42.94: [ 2226]: <-- [9:AT+FRH=3\r]
> Jun 20 13:25:43.00: [ 2226]: --> [7:CONNECT]
> Jun 20 13:25:43.27: [ 2226]: --> [2:OK]
> Jun 20 13:25:43.27: [ 2226]: REMOTE best rate 14400 bit/s
> Jun 20 13:25:43.27: [ 2226]: REMOTE max A4 page width (215 mm)
> Jun 20 13:25:43.27: [ 2226]: REMOTE max unlimited page length
> Jun 20 13:25:43.27: [ 2226]: REMOTE best vres 15.4 line/mm
> Jun 20 13:25:43.27: [ 2226]: REMOTE format support: MH, MR, MMR
> Jun 20 13:25:43.27: [ 2226]: REMOTE supports T.30 Annex A, 256-byte ECM
> Jun 20 13:25:43.27: [ 2226]: REMOTE best 10 ms/scanline
> Jun 20 13:25:43.27: [ 2226]: USE 14400 bit/s
> Jun 20 13:25:43.27: [ 2226]: USE error correction mode
> Jun 20 13:25:43.27: [ 2226]: <-- [9:AT+FRS=7\r]
> Jun 20 13:25:43.34: [ 2226]: --> [2:OK]
> Jun 20 13:25:43.34: [ 2226]: <-- [9:AT+FTH=3\r]
> Jun 20 13:25:43.41: [ 2226]: --> [7:CONNECT]
> Jun 20 13:25:43.41: [ 2226]: <-- data [3]
> Jun 20 13:25:43.41: [ 2226]: <-- data [2]
> Jun 20 13:25:44.65: [ 2226]: --> [2:OK]
> Jun 20 13:25:45.65: [ 2226]: <-- [5:ATH0\r]
> Jun 20 13:25:46.20: [ 2226]: --> [2:OK]
> Jun 20 13:25:46.20: [ 2226]: SESSION END

HylaFAX (specifically faxsend) does this when the file it has to send is 
not faxable.

The root cause is probably that you're using the wrong print driver with 
Winprint.

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*