HylaFAX The world's most advanced open source fax server
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] IAXmodem + Hylafax receive problem

I am running an asterisk installation (v. 1.4.8) with the latest versions of hylafax and iaxmodem. I am testing this setup with two different analog fax machines at two different locations. Sometimes it works fine, but 9 times out of 10, I will only receive a couple pages of the fax. The error message in the log file appears to be receiving a DCN message, and from what I've read in other people's posts is that this would indicate the sending machine canceling the transmission. I have verified that there were no page feed errors or any other problem on the sending side during these tests. Does this look like a line problem, or a configuration issue?


Here is a copy of the log file:

May 02 14:11:09.92: [ 3136]: SESSION BEGIN 000000100 +18005551212
May 02 14:11:09.92: [ 3136]: HylaFAX (tm) Version 5.2.3
May 02 14:11:09.92: [ 3136]: CallID: '6024412815' '' '<NONE>' 's'
May 02 14:11:09.92: [ 3136]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
May 02 14:11:09.92: [ 3136]: <-- [4:ATA\r]
May 02 14:11:13.64: [ 3136]: --> [7:CONNECT]
May 02 14:11:13.64: [ 3136]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyIAX1'
May 02 14:11:13.64: [ 3136]: STATE CHANGE: ANSWERING -> RECEIVING
May 02 14:11:13.64: [ 3136]: RECV FAX: begin
May 02 14:11:13.64: [ 3136]: <-- data [32]
May 02 14:11:13.64: [ 3136]: <-- data [2]
May 02 14:11:14.56: [ 3136]: --> [7:CONNECT]
May 02 14:11:14.56: [ 3136]: <-- HDLC<23:FF C0 02 B6 A6 26 F6 B6 1A 82 92 04 04 04 04 04 04 04 04 04 04 04 04>
May 02 14:11:14.56: [ 3136]: <-- data [23]
May 02 14:11:14.56: [ 3136]: <-- data [2]
May 02 14:11:15.32: [ 3136]: --> [7:CONNECT]
May 02 14:11:15.32: [ 3136]: <-- HDLC<13:FF C8 01 00 77 5F 23 01 FB C1 01 01 18>
May 02 14:11:15.32: [ 3136]: <-- data [13]
May 02 14:11:15.32: [ 3136]: <-- data [2]
May 02 14:11:15.90: [ 3136]: --> [2:OK]
May 02 14:11:15.90: [ 3136]: <-- [9:AT+FRH=3\r]
May 02 14:11:22.90: [ 3136]: --> [0:]
May 02 14:11:22.90: [ 3136]: MODEM <Empty line>
May 02 14:11:22.90: [ 3136]: MODEM TIMEOUT: waiting for v.21 carrier
May 02 14:11:22.90: [ 3136]: <-- data [1]
May 02 14:11:22.92: [ 3136]: --> [2:OK]
May 02 14:11:22.92: [ 3136]: <-- [9:AT+FRS=7\r]
May 02 14:11:22.94: [ 3136]: --> [2:OK]
May 02 14:11:22.94: [ 3136]: <-- [9:AT+FTH=3\r]
May 02 14:11:22.96: [ 3136]: --> [7:CONNECT]
May 02 14:11:22.96: [ 3136]: <-- data [32]
May 02 14:11:22.96: [ 3136]: <-- data [2]
May 02 14:11:24.74: [ 3136]: --> [7:CONNECT]
May 02 14:11:24.74: [ 3136]: <-- HDLC<23:FF C0 02 B6 A6 26 F6 B6 1A 82 92 04 04 04 04 04 04 04 04 04 04 04 04>
May 02 14:11:24.74: [ 3136]: <-- data [23]
May 02 14:11:24.74: [ 3136]: <-- data [2]
May 02 14:11:25.48: [ 3136]: --> [7:CONNECT]
May 02 14:11:25.48: [ 3136]: <-- HDLC<13:FF C8 01 00 77 5F 23 01 FB C1 01 01 18>
May 02 14:11:25.48: [ 3136]: <-- data [13]
May 02 14:11:25.48: [ 3136]: <-- data [2]
May 02 14:11:26.06: [ 3136]: --> [2:OK]
May 02 14:11:26.06: [ 3136]: <-- [9:AT+FRH=3\r]
May 02 14:11:27.10: [ 3136]: --> [7:CONNECT]
May 02 14:11:28.68: [ 3136]: --> HDLC<25:FF C0 C2 0C 8C 2C 9C 2C 1C EC 0C 1C 2C 04 04 04 04 04 04 04 04 04 04 40 E3>
May 02 14:11:28.68: [ 3136]: --> [2:OK]
May 02 14:11:28.68: [ 3136]: RECV recv TSI (sender id)
May 02 14:11:28.68: [ 3136]: REMOTE TSI "4807849410"
May 02 14:11:28.68: [ 3136]: <-- [9:AT+FRH=3\r]
May 02 14:11:29.12: [ 3136]: --> [7:CONNECT]
May 02 14:11:29.12: [ 3136]: --> HDLC<15:FF C8 C1 00 46 1F 23 01 01 01 01 01 00 71 65>
May 02 14:11:29.22: [ 3136]: --> [2:OK]
May 02 14:11:29.22: [ 3136]: RECV recv DCS (command signal)
May 02 14:11:29.22: [ 3136]: REMOTE wants 14400 bit/s
May 02 14:11:29.22: [ 3136]: REMOTE wants A4 page width (215 mm)
May 02 14:11:29.22: [ 3136]: REMOTE wants unlimited page length
May 02 14:11:29.22: [ 3136]: REMOTE wants 7.7 line/mm
May 02 14:11:29.22: [ 3136]: REMOTE wants 2-D MMR
May 02 14:11:29.22: [ 3136]: REMOTE wants T.30 Annex A, 256-byte ECM
May 02 14:11:29.22: [ 3136]: RECV training at v.17 14400 bit/s
May 02 14:11:29.22: [ 3136]: MODEM set XON/XOFF/DRAIN: input ignored, output generated
May 02 14:11:29.22: [ 3136]: <-- [11:AT+FRM=145\r]
May 02 14:11:30.88: [ 3136]: --> [7:CONNECT]
May 02 14:11:32.32: [ 3136]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
May 02 14:11:32.32: [ 3136]: RECV: TCF 2587 bytes, 0% non-zero, 2557 zero-run
May 02 14:11:32.32: [ 3136]: --> [10:NO CARRIER]
May 02 14:11:32.32: [ 3136]: <-- [9:AT+FRS=7\r]
May 02 14:11:32.38: [ 3136]: --> [2:OK]
May 02 14:11:32.38: [ 3136]: TRAINING succeeded
May 02 14:11:32.38: [ 3136]: <-- [9:AT+FTH=3\r]
May 02 14:11:32.40: [ 3136]: --> [7:CONNECT]
May 02 14:11:32.40: [ 3136]: <-- HDLC<3:FF C8 21>
May 02 14:11:32.40: [ 3136]: <-- data [3]
May 02 14:11:32.40: [ 3136]: <-- data [2]
May 02 14:11:33.48: [ 3136]: --> [2:OK]
May 02 14:11:33.48: [ 3136]: <-- [11:AT+FRM=146\r]
May 02 14:11:34.88: [ 3136]: --> [7:CONNECT]
May 02 14:11:34.88: [ 3136]: MODEM input buffering enabled
May 02 14:11:34.88: [ 3136]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
May 02 14:11:37.38: [ 3136]: RECV received frame number 0
May 02 14:11:37.64: [ 3136]: RECV received frame number 1
May 02 14:11:37.78: [ 3136]: RECV received frame number 2
May 02 14:11:37.92: [ 3136]: RECV received frame number 3
May 02 14:11:38.06: [ 3136]: RECV received frame number 4
May 02 14:11:38.20: [ 3136]: RECV received frame number 5
May 02 14:11:38.34: [ 3136]: RECV received frame number 6
May 02 14:11:38.48: [ 3136]: RECV received frame number 7
May 02 14:11:38.62: [ 3136]: RECV received frame number 8
May 02 14:11:38.74: [ 3136]: RECV received frame number 9
May 02 14:11:38.88: [ 3136]: RECV received frame number 10
May 02 14:11:39.02: [ 3136]: RECV received frame number 11
May 02 14:11:39.30: [ 3136]: RECV received frame number 12
May 02 14:11:39.44: [ 3136]: RECV received frame number 13
May 02 14:11:39.58: [ 3136]: RECV received frame number 14
May 02 14:11:39.72: [ 3136]: RECV received frame number 15
May 02 14:11:39.86: [ 3136]: RECV received frame number 16
May 02 14:11:39.98: [ 3136]: RECV received frame number 17
May 02 14:11:40.12: [ 3136]: RECV received frame number 18
May 02 14:11:40.26: [ 3136]: RECV received frame number 19
May 02 14:11:40.40: [ 3136]: HDLC frame not byte-oriented. Trailing byte: 0xf8
May 02 14:11:40.40: [ 3136]: HDLC frame not byte-oriented. Trailing byte: 0xe0
May 02 14:11:40.68: [ 3136]: RECV received frame number 22
May 02 14:11:40.82: [ 3136]: RECV received frame number 23
May 02 14:11:40.96: [ 3136]: RECV received frame number 24
May 02 14:11:41.22: [ 3136]: RECV received frame number 25
May 02 14:11:41.64: [ 3136]: RECV received frame number 28
May 02 14:11:41.78: [ 3136]: RECV received frame number 29
May 02 14:11:41.92: [ 3136]: RECV received frame number 30
May 02 14:11:42.06: [ 3136]: RECV received frame number 31
May 02 14:11:51.50: [ 3136]: RECV received frame number 32
May 02 14:12:01.46: [ 3136]: RECV received frame number 33
May 02 14:12:01.46: [ 3136]: RECV received RCP frame
May 02 14:12:01.46: [ 3136]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
May 02 14:12:01.46: [ 3136]: MODEM input buffering disabled
May 02 14:12:01.46: [ 3136]: --> [10:NO CARRIER]
May 02 14:12:01.46: [ 3136]: <-- [9:AT+FRH=3\r]
May 02 14:12:01.68: [ 3136]: --> [7:CONNECT]
May 02 14:12:02.84: [ 3136]: --> HDLC<9:FF C8 FD F2 00 00 84 A5 37>
May 02 14:12:02.94: [ 3136]: --> [2:OK]
May 02 14:12:02.94: [ 3136]: RECV recv PPS (partial page signal)
May 02 14:12:02.94: [ 3136]: RECV recv MPS (more pages, same document)
May 02 14:12:02.94: [ 3136]: RECV received 34 frames of block 1 of page 1
May 02 14:12:02.94: [ 3136]: <-- [9:AT+FRS=7\r]
May 02 14:12:03.00: [ 3136]: --> [2:OK]
May 02 14:12:03.00: [ 3136]: <-- [9:AT+FTH=3\r]
May 02 14:12:03.02: [ 3136]: --> [7:CONNECT]
May 02 14:12:03.02: [ 3136]: <-- data [35]
May 02 14:12:03.02: [ 3136]: <-- data [2]
May 02 14:12:05.08: [ 3136]: --> [2:OK]
May 02 14:12:05.08: [ 3136]: RECV send PPR (partial page request)
May 02 14:12:05.08: [ 3136]: <-- [11:AT+FRM=146\r]
May 02 14:12:06.44: [ 3136]: --> [7:CONNECT]
May 02 14:12:06.86: [ 3136]: RECV received frame number 20
May 02 14:12:07.00: [ 3136]: RECV received frame number 21
May 02 14:12:07.00: [ 3136]: RECV received RCP frame
May 02 14:12:07.00: [ 3136]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
May 02 14:12:07.00: [ 3136]: MODEM input buffering disabled
May 02 14:12:07.04: [ 3136]: --> [10:NO CARRIER]
May 02 14:12:07.04: [ 3136]: <-- [9:AT+FRH=3\r]
May 02 14:12:07.34: [ 3136]: --> [7:CONNECT]
May 02 14:12:08.42: [ 3136]: --> HDLC<9:FF C8 FD F2 00 00 80 E5 B3>
May 02 14:12:08.52: [ 3136]: --> [2:OK]
May 02 14:12:08.52: [ 3136]: RECV recv PPS (partial page signal)
May 02 14:12:08.52: [ 3136]: RECV recv MPS (more pages, same document)
May 02 14:12:08.52: [ 3136]: RECV received 2 frames of block 1 of page 1
May 02 14:12:08.54: [ 3136]: RECV/CQ: Adjusting for EOFB at row 2140
May 02 14:12:08.54: [ 3136]: RECV: 8451 bytes of data, 2140 total lines
May 02 14:12:08.54: [ 3136]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
May 02 14:12:08.54: [ 3136]: <-- [9:AT+FRS=7\r]
May 02 14:12:08.60: [ 3136]: --> [2:OK]
May 02 14:12:08.60: [ 3136]: RECV send MCF (message confirmation)
May 02 14:12:08.60: [ 3136]: <-- [9:AT+FTH=3\r]
May 02 14:12:08.62: [ 3136]: --> [7:CONNECT]
May 02 14:12:08.62: [ 3136]: <-- HDLC<3:FF C8 31>
May 02 14:12:08.62: [ 3136]: <-- data [3]
May 02 14:12:08.62: [ 3136]: <-- data [2]
May 02 14:12:09.70: [ 3136]: --> [2:OK]
May 02 14:12:09.70: [ 3136]: <-- [11:AT+FRM=146\r]
May 02 14:12:11.10: [ 3136]: --> [7:CONNECT]
May 02 14:12:11.10: [ 3136]: MODEM input buffering enabled
May 02 14:12:11.10: [ 3136]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
May 02 14:12:11.24: [ 3136]: HDLC frame not byte-oriented. Trailing byte: 0xfc
May 02 14:12:11.50: [ 3136]: RECV received frame number 0
May 02 14:12:11.64: [ 3136]: RECV received frame number 1
May 02 14:12:11.92: [ 3136]: RECV received frame number 2
May 02 14:12:12.06: [ 3136]: RECV received frame number 3
May 02 14:12:12.20: [ 3136]: RECV received frame number 4
May 02 14:12:12.34: [ 3136]: RECV received frame number 5
May 02 14:12:12.48: [ 3136]: RECV received frame number 6
May 02 14:12:12.60: [ 3136]: RECV received frame number 7
May 02 14:12:12.74: [ 3136]: RECV received frame number 8
May 02 14:12:12.88: [ 3136]: RECV received frame number 9
May 02 14:12:13.02: [ 3136]: RECV received frame number 10
May 02 14:12:13.58: [ 3136]: HDLC frame not byte-oriented. Trailing byte: 0
May 02 14:12:13.72: [ 3136]: HDLC frame with bad address field 0xf2
May 02 14:12:13.86: [ 3136]: HDLC frame not byte-oriented. Trailing byte: 0xc0
May 02 14:12:13.86: [ 3136]: HDLC frame not byte-oriented. Trailing byte: 0xf0
May 02 14:12:14.28: [ 3136]: Bad HDLC terminating flag received.
May 02 14:12:19.82: [ 3136]: RECV received frame number 11
May 02 14:12:25.80: [ 3136]: RECV received frame number 12
May 02 14:12:26.34: [ 3136]: RECV received frame number 15
May 02 14:12:26.42: [ 3136]: RECV received frame number 16
May 02 14:12:26.42: [ 3136]: RECV received RCP frame
May 02 14:12:26.42: [ 3136]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
May 02 14:12:26.42: [ 3136]: MODEM input buffering disabled
May 02 14:12:26.42: [ 3136]: --> [10:NO CARRIER]
May 02 14:12:26.42: [ 3136]: <-- [9:AT+FRH=3\r]
May 02 14:12:27.08: [ 3136]: --> [7:CONNECT]
May 02 14:12:27.82: [ 3136]: --> HDLC<9:FF C8 FD F2 80 00 08 CE 69>
May 02 14:12:27.92: [ 3136]: --> [2:OK]
May 02 14:12:27.92: [ 3136]: RECV recv PPS (partial page signal)
May 02 14:12:27.92: [ 3136]: RECV recv MPS (more pages, same document)
May 02 14:12:27.92: [ 3136]: RECV received 17 frames of block 1 of page 2
May 02 14:12:27.93: [ 3136]: RECV/CQ: Adjusting for EOFB at row 2140
May 02 14:12:27.93: [ 3136]: RECV: 4139 bytes of data, 2140 total lines
May 02 14:12:27.93: [ 3136]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
May 02 14:12:27.93: [ 3136]: <-- [9:AT+FRS=7\r]
May 02 14:12:27.98: [ 3136]: --> [2:OK]
May 02 14:12:27.98: [ 3136]: RECV send MCF (message confirmation)
May 02 14:12:27.98: [ 3136]: <-- [9:AT+FTH=3\r]
May 02 14:12:28.00: [ 3136]: --> [7:CONNECT]
May 02 14:12:28.00: [ 3136]: <-- HDLC<3:FF C8 31>
May 02 14:12:28.00: [ 3136]: <-- data [3]
May 02 14:12:28.00: [ 3136]: <-- data [2]
May 02 14:12:29.06: [ 3136]: --> [2:OK]
May 02 14:12:29.06: [ 3136]: <-- [11:AT+FRM=146\r]
May 02 14:12:30.44: [ 3136]: --> [7:CONNECT]
May 02 14:12:30.44: [ 3136]: MODEM input buffering enabled
May 02 14:12:30.44: [ 3136]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
May 02 14:12:30.86: [ 3136]: RECV received frame number 0
May 02 14:12:31.00: [ 3136]: RECV received frame number 1
May 02 14:12:31.26: [ 3136]: RECV received frame number 2
May 02 14:12:31.40: [ 3136]: RECV received frame number 3
May 02 14:12:31.54: [ 3136]: RECV received frame number 4
May 02 14:12:31.68: [ 3136]: RECV received frame number 5
May 02 14:12:31.82: [ 3136]: RECV received frame number 6
May 02 14:12:31.96: [ 3136]: RECV received frame number 7
May 02 14:12:32.08: [ 3136]: RECV received frame number 8
May 02 14:12:32.22: [ 3136]: RECV received frame number 9
May 02 14:12:32.36: [ 3136]: RECV received frame number 10
May 02 14:12:32.50: [ 3136]: RECV received frame number 11
May 02 14:12:32.64: [ 3136]: RECV received frame number 12
May 02 14:12:32.78: [ 3136]: RECV received frame number 13
May 02 14:12:33.06: [ 3136]: RECV received frame number 14
May 02 14:12:33.20: [ 3136]: RECV received frame number 15
May 02 14:12:33.20: [ 3136]: HDLC frame not byte-oriented. Trailing byte: 0xe0
May 02 14:12:33.32: [ 3136]: HDLC frame not byte-oriented. Trailing byte: 0
May 02 14:12:33.60: [ 3136]: RECV received frame number 18
May 02 14:12:33.74: [ 3136]: HDLC frame not byte-oriented. Trailing byte: 0xc0
May 02 14:12:33.88: [ 3136]: HDLC frame not byte-oriented. Trailing byte: 0xfc
May 02 14:12:34.02: [ 3136]: RECV received frame number 21
May 02 14:12:34.16: [ 3136]: RECV received frame number 22
May 02 14:12:34.30: [ 3136]: RECV received frame number 23
May 02 14:12:34.44: [ 3136]: Bad HDLC terminating flag received.
May 02 14:12:34.98: [ 3136]: RECV received frame number 27
May 02 14:12:35.12: [ 3136]: RECV received frame number 28
May 02 14:12:35.26: [ 3136]: RECV received frame number 29
May 02 14:12:35.40: [ 3136]: RECV received frame number 30
May 02 14:12:44.14: [ 3136]: RECV received frame number 31
May 02 14:12:50.12: [ 3136]: RECV received frame number 32
May 02 14:12:50.12: [ 3136]: RECV received RCP frame
May 02 14:12:50.12: [ 3136]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
May 02 14:12:50.12: [ 3136]: MODEM input buffering disabled
May 02 14:12:50.16: [ 3136]: --> [10:NO CARRIER]
May 02 14:12:50.16: [ 3136]: <-- [9:AT+FRH=3\r]
May 02 14:12:50.38: [ 3136]: --> [7:CONNECT]
May 02 14:12:51.54: [ 3136]: --> HDLC<9:FF C8 FD F2 40 00 04 29 12>
May 02 14:12:51.64: [ 3136]: --> [2:OK]
May 02 14:12:51.64: [ 3136]: RECV recv PPS (partial page signal)
May 02 14:12:51.64: [ 3136]: RECV recv MPS (more pages, same document)
May 02 14:12:51.70: [ 3136]: --> [2:OK]
May 02 14:12:51.70: [ 3136]: <-- [9:AT+FTH=3\r]
May 02 14:12:51.72: [ 3136]: --> [7:CONNECT]
May 02 14:12:51.72: [ 3136]: <-- data [35]
May 02 14:12:51.72: [ 3136]: <-- data [2]
May 02 14:12:53.76: [ 3136]: --> [2:OK]
May 02 14:12:53.76: [ 3136]: RECV send PPR (partial page request)
May 02 14:12:53.76: [ 3136]: <-- [11:AT+FRM=146\r]
May 02 14:12:54.36: [ 3136]: --> [6:+FRH:3]
May 02 14:12:54.36: [ 3136]: --> [7:CONNECT]
May 02 14:12:55.52: [ 3136]: --> HDLC<9:FF C8 FD F2 40 00 04 29 12>
May 02 14:12:55.62: [ 3136]: --> [2:OK]
May 02 14:12:55.62: [ 3136]: RECV recv PPS (partial page signal)
May 02 14:12:55.62: [ 3136]: RECV recv MPS (more pages, same document)
May 02 14:12:55.70: [ 3136]: --> [2:OK]
May 02 14:12:55.70: [ 3136]: <-- [9:AT+FTH=3\r]
May 02 14:12:55.72: [ 3136]: --> [7:CONNECT]
May 02 14:12:55.72: [ 3136]: <-- data [35]
May 02 14:12:55.72: [ 3136]: <-- data [2]
May 02 14:12:57.78: [ 3136]: --> [2:OK]
May 02 14:12:57.78: [ 3136]: RECV send PPR (partial page request)
May 02 14:12:57.78: [ 3136]: <-- [11:AT+FRM=146\r]
May 02 14:12:58.40: [ 3136]: --> [6:+FRH:3]
May 02 14:12:58.40: [ 3136]: --> [7:CONNECT]
May 02 14:12:59.56: [ 3136]: --> HDLC<9:FF C8 FD F2 40 00 04 29 12>
May 02 14:12:59.66: [ 3136]: --> [2:OK]
May 02 14:12:59.66: [ 3136]: RECV recv PPS (partial page signal)
May 02 14:12:59.72: [ 3136]: <-- [9:AT+FTH=3\r]
May 02 14:12:59.74: [ 3136]: --> [7:CONNECT]
May 02 14:13:01.80: [ 3136]: --> [2:OK]
May 02 14:13:01.80: [ 3136]: RECV send PPR (partial page request)
May 02 14:13:01.80: [ 3136]: <-- [11:AT+FRM=146\r]
May 02 14:13:02.38: [ 3136]: --> [6:+FRH:3]
May 02 14:13:02.38: [ 3136]: --> [7:CONNECT]
May 02 14:13:03.42: [ 3136]: --> HDLC<5:FF C8 DF 59 6F>
May 02 14:13:03.56: [ 3136]: --> [2:OK]
May 02 14:13:03.56: [ 3136]: RECV recv DCN (disconnect)
May 02 14:13:03.56: [ 3136]: COMREC received DCN (sender abort) {E108}
May 02 14:13:03.58: [ 3136]: RECV/CQ: Adjusting for EOFB at row 501
May 02 14:13:03.58: [ 3136]: RECV: 8448 bytes of data, 501 total lines
May 02 14:13:03.58: [ 3136]: RECV keeping unconfirmed page
May 02 14:13:03.58: [ 3136]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
May 02 14:13:03.59: [ 3136]: RECV FAX (000000100): from 4807849410, page 3 in 0:00:36, INF, 7.7 line/mm, 2-D MMR, 14400
bit/s
May 02 14:13:04.59: [ 3136]: RECV FAX (000000100): recvq/fax000000067.tif from 4807849410, subaddress <unspecified>, 3
pages in 0:01:50
May 02 14:13:04.59: [ 3136]: RECV FAX: COMREC received DCN (sender abort) {E108}
May 02 14:13:04.59: [ 3136]: MODEM input buffering enabled
May 02 14:13:04.59: [ 3136]: RECV FAX (000000100): session with 4807849410 terminated abnormally: COMREC received DCN (
sender abort) {E108}
May 02 14:13:04.59: [ 3136]: RECV FAX: bin/faxrcvd 'recvq/fax000000067.tif' 'ttyIAX1' '000000100' 'COMREC received DCN
(sender abort) {E108}' '6024412815' '' '<NONE>' 's'
May 02 14:13:04.59: [ 3136]: RECV FAX: end
May 02 14:13:04.59: [ 3136]: SESSION END



Here is my modem config (pretty much the default):

CountryCode:            1
AreaCode:               800
FAXNumber:              +1.800.555.1212
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          0xFFF
SessionTracing:         0xFFF
RecvFileMode:           0777
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "IAXmodem"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           200
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class1          # use this to supply a hint

#
# Enabling this will use the hfaxd-protocol to set Caller*ID
#
#ModemSetOriginCmd:     AT+VSID="%s","%d"

#
# If "glare" during initialization becomes a problem then take
# the modem off-hook during initialization, and then place it
# back on-hook when done.
#
#ModemResetCmds:        "ATH1\nAT+VCID=1"       # enables CallID display
#ModemReadyCmds:        ATH0

Class1AdaptRecvCmd:     AT+FAR=1
Class1TMConnectDelay:   400             # counteract quick CONNECT response

#
# If you have trouble with V.17 receiving or sending,
# you may want to enable one of these, respectively.
#
#Class1RMQueryCmd: "!24,48,72,96" # enable this to disable V.17 receiving
#Class1TMQueryCmd: "!24,48,72,96" # enable this to disable V.17 sending

#
# You'll likely want Caller*ID display (also displays DID) enabled.
#
ModemResetCmds:         AT+VCID=1       # enables CallID display

#
# The pty does not support changing parity.
#
PagerTTYParity:         none

#
# If you are "missing" Caller*ID data on some calls (but not all)
# and if you do not have adequate glare protection you may want to
# not answer based on RINGs, but rather enable the CallIDAnswerLength
# for NDID, disable AT+VCID=1 and do this:
#
#RingsBeforeAnswer: 0
#ModemRingResponse: AT+VRID=1

# Uncomment DATE and TIME if you really want them, but you probably don't.
#CallIDPattern:          "DATE="
#CallIDPattern:          "TIME="
CallIDPattern:          "NMBR="
CallIDPattern:          "NAME="
CallIDPattern:          "ANID="
#CallIDPattern:          "USER="        # username provided by call
#CallIDPattern:          "PASS="        # password provided by call
#CallIDPattern:          "CDID="        # DID context in call
CallIDPattern:          "NDID="
#CallIDAnswerLength:    4



I am very new to this process, so any and all help is greatly appreciated!


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Project hosted by iFAX Solutions